The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Materials for Solid Oxide Fuel Cells
Abstract
Solid oxide fuel cells (SOFCs) have the promise to improve energy efficiency and to provide society with a clean energy producing technology. The high temperature of operation (500−1000 °C) enables the solid oxide fuel cell to operate with existing fossil fuels and to be efficiently coupled with turbines to give very high efficiency conversion of fuels to electricity. Solid oxide fuel cells are complex electrochemical devices that contain three basic components, a porous anode, an electrolyte membrane, and a porous cathode. In this short review, a survey of the types and properties of materials that have been considered for each of these components is presented with an emphasis on the requirements for operation at intermediate temperature (500−800 °C). Some directions for future research are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Physical, chemical and electrochemical properties of pure and doped ceria
Mogensen, M. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00318-5 · Cited by 2,094
Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C
Steele, B. C. H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00319-7 · Cited by 2,078
Direct oxidation of hydrocarbons in a solid-oxide fuel cell
Park, S., Vohs, J. M., & Gorte, R. J. (2000) · Nature · doi:10.1038/35005040 · Cited by 1,894
Doped LaGaO3 Perovskite Type Oxide as a New Oxide Ionic Conductor
Ishihara, T., Matsuda, H., & Takita, Y. (1994) · Journal of the American Chemical Society · doi:10.1021/ja00088a016 · Cited by 1,707
Ceria-based solid electrolytes
Inaba, H. (1996) · Solid State Ionics · doi:10.1016/0167-2738(95)00229-4 · Cited by 1,543
Ormerod, R. M. (2003) · Chemical Society Reviews · doi:10.1039/b105764m · Cited by 1,531
Nanoionics: ion transport and electrochemical storage in confined systems
Maier, J. (2005) · Nature Materials · doi:10.1038/nmat1513 · Cited by 1,460
Cited by
Solution Combustion Synthesis of Nanoscale Materials
Varma, A., Mukasyan, A. S., Rogachev, A. S., & Manukyan, K. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00279 · Cited by 1,453
Recent advances in high temperature electrolysis using solid oxide fuel cells: A review
Laguna-Bercero, M. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.019 · Cited by 1,156
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Prediction of solid oxide fuel cell cathode activity with first-principles descriptors
Lee, Y.-L., Kleis, J., Rossmeisl, J., Shao-Horn, Y., & Morgan, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02032c · Cited by 659
A review of cathode materials and structures for rechargeable lithium–air batteries
Ma, Z., Yuan, X., Li, L., Ma, Z.-F., Wilkinson, D. P., Zhang, L., & Zhang, J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00838g · Cited by 485
Metadata
- Authors
- Jacobson, A. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-20
- Volume
- 22
- Issue
- 3
- Pages
- 660-674
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2009484349
- Cited by
- 1,366
- References
- 71
- FWCI
- 29.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Materials for Solid Oxide Fuel Cells. https://app.cochat.ai/papers/10.1021/cm902640j
- The paper
- Jacobson, A. J. (2010). Materials for Solid Oxide Fuel Cells. Chemistry of Materials. https://doi.org/10.1021/cm902640j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
