The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
High-Rate LiFePO4 Lithium Rechargeable Battery Promoted by Electrochemically Active Polymers
Abstract
LiFePO 4 is a promising cathode material for the next generation of a lithium-ion rechargeable battery because of its low-cost, safety, excellent cyclability, and large capacity. Moreover, its voltage, 3.45 V versus lithium, is compatible with the window of a solid-polymer Li-ion electrolyte. Of particular interest for commercial applications is its safety and energy capacity at high power output and at short recharge times. We report here a systematic investigation of the enhancement of capacity at high rates of charge and discharge by substitution of a conductive, electrochemically active polymer for some or all of the deadweight conductive carbon and binder used conventionally to enhance performance of a secondary battery. Polypyrrole (PPy) and polyaniline (PANI) were used as the conductive polymers; two methods, electrochemical deposition and simultaneous chemical polymerization, were used to prepare the LiFePO 4 /polymer composite cathodes. Our results show that significantly improved capacity and rate capability can be achieved in such composite cathodes and that the electrodeposited carbon-coated LiFePO 4 /PPy composite exhibits the best performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationApproaching Theoretical Capacity of LiFePO[sub 4] at Room Temperature at High Rates
Huang, H., Yin, S.-C., & Nazar, L. F. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1396695 · Cited by 1,407
Electron Microscopy Study of the LiFePO[sub 4] to FePO[sub 4] Phase Transition
Chen, G., Song, X., & Richardson, T. J. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2192695 · Cited by 583
Conducting‐Polymer/Iron‐Redox‐ Couple Composite Cathodes for Lithium Secondary Batteries
Park, K., Schougaard, S. B., & Goodenough, J. B. (2007) · Advanced Materials · doi:10.1002/adma.200600369 · Cited by 410
Self-citationImproving Lithium Batteries by Tethering Carbon-Coated LiFePO[sub 4] to Polypyrrole
Huang, Y., Park, K.-S., & Goodenough, J. B. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2360769 · Cited by 180
Self-citationLiFePO4/polymer/natural graphite: low cost Li-ion batteries
Zaghib, K., Striebel, K. A., Guerfi, A., et al. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.02.073 · Cited by 155
Synthesis and characterization of polypyrrole/vanadium pentoxide nanocomposite aerogels
Wong, H. P., Dave, B. C., Leroux, F., Harreld, J. H., Dunn, B., & Nazar, L. F. (1998) · Journal of Materials Chemistry · doi:10.1039/a706614g · Cited by 111
216th Electrochemical Society Meeting
北村尚斗 (2010) · Medical Entomology and Zoology · Cited by 99
An investigation into the degradation of polyaniline films grown on iron from oxalic acid
Fenelon, A. M., & Breslin, C. B. (2004) · Synthetic Metals · doi:10.1016/j.synthmet.2004.02.014 · Cited by 46
Cited by
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
Towards sustainable and versatile energy storage devices: an overview of organic electrode materials
Song, Z., & Zhou, H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40709h · Cited by 1,443
Development and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Self-citationPolymer-Based Organic Batteries
Muench, S., Wild, A., Friebe, C., Häupler, B., Janoschka, T., & Schubert, U. S. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00070 · Cited by 1,163
A review of advanced and practical lithium battery materials
Marom, R., Amalraj, S. F., Leifer, N., Jacob, D., & Aurbach, D. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04225k · Cited by 1,075
Toward Flexible Polymer and Paper‐Based Energy Storage Devices
Nyholm, L., Nyström, G., Mihranyan, A., & Strømme, M. (2011) · Advanced Materials · doi:10.1002/adma.201004134 · Cited by 1,066
Wang, J., & Sun, X. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee01263k · Cited by 1,030
Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
Ding, J., Hu, W., Paek, E., & Mitlin, D. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00116 · Cited by 970
Opportunities and Challenges for Organic Electrodes in Electrochemical Energy Storage
Poizot, P., Gaubicher, J., Renault, S., Dubois, L., Liang, Y., & Yao, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00482 · Cited by 963
Applications of lithium-ion batteries in grid-scale energy storage systems
Chen, T., Jin, Y., Lv, H., Yang, A., Liu, M., Chen, B., Xie, Y., & Chen, Q. (2020) · Transactions of Tianjin University · doi:10.1007/s12209-020-00236-w · Cited by 692
Wu, F., Chen, J., Chen, R., Wu, S., Li, L., Chen, S., & Zhao, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1114724 · Cited by 520
Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks
Milczarek, G., & Inganäs, O. (2012) · Science · doi:10.1126/science.1215159 · Cited by 510
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201100637 · Cited by 487
Xia, X., Zhu, C., Luo, J., Zeng, Z., Guan, C., Ng, C. F., Zhang, H., & Fan, H. J. (2014) · Small · doi:10.1002/smll.201302224 · Cited by 445
Shin, J.-Y., Joo, J. H., Samuelis, D., & Maier, J. (2012) · Chemistry of Materials · doi:10.1021/cm2031009 · Cited by 401
Materials insights into low-temperature performances of lithium-ion batteries
Zhu, G., Wen, K., Lv, W., Zhou, X., Liang, Y., Yang, F., Chen, Z., Zou, M., Li, J., Zhang, Y., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.056 · Cited by 367
Hybrid supercapacitor-battery materials for fast electrochemical charge storage
Vlad, A., Singh, N., Rolland, J., Melinte, S., Ajayan, P. M., & Gohy, J.-F. (2014) · Scientific Reports · doi:10.1038/srep04315 · Cited by 334
Highly Conductive, Lightweight, Low‐Tortuosity Carbon Frameworks as Ultrathick 3D Current Collectors
Chen, C., Zhang, Y., Li, Y., Kuang, Y., Song, J., Luo, W., Wang, Y., Yao, Y., Pastel, G., Xie, J., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700595 · Cited by 297
Srivastava, S., Schaefer, J. L., Yang, Z., Tu, Z., & Archer, L. A. (2014) · Advanced Materials · doi:10.1002/adma.201303070 · Cited by 290
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
Metadata
- Authors
- Huang, Y.-H., & Goodenough, J. B.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-11-14
- Volume
- 20
- Issue
- 23
- Pages
- 7237-7241
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2020353267
- Cited by
- 374
- References
- 9
- FWCI
- 17.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.