The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Polymeric Material with Metal-Like Conductivity for Next Generation Organic Electronic Devices
Abstract
The reduced pressure synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) with sheet-like morphology has been achieved with the introduction of an amphiphilic triblock copolymer into the oxidant thin film. Addition of the copolymer not only results in an oxidant thin film which remains liquid-like under reduced pressure but also induces structured growth during film formation. PEDOT films were polymerized using the vacuum vapor phase polymerization (VPP) technique, in which we show that maintaining a liquid-like state for the oxidant is essential. The resulting conductivity is equivalent to commercially available indium tin oxide (ITO) with concomitant optical transmission values. PEDOT films can be produced with a variety of thicknesses across a range of substrate materials from plastics to metals to ceramics, with sheet resistances down to 45 Ω/□ (ca. 3400 S·cm –1 ), and transparency in the visible spectrum of >80% at 65 nm thickness. This compares favorably to ITO and its currently touted replacements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH) x
Shirakawa, H., Louis, E. J., MacDiarmid, A. G., Chiang, C. K., & Heeger, A. J. (1977) · Journal of the Chemical Society, Chemical Communications · doi:10.1039/c39770000578 · Cited by 3,867
Cited by
Organic thermoelectric materials for energy harvesting and temperature control
Russ, B., Glaudell, A., Urban, J. J., Chabinyc, M. L., & Segalman, R. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.50 · Cited by 1,296
Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review
Shi, H., Liu, C., Jiang, Q., & Xu, J. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500017 · Cited by 1,200
Highly Conductive PEDOT:PSS Nanofibrils Induced by Solution‐Processed Crystallization
Kim, N., Kee, S., Lee, S. H., Lee, B. H., Kahng, Y. H., Jo, Y., Kim, B., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201304611 · Cited by 1,148
Bubnova, O., Khan, Z. U., Wang, H., Braun, S., Evans, D. R., Fabretto, M., Hojati-Talemi, P., Dagnelund, D., Arlin, J.-B., Geerts, Y. H., et al. (2014) · Nature Materials · doi:10.1038/nmat3824 · Cited by 854
Self-citationGueye, M. N., Carella, A., Faure-Vincent, J., Demadrille, R., & Simonato, J.-P. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100616 · Cited by 682
Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices
Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., Isikgor, F. H., & Ouyang, J. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-2895-5 · Cited by 648
Redox-Active Polymers for Energy Storage Nanoarchitectonics
Kim, J., Kim, J. H., & Ariga, K. (2017) · Joule · doi:10.1016/j.joule.2017.08.018 · Cited by 549
Interfacial Polymerization: From Chemistry to Functional Materials
Zhang, F., Fan, J., & Wang, S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201916473 · Cited by 478
Transparent electrodes for organic optoelectronic devices: a review
Cao, W., Li, J., Chen, H., & Xue, J. (2014) · Journal of Photonics for Energy · doi:10.1117/1.jpe.4.040990 · Cited by 335
Alemu Mengistie, D., Wang, P.-C., & Chu, C.-W. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11726j · Cited by 316
Xu, S., Shi, X.-L., Dargusch, M., Di, C., Zou, J., & Chen, Z.-G. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100840 · Cited by 315
Highly Conductive PEDOT:PSS Treated with Formic Acid for ITO-Free Polymer Solar Cells
Mengistie, D. A., Ibrahem, M. A., Wang, P.-C., & Chu, C.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405024d · Cited by 305
Gueye, M. N., Carella, A., Massonnet, N., Yvenou, E., Brenet, S., Faure-Vincent, J., Pouget, S., Rieutord, F., Okuno, H., Benayad, A., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01035 · Cited by 262
Metadata
- Authors
- Fabretto, M. V., Evans, D. R., Mueller, M., Zuber, K., Hojati-Talemi, P., Short, R. D., Wallace, G. G., & Murphy, P. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-10-08
- Volume
- 24
- Issue
- 20
- Pages
- 3998-4003
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W42593114
- Cited by
- 245
- References
- 1
- FWCI
- 16.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.