The DOI matches its Crossref record.
“Zincone” Zinc Oxide−Organic Hybrid Polymer Thin Films Formed by Molecular Layer Deposition
Abstract
Hybrid organic−inorganic polymer thin films of the form (−O−Zn−O−C 2 H 4 −) n have been deposited from diethyl zinc and ethylene glycol using molecular layer deposition (MLD) over a range of substrate temperatures between 100 and 170 °C. Infrared transmission confirms that the films consist of Zn−O and ethylene-oxide units. In analogy with known alucone polymers of the form (−O−Al−O−R−) n, the zinc-based hybrid material is an example of a “zincone” polymer. In situ quartz crystal microbalance analysis indicated that the sequential surface reactions of diethyl zinc and ethylene glycol are sufficiently self-limiting and saturating to enable well-controlled MLD growth. Quantitative analysis of in situ quartz crystal microbalance and film thickness results indicate that ethylene glycol molecules can undergo a “double reaction” where the OH groups on both ends of the diol react with available Zn−C 2 H 5 surface sites to produce a relatively inert bridging alkane. The mass uptake per MLD cycle during Zn−hybrid film deposition decreases with increasing reaction temperature. Infrared transmission spectroscopy also shows that Zn−organic hybrid films are stable in dry air. However, the as-deposited ZnO−hybrid material could be hydrolyzed by H 2 O (for example, in ambient) resulting in films consisting of zinc oxide and zinc hydroxide with some carbon remnants. Spectroscopic ellipsometry indicates the thickness of hydrolyzed films increases linearly with reaction cycles, and scanning probe and transmission electron microscopy images show the hydrolyzed ZnO−hybrid film coating is uniform and conformal. The transmission electron micrographs also show the hydrolyzed Zn−hybrid films contain nanoscale porosity. These results suggest new pathways to fabricate organic−inorganic hybrid materials, including metal-organic framework structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Molecular Interactions Driving the Layer-by-Layer Assembly of Multilayers
Borges, J., & Mano, J. F. (2014) · Chemical Reviews · doi:10.1021/cr400531v · Cited by 882
Advances in metal–organic framework coatings: versatile synthesis and broad applications
Meng, J., Liu, X., Niu, C., Pang, Q., Li, J., Liu, F., Liu, Z., & Mai, L. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00806c · Cited by 516
Chemical Vapor Deposition of Conformal, Functional, and Responsive Polymer Films
Alf, M. E., Asatekin, A., Barr, M. C., Baxamusa, S. H., Chelawat, H., Ozaydin‐Ince, G., Petruczok, C. D., Sreenivasan, R., Tenhaeff, W. E., Trujillo, N. J., et al. (2010) · Advanced Materials · doi:10.1002/adma.200902765 · Cited by 399
Meng, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04449f · Cited by 260
Liu, J., Zhu, J., Tian, M., Gu, X., Schmidt, A., & Yang, R. (2013) · Review of Scientific Instruments · doi:10.1063/1.4797479 · Cited by 163
Metadata
- Authors
- Peng, Q., Gong, B., VanGundy, R. M., & Parsons, G. N.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-02-12
- Volume
- 21
- Issue
- 5
- Pages
- 820-830
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1977292655
- Cited by
- 189
- References
- 0
- FWCI
- 12.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: “Zincone” Zinc Oxide−Organic Hybrid Polymer Thin Films Formed by Molecular Layer Deposition. https://app.cochat.ai/papers/10.1021/cm8020403
- The paper
- Peng, Q., Gong, B., VanGundy, R. M., & Parsons, G. N. (2009). “Zincone” Zinc Oxide−Organic Hybrid Polymer Thin Films Formed by Molecular Layer Deposition. Chemistry of Materials. https://doi.org/10.1021/cm8020403
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.