The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
3D Flowerlike α-Nickel Hydroxide with Enhanced Electrochemical Activity Synthesized by Microwave-Assisted Hydrothermal Method
Abstract
Nickel hydroxide has received increased attention especially due to its electrochemical properties and potential applications in rechargeable Ni-base alkaline batteries, e.g., Ni/Cd, Ni/Zn, and Ni/MH. Ni(OH) 2 has a hexagonal layered structure with two polymorphs, α- and β-Ni(OH) 2 . α-Ni(OH) 2 shows superior electrochemical properties compared to those of the β-form. Nanosized flowerlike α-nickel hydroxide materials with an interlayer spacing of 7.0 Å have been prepared by a microwave-assisted hydrothermal method. The experimental results from XRD and FT-IR showed that the Ni(OH) 2 sample prepared by this method had the typical α-phase. FE-SEM images showed many uniform flowerlike architectures with diameters of 700 nm−1µm which consisted of the aggregated flakes. TEM results showed the flakes were built up from many nanocrystals with 2–3 nm diameters. TGA and TPD were employed to investigate thermal stability and gas evolution during the heating process. α-Nickel hydroxide was transferred to NiO with a cubic crystalline structure after being calcined at 450 °C; the NiO still kept the morphology of α-Ni(OH) 2 . Cyclic voltammetry was used to determine the electrochemical properties of the Ni(OH) 2 electrode in 1 M KOH. α-Ni(OH) 2 prepared by MW-HT had the best electrochemical activity for the electrochemical reduction of O 2 compared with α-Ni(OH) 2 synthesized by conventional HT methods and β-Ni(OH) 2 . The effects of nickel sources and precipitators on the phase and morphology of the products were studied. Conventional hydrothermal methods were used to study the role of microwave irradiation. The possible growth mechanism is discussed here. The CV experiments showed that H 2 O 2 can be reduced to OH − on the α-Ni(OH) 2 electrode. The Levich equation was used to calculate the number of electrons transferred during the O 2 redox reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self‐Assembled 3D Flowerlike Iron Oxide Nanostructures and Their Application in Water Treatment
Zhong, L. ‐., Hu, J. ‐., Liang, H. ‐., Cao, A. ‐., Song, W. ‐., & Wan, L. ‐. (2006) · Advanced Materials · doi:10.1002/adma.200600504 · Cited by 1,587
Review of the structure and the electrochemistry of nickel hydroxides and oxy-hydroxides
Oliva, P., Leonardi, J., Laurent, J. F., Delmas, C., Braconnier, J. J., Figlarz, M., Fievet, F., & Guibert, A. D. (1982) · Journal of Power Sources · doi:10.1016/0378-7753(82)80057-8 · Cited by 933
Mesoscale Organization of CuO Nanoribbons: Formation of “Dandelions”
Liu, B., & Zeng, H. C. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048195o · Cited by 813
Microwave‐Assisted Synthesis of Metallic Nanostructures in Solution
Tsuji, M., Hashimoto, M., Nishizawa, Y., Kubokawa, M., & Tsuji, T. (2005) · Chemistry – A European Journal · doi:10.1002/chem.200400417 · Cited by 699
Microwave Synthesis of Nanoporous Materials
Tompsett, G. A., Conner, W. C., & Yngvesson, K. S. (2006) · ChemPhysChem · doi:10.1002/cphc.200500449 · Cited by 643
A Nickel Metal Hydride Battery for Electric Vehicles
Ovshinsky, S. R., Fetcenko, M. A., & Ross, J. (1993) · Science · doi:10.1126/science.260.5105.176 · Cited by 602
Nickel-based rechargeable batteries
Shukla, A. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00890-4 · Cited by 401
Fabrication of β-Ni(OH)2 and NiO hollow spheres by a facile template-free process
Wang, Y., Zhu, Q., & Zhang, H. (2005) · Chemical Communications · doi:10.1039/b508807k · Cited by 246
Oxygen electrocatalysis in alkaline electrolyte: Pt(hkl), Au(hkl) and the effect of Pd-modification
Schmidt, T. J., Stamenkovic, V., Arenz, M., Markovic, N. M., & Ross, P. N. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00347-x · Cited by 238
Wang, D., Song, C., Hu, Z., & Fu, X. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp046797o · Cited by 204
Cited by
Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3−x
Kim, H.-S., Cook, J. B., Lin, H., Ko, J. S., Tolbert, S. H., Ozolins, V., & Dunn, B. (2017) · Nature Materials · doi:10.1038/nmat4810 · Cited by 2,166
Yan, J., Fan, Z., Sun, W., Ning, G., Wei, T., Zhang, Q., Zhang, R., Zhi, L., & Wei, F. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102839 · Cited by 1,994
Asymmetric Supercapacitor Electrodes and Devices
Choudhary, N., Li, C., Moore, J., Nagaiah, N., Zhai, L., Jung, Y., & Thomas, J. (2017) · Advanced Materials · doi:10.1002/adma.201605336 · Cited by 1,421
Chen, H., Hu, L., Chen, M., Yan, Y., & Wu, L. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301747 · Cited by 1,419
Efficient Water Oxidation Using Nanostructured α-Nickel-Hydroxide as an Electrocatalyst
Gao, M., Sheng, W., Zhuang, Z., Fang, Q., Gu, S., Jiang, J., & Yan, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502128j · Cited by 1,322
Developments and perspectives of oxide-based catalysts for the oxygen evolution reaction
Fabbri, E., Habereder, A., Waltar, K., Kötz, R., & Schmidt, T. J. (2014) · Catal. Sci. Technol. · doi:10.1039/c4cy00669k · Cited by 1,303
Nickel hydroxides and related materials: a review of their structures, synthesis and properties
Hall, D. S., Lockwood, D. J., Bock, C., & MacDougall, B. R. (2015) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2014.0792 · Cited by 1,043
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Self-citationMicrowave-Assisted Preparation of Inorganic Nanostructures in Liquid Phase
Zhu, Y.-J., & Chen, F. (2014) · Chemical Reviews · doi:10.1021/cr400366s · Cited by 912
Microwave‐Assisted Synthesis of Colloidal Inorganic Nanocrystals
Baghbanzadeh, M., Carbone, L., Cozzoli, P. D., & Kappe, C. O. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101274 · Cited by 797
Kate, R. S., Khalate, S. A., & Deokate, R. J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.10.262 · Cited by 574
Hydrothermal synthetic strategies of inorganic semiconducting nanostructures
Shi, W., Song, S., & Zhang, H. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60012b · Cited by 548
Lei, Y., Li, J., Wang, Y., Gu, L., Chang, Y., Yuan, H., & Xiao, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am404765y · Cited by 540
Xu, L., Hu, Y.-L., Pelligra, C., Chen, C.-H., Jin, L., Huang, H., Sithambaram, S., Aindow, M., Joesten, R., & Suib, S. L. (2009) · Chemistry of Materials · doi:10.1021/cm900608d · Cited by 492
Self-citationMeher, S. K., Justin, P., & Ranga Rao, G. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200294k · Cited by 463
Jiang, H., Zhao, T., Li, C., & Ma, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03830j · Cited by 457
Leng, J., Wang, Z., Wang, J., Wu, H.-H., Yan, G., Li, X., Guo, H., Liu, Y., Zhang, Q., & Guo, Z. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00904j · Cited by 425
Liu, G., Li, P., Zhao, G., Wang, X., Kong, J., Liu, H., Zhang, H., Chang, K., Meng, X., Kako, T., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05190 · Cited by 420
Faraji, S., & Ani, F. N. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.144 · Cited by 417
Synthesis of molybdenum disulfide (MoS2) for lithium ion battery applications
Feng, C., Ma, J., Li, H., Zeng, R., Guo, Z., & Liu, H. (2009) · Materials Research Bulletin · doi:10.1016/j.materresbull.2009.05.018 · Cited by 385
Meher, S. K., Justin, P., & Ranga Rao, G. (2011) · Nanoscale · doi:10.1039/c0nr00555j · Cited by 321
Wang, L., Dong, Z. H., Wang, Z. G., Zhang, F. X., & Jin, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202786 · Cited by 311
Ultrafast high-capacity NiZn battery with NiAlCo-layered double hydroxide
Gong, M., Li, Y., Zhang, H., Zhang, B., Zhou, W., Feng, J., Wang, H., Liang, Y., Fan, Z., Liu, J., et al. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00317a · Cited by 309
Yu, X., Zhang, M., Yuan, W., & Shi, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01034a · Cited by 306
A Perspective on Low-Temperature Water Electrolysis – Challenges in Alkaline and Acidic Technology
Schalenbach, M., Zeradjanin, A. R., Kasian, O., Cherevko, S., & Mayrhofer, K. J. J. (2018) · International Journal of Electrochemical Science · doi:10.20964/2018.02.26 · Cited by 305
Miao, Y., Ouyang, L., Zhou, S., Xu, L., Yang, Z., Xiao, M., & Ouyang, R. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.10.008 · Cited by 290
Self-citationSk, M. M., Yue, C. Y., Ghosh, K., & Jena, R. K. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.056 · Cited by 289
Pang, H., Wei, C., Li, X., Li, G., Ma, Y., Li, S., Chen, J., & Zhang, J. (2014) · Scientific Reports · doi:10.1038/srep03577 · Cited by 271
Chen, H., Zhou, S., & Wu, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5014375 · Cited by 269
Metadata
- Authors
- Xu, L., Ding, Y.-S., Chen, C.-H., Zhao, L., Rimkus, C., Joesten, R., & Suib, S. L.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-12-12
- Volume
- 20
- Issue
- 1
- Pages
- 308-316
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1988279721
- Cited by
- 454
- References
- 25
- FWCI
- 9.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.