The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Influence of Defects and Synthesis Conditions on the Photovoltaic Performance of Perovskite Semiconductor CsSnI3
Abstract
CsSnI 3 is a prototype inorganic halide perovskite that has recently been proposed as a strong candidate for photovoltaic applications because of its unique semiconductor properties. Through first-principle calculations, we show that the concentration control of intrinsic defects is critical for optimizing the photovoltaic properties of CsSnI 3 . Under a Sn-poor condition, a high concentration of acceptor defects, such as Sn or Cs vacancies, can form easily and produce a high p-type conductivity and deep-level defects that can become electron–hole recombination centers, all with high energy. This condition is optimal for growing CsSnI 3 as hole-transport material in solar cells. In contrast, when Sn becomes richer, the concentration of acceptor defects decreases; therefore, the p-type conductivity may drop to a moderate level, which can increase the shunt resistance and, thus, the efficiency of the solar cells with CsSnI 3 as the light absorber material (LAM). However, under the Sn-rich condition, the concentration of a deep-level donor defect Sn I will increase, causing electron traping and non-radiative electron–hole recombination. Therefore, we propose that a moderately Sn-rich condition is optimal when CsSnI 3 is used as the LAM. The defect properties of CsSnI 3 are general, and the underlying chemistry is expected to be applicable to other halide perovskite semiconductors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Lany, S., & Zunger, A. (2008) · Physical Review B · doi:10.1103/physrevb.78.235104 · Cited by 1,257
Chung, I., Song, J.-H., Im, J., Androulakis, J., Malliakas, C. D., Li, H., Freeman, A. J., Kenney, J. T., & Kanatzidis, M. G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301539s · Cited by 1,203
Self-consistentGWcalculations for semiconductors and insulators
Shishkin, M., & Kresse, G. (2007) · Physical Review B · doi:10.1103/physrevb.75.235102 · Cited by 966
Brivio, F., Butler, K. T., Walsh, A., & van Schilfgaarde, M. (2014) · Physical Review B · doi:10.1103/physrevb.89.155204 · Cited by 755
Intrinsic point defects and complexes in the quaternary kesterite semiconductorCu2ZnSnS4
Chen, S., Yang, J.-H., Gong, X. G., Walsh, A., & Wei, S.-H. (2010) · Physical Review B · doi:10.1103/physrevb.81.245204 · Cited by 740
Self-citationChemical trends of defect formation and doping limit in II-VI semiconductors: The case of CdTe
Wei, S.-H., & Zhang, S. B. (2002) · Physical Review B · doi:10.1103/physrevb.66.155211 · Cited by 661
Self-citationOvercoming the doping bottleneck in semiconductors
Wei, S.-H. (2004) · Computational Materials Science · doi:10.1016/j.commatsci.2004.02.024 · Cited by 573
Self-citationHuang, L.-Y., & Lambrecht, W. R. L. (2013) · Physical Review B · doi:10.1103/physrevb.88.165203 · Cited by 524
Efficient carrier transport in halide perovskites: theoretical perspectives
Du, M. H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01198h · Cited by 487
Schottky solar cells based on CsSnI3 thin-films
Chen, Z., Wang, J. J., Ren, Y., et al. (2012) · Applied Physics Letters · doi:10.1063/1.4748888 · Cited by 303
Chen, Z., Yu, C., Shum, K., Wang, J. J., Pfenninger, W. M., Vockic, N., Midgley, J., & Kenney, J. T. (2011) · Journal of Luminescence · doi:10.1016/j.jlumin.2011.09.006 · Cited by 257
Synthesis and characterization of CsSnI3 thin films
Shum, K., Chen, Z., Qureshi, J., et al. (2010) · Applied Physics Letters · doi:10.1063/1.3442511 · Cited by 190
Chiarella, F., Zappettini, A., Licci, F., Borriello, I., Cantele, G., Ninno, D., Cassinese, A., & Vaglio, R. (2008) · Physical Review B · doi:10.1103/physrevb.77.045129 · Cited by 144
Cited by
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives
Xiao, Z., Song, Z., & Yan, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803792 · Cited by 1,090
Doping Lanthanide into Perovskite Nanocrystals: Highly Improved and Expanded Optical Properties
Pan, G., Bai, X., Yang, D., Chen, X., Jing, P., Qu, S., Zhang, L., Zhou, D., Zhu, J., Xu, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b04575 · Cited by 935
Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency
Shao, S., Liu, J., Portale, G., Fang, H., Blake, G. R., ten Brink, G. H., Koster, L. J. A., & Loi, M. A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702019 · Cited by 904
Enhanced stability and efficiency in hole-transport-layer-free CsSnI3 perovskite photovoltaics
Marshall, K. P., Walker, M., Walton, R. I., & Hatton, R. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.178 · Cited by 644
Metadata
- Authors
- Xu, P., Chen, S., Xiang, H.-J., Gong, X.-G., & Wei, S.-H.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-10-08
- Volume
- 26
- Issue
- 20
- Pages
- 6068-6072
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2314410995
- Cited by
- 338
- References
- 26
- FWCI
- 7.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.