Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 352

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Partial Ion-Exchange of Nickel-Sulfide-Derived Electrodes for High Performance Supercapacitors

Wei, Wutao, Mi, Liwei, Gao, Yang, Zheng, Zhi, Chen, Weihua, Guan, Xinxin·2014·Chemistry of Materials

Abstract

A novel method to adjust the composition of a material while maintaining its morphology was described in this study. Nickel sulfide, the material investigated in this work, was found to be useful as a high surface area electrode material for supercapacitor applications. First, a nest-like Ni 3 S 2 @NiS composite electrode with 1D nanorod as structural unit was synthesized by simultaneously using Ni foam as template and Ni as a source through a one-step in situ growth method. Co and Se ions, which respectively acted as beneficial cation and anion, were successfully introduced into the nest-like Ni 3 S 2 @NiS material, resulting in the formation of Ni 3 S 2 @Co 9 S 8 and NiS@NiSe 2 composite electrodes with structures similar to those of the parent materials. The material structure was virtually retained and single-crystal-to-single-crystal transformation was achieved in the process. Introducing the cation and anion into the same type of material while maintaining topology could be important for the field of material synthesis and preparation of supercapacitor electrodes. Moreover, the electrochemical properties of these three materials were studied by cyclic voltammetry measurements and galvanostatic charge–discharge tests. The results indicated that the rate performance was improved significantly by ion exchange. In particular, the derived electrode with Se still showed superior oxidation and reduction ability at high scan rate of 10000 mV s –1 . In addition, the second charge–discharge specific capacity also increased from 516 F g –1 to 925 F g –1 and 1412 F g –1 at the current density of 0.5 A g –1 and by Co and Se exchange, respectively. This work contributes to the knowledge on electrode materials for supercapacitors and can provide good reference for the fabrication of desired materials.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/cm5006482

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 352

Metadata

Authors
Wei, W., Mi, L., Gao, Y., Zheng, Z., Chen, W., & Guan, X.
Venue
Chemistry of Materials
Published
2014-06-02
Volume
26
Issue
11
Pages
3418-3426
ISSN
  • 0897-4756 (ISSN-L)
  • 1520-5002
OpenAlex
W2334124475
Cited by
352
References
36
FWCI
12.79
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.