The DOI matches its Crossref record.
The Preparation of Carbon-Supported Magnesium Nanoparticles using Melt Infiltration
Open accessAbstract
Magnesium dihydride contains 7.7 wt % hydrogen. However, its application for hydrogen storage is impeded by its high stability and slow kinetics. Bringing the size of Mg(H 2 ) into the nanometer range will not only enhance the reaction rates but has also been theoretically predicted to change the thermodynamic stability and destabilize the MgH 2 with respect to Mg. However, the preparation of such small particles is a major challenge. We identified a method to prepare large amounts of nanometer-sized nonoxidized magnesium crystallites. The method is based on infiltration of nanoporous carbon with molten magnesium. The size of the Mg crystallites is directly influenced by the pore size of the carbon and can be varied from 2–5 to less than 2 nm. The majority of the nanocrystallites is not oxidized after preparation. No bulk magnesium was detected in the samples with nanoparticle loadings up to 15 wt % on carbon. These 3D supported nanomaterials present interesting systems to study how nanosizing and support interaction can steer the hydrogen sorption properties of metal hydrides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hydrogen storage in Mg: A most promising material
Jain, I. P., Lal, C., & Jain, A. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.08.088 · Cited by 1,291
Jeon, K.-J., Moon, H. R., Ruminski, A. M., Jiang, B., Kisielowski, C., Bardhan, R., & Urban, J. J. (2011) · Nature Materials · doi:10.1038/nmat2978 · Cited by 731
Yu, X., Tang, Z., Sun, D., Ouyang, L., & Zhu, M. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.03.001 · Cited by 716
Advanced carbon aerogels for energy applications
Biener, J., Stadermann, M., Suss, M., Worsley, M. A., Biener, M. M., Rose, K. A., & Baumann, T. F. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00627k · Cited by 651
Hydrogen in magnesium: new perspectives toward functional stores
Aguey-Zinsou, K.-F., & Ares-Fernández, J.-R. (2010) · Energy & Environmental Science · doi:10.1039/b921645f · Cited by 447
Tailoring magnesium based materials for hydrogen storage through synthesis: Current state of the art
Sun, Y., Shen, C., Lai, Q., Liu, W., Wang, D.-W., & Aguey-Zinsou, K.-F. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.010 · Cited by 436
Review of magnesium hydride-based materials: development and optimisation
Crivello, J.-C., Dam, B., Denys, R. V., Dornheim, M., Grant, D. M., Huot, J., Jensen, T. R., de Jongh, P., Latroche, M., Milanese, C., et al. (2016) · Applied Physics A · doi:10.1007/s00339-016-9602-0 · Cited by 409
Self-citationMetal hydrides for lithium-ion batteries
Oumellal, Y., Rougier, A., Nazri, G. A., Tarascon, J.-M., & Aymard, L. (2008) · Nature Materials · doi:10.1038/nmat2288 · Cited by 395
Empowering hydrogen storage performance of MgH2 by nanoengineering and nanocatalysis
Zhang, X. L., Liu, Y. F., Zhang, X., Hu, J. J., Gao, M. X., & Pan, H. G. (2020) · Materials Today Nano · doi:10.1016/j.mtnano.2019.100064 · Cited by 363
Ren, L., Li, Y., Zhang, N., Li, Z., Lin, X., Zhu, W., Lu, C., Ding, W., & Zou, J. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01041-5 · Cited by 309
Lu, J., Choi, Y. J., Fang, Z. Z., Sohn, H. Y., & Rönnebro, E. (2009) · Journal of the American Chemical Society · doi:10.1021/ja906340u · Cited by 279
Confinement of MgH2Nanoclusters within Nanoporous Aerogel Scaffold Materials
Nielsen, T. K., Manickam, K., Hirscher, M., Besenbacher, F., & Jensen, T. R. (2009) · ACS Nano · doi:10.1021/nn901072w · Cited by 261
Metadata
- Authors
- de Jongh, P. E., Wagemans, R. W. P., Eggenhuisen, T. M., Dauvillier, B. S., Radstake, P. B., Meeldijk, J. D., Geus, J. W., & de Jong, K. P.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-10-26
- Volume
- 19
- Issue
- 24
- Pages
- 6052-6057
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1975151846
- Cited by
- 216
- References
- 0
- FWCI
- 6.03
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.