The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Materials for Solid Oxide Fuel Cells
Abstract
Solid oxide fuel cells (SOFCs) have the promise to improve energy efficiency and to provide society with a clean energy producing technology. The high temperature of operation (500−1000 °C) enables the solid oxide fuel cell to operate with existing fossil fuels and to be efficiently coupled with turbines to give very high efficiency conversion of fuels to electricity. Solid oxide fuel cells are complex electrochemical devices that contain three basic components, a porous anode, an electrolyte membrane, and a porous cathode. In this short review, a survey of the types and properties of materials that have been considered for each of these components is presented with an emphasis on the requirements for operation at intermediate temperature (500−800 °C). Some directions for future research are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Physical, chemical and electrochemical properties of pure and doped ceria
Mogensen, M. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00318-5 · Cited by 2,094
Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C
Steele, B. C. H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00319-7 · Cited by 2,078
Direct oxidation of hydrocarbons in a solid-oxide fuel cell
Park, S., Vohs, J. M., & Gorte, R. J. (2000) · Nature · doi:10.1038/35005040 · Cited by 1,894
Doped LaGaO3 Perovskite Type Oxide as a New Oxide Ionic Conductor
Ishihara, T., Matsuda, H., & Takita, Y. (1994) · Journal of the American Chemical Society · doi:10.1021/ja00088a016 · Cited by 1,707
Ceria-based solid electrolytes
Inaba, H. (1996) · Solid State Ionics · doi:10.1016/0167-2738(95)00229-4 · Cited by 1,543
Ormerod, R. M. (2003) · Chemical Society Reviews · doi:10.1039/b105764m · Cited by 1,531
Nanoionics: ion transport and electrochemical storage in confined systems
Maier, J. (2005) · Nature Materials · doi:10.1038/nmat1513 · Cited by 1,460
Advanced anodes for high-temperature fuel cells
Atkinson, A., Barnett, S., Gorte, R. J., Irvine, J. T. S., McEvoy, A. J., Mogensen, M., Singhal, S. C., & Vohs, J. (2004) · Nature Materials · doi:10.1038/nmat1040 · Cited by 1,427
A direct-methane fuel cell with a ceria-based anode
Murray, E. P., Tsai, T., & Barnett, S. A. (1999) · Nature · doi:10.1038/23220 · Cited by 1,305
A redox-stable efficient anode for solid-oxide fuel cells
Tao, S., & Irvine, J. T. S. (2003) · Nature Materials · doi:10.1038/nmat871 · Cited by 1,249
Nanoionics: ion transport and electrochemical storage in confined systems
MAIER, J. (2010) · Materials for Sustainable Energy · doi:10.1142/9789814317665_0023 · Cited by 1,202
Science and Technology of Ceramic Fuel Cells
(1995) · Elsevier eBooks · doi:10.1016/b978-0-444-89568-4.x5001-4 · Cited by 1,181
Double Perovskites as Anode Materials for Solid-Oxide Fuel Cells
Huang, Y.-H., Dass, R. I., Xing, Z.-L., & Goodenough, J. B. (2006) · Science · doi:10.1126/science.1125877 · Cited by 1,070
Electrical properties of solid oxide electrolytes
Etsell, T. H., & Flengas, S. N. (1970) · Chemical Reviews · doi:10.1021/cr60265a003 · Cited by 1,014
A redox-stable efficient anode for solid-oxide fuel cells
Tao, S., & Irvine, J. T. S. (2010) · Co-Published with Macmillan Publishers Ltd, UK eBooks · doi:10.1142/9789814317665_0037 · Cited by 917
Electrical properties of ceria-based oxides and their application to solid oxide fuel cells
EGUCHI, K., SETOGUCHI, T., INOUE, T., & ARAI, H. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90102-u · Cited by 898
Direct Hydrocarbon Solid Oxide Fuel Cells
McIntosh, S., & Gorte, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020725g · Cited by 897
Designing fast oxide-ion conductors based on La2Mo2O9
Lacorre, P., Goutenoire, F., Bohnke, O., Retoux, R., & Laligant, Y. (2000) · Nature · doi:10.1038/35009069 · Cited by 736
Jiang, S. P. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2966-6 · Cited by 721
Direct Hydrocarbon Solid Oxide Fuel Cells
van den Bossche, M., & McIntosh, S. (2012) · Springer eBooks · doi:10.1007/978-1-4614-5785-5_3 · Cited by 686
A thermally self-sustained micro solid-oxide fuel-cell stack with high power density
Shao, Z., Haile, S. M., Ahn, J., Ronney, P. D., Zhan, Z., & Barnett, S. A. (2005) · Nature · doi:10.1038/nature03673 · Cited by 626
Recent anode advances in solid oxide fuel cells
Sun, C., & Stimming, U. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.086 · Cited by 598
Huang, K., Tichy, R. S., & Goodenough, J. B. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02662.x · Cited by 592
Kim, G., Wang, S., Jacobson, A. J., Reimus, L., Brodersen, P., & Mims, C. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b618345j · Cited by 588
Self-citationThermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate
Marina, O. A. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00140-6 · Cited by 583
Maignan, A., Martin, C., Pelloquin, D., Nguyen, N., & Raveau, B. (1999) · Journal of Solid State Chemistry · doi:10.1006/jssc.1998.7934 · Cited by 581
An Octane-Fueled Solid Oxide Fuel Cell
Zhan, Z., & Barnett, S. A. (2005) · Science · doi:10.1126/science.1109213 · Cited by 538
Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid-Oxide Fuel Cell
Gorte, R. J., Park, S., Vohs, J. M., & Wang, C. (2000) · Advanced Materials · doi:10.1002/1521-4095(200010)12:19<1465::aid-adma1465>3.0.co;2-9 · Cited by 465
Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells
Mai, A., Haanappel, V. A. C., Uhlenbruck, S., Tietz, F., & Stöver, D. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.03.009 · Cited by 438
Alternative anode materials for solid oxide fuel cells
Goodenough, J. B., & Huang, Y.-H. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.08.011 · Cited by 426
Recent advances in Perovskite-type materials for solid oxide fuel cell cathodes
Skinner, S. J. (2001) · International Journal of Inorganic Materials · doi:10.1016/s1466-6049(01)00004-6 · Cited by 417
Redox Cycling of Ni‐Based Solid Oxide Fuel Cell Anodes: A Review
Sarantaridis, D., & Atkinson, A. (2007) · Fuel Cells · doi:10.1002/fuce.200600028 · Cited by 416
Disruption of extended defects in solid oxide fuel cell anodes for methane oxidation
Ruiz-Morales, J. C., Canales‐Vázquez, J., Savaniu, C. D., Marrero‐López, D., Zhou, W., & Irvine, J. T. S. (2006) · Nature · doi:10.1038/nature04438 · Cited by 405
Ionic conductivity of lanthanoid silicates, Ln10(SiO4)6O3(Ln = La, Nd, Sm, Gd, Dy, Y, Ho, Er and Yb)
Nakayama, S., Kageyama, T., Aono, H., & Sadaoka, Y. (1995) · Journal of Materials Chemistry · doi:10.1039/jm9950501801 · Cited by 398
Electrical conductivity of the ZrO2–Ln2O3 (Ln=lanthanides) system
Arachi, Y. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(98)00540-2 · Cited by 379
Cu-Ni Cermet Anodes for Direct Oxidation of Methane in Solid-Oxide Fuel Cells
Kim, H. W., Lu, C., Worrell, W. L., Vohs, J. M., & Gorte, R. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1445170 · Cited by 368
Chen, D., Ran, R., Zhang, K., Wang, J., & Shao, Z. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.045 · Cited by 358
Survey of materials selection for ceramic fuel cells II. Cathodes and anodes
Steele, B. C. H. (1996) · Solid State Ionics · doi:10.1016/0167-2738(96)00291-3 · Cited by 353
Kendrick, E., Islam, M. S., & Slater, P. R. (2007) · Journal of Materials Chemistry · doi:10.1039/b704426g · Cited by 274
Tolchard, J. R., Islam, M. S., & Slater, P. R. (2003) · Journal of Materials Chemistry · doi:10.1039/b302748c · Cited by 272
Factors controlling the oxide ion conductivity of fluorite and perovskite structured oxides
Mogensen, M. B., Lybye, D., Bonanos, N., Hendriksen, P. V., & Poulsen, F. W. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.07.036 · Cited by 255
Oxide anode materials for solid oxide fuel cells
Fergus, J. W. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.07.012 · Cited by 242
Electrical Properties of Yttrium-Doped Strontium Titanate under Reducing Conditions
Hui, S. R., & Petric, A. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1420706 · Cited by 227
Evaluation of yttrium-doped SrTiO3 as an anode for solid oxide fuel cells
Hui, S. R., & Petric, A. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(01)00485-x · Cited by 205
Chen, Z., Ran, R., Zhou, W., Shao, Z., & Liu, S. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.06.010 · Cited by 205
Interaction between La(Sr)FeO3 SOFC cathode and YSZ electrolyte
Simner, S. P., Shelton, J. P., Anderson, M. D., & Stevenson, J. W. (2003) · Solid State Ionics · doi:10.1016/s0167-2738(03)00158-9 · Cited by 194
Discovery and characterization of novel oxide anodes for solid oxide fuel cells
Tao, S., & Irvine, J. T. S. (2004) · The Chemical Record · doi:10.1002/tcr.20003 · Cited by 193
Evaluation of the La2Ni1−xCuxO4+δ system as SOFC cathode material with 8YSZ and LSGM as electrolytes
Aguadero, A., Alonso, J. A., ESCUDERO, M., & Daza, L. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.01.099 · Cited by 180
Kim, J., Cassidy, M., Irvine, J. T. S., & Bae, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3110989 · Cited by 170
Kim, J., Prado, F. D., & Manthiram, A. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2965792 · Cited by 164
Tailoring Oxygen Content on PrBaCo2O5+δ Layered Cobaltites
Frontera, C., Caneiro, A., Carrillo, A. E., Oró‐Solé, J., & García-Muñoz, J. L. (2005) · Chemistry of Materials · doi:10.1021/cm051148q · Cited by 150
JIANG, S., Chen, X., CHAN, S., Kwok, J. T., & Khor, K. A. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.09.010 · Cited by 146
Islam, M. S., Tolchard, J. R., & Slater, P. R. (2003) · Chemical Communications · doi:10.1039/b301179h · Cited by 141
Corbel, G., Laligant, Y., Goutenoire, F., Suard, E., & Lacorre, P. (2005) · Chemistry of Materials · doi:10.1021/cm0501214 · Cited by 129
Performance Variability of La(Sr)FeO[sub 3] SOFC Cathode with Pt, Ag, and Au Current Collectors
Simner, S. P., Anderson, M. D., Pederson, L. R., & Stevenson, J. W. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1995687 · Cited by 129
Huang, K., Tichy, R. S., & Goodenough, J. B. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02663.x · Cited by 129
Peters, C., Weber, A., & Ivers‐Tiffée, E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2909552 · Cited by 109
Reducibility of fast oxide-ion conductors La 2−x R x Mo 2−y W y O 9 (R = Nd, Gd)
Georges, S., Goutenoire, F., Laligant, Y., & Lacorre, P. (2003) · Journal of Materials Chemistry · doi:10.1039/b303957a · Cited by 106
Thermochemistry of La 1 - x Sr x FeO 3 - δ Solid Solutions (0.0 ≤ x ≤ 1.0, 0.0 ≤ δ ≤ 0.5)
Cheng, J., Navrotsky, A., Zhou, X.-D., & Anderson, H. U. (2005) · Chemistry of Materials · doi:10.1021/cm048613o · Cited by 91
Modelling of ambipolar transport properties of composite mixed ionic-electronic conductors
Wu, Z. (1996) · Solid State Ionics · doi:10.1016/s0167-2738(96)00521-8 · Cited by 85
Preparation and properties of rare earth co-doped Ce0.8Sm0.2−xYxO1.9 electrolyte materials for SOFC
Sha, X., Lü, Z., Huang, X., Miao, J., Li, J., Xin, X., & Su, W. (2006) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.12.061 · Cited by 83
Electrochemical performance of La-doped Sr2MgMoO6−δ in natural gas
Ji, Y., Huang, Y.-H., Ying, J., & Goodenough, J. B. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.04.006 · Cited by 79
Escudero, M. J., Irvine, J. T. S., & Daza, L. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.132 · Cited by 66
Stability of Materials as Candidates for Sulfur-Resistant Anodes of Solid Oxide Fuel Cells
Cheng, Z., Zha, S., & Liu, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2198107 · Cited by 57
Guan, X., Zhou, H., Wang, Y., & Zhang, J. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2007.09.116 · Cited by 54
Oxidative reforming of methane using solid oxide fuel cell with LaGaO3-based electrolyte
Ishihara, T. (1995) · Solid State Ionics · doi:10.1016/0167-2738(95)00090-s · Cited by 51
Oishi, N., Atkinson, A., Brandon, N. P., Kilner, J. A., & Steele, B. C. H. (2005) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00251.x · Cited by 47
Choi, Y., Mebane, D. S., Wang, J., & Liu, M. (2007) · Topics in Catalysis · doi:10.1007/s11244-007-9011-x · Cited by 34
Cited by
Solution Combustion Synthesis of Nanoscale Materials
Varma, A., Mukasyan, A. S., Rogachev, A. S., & Manukyan, K. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00279 · Cited by 1,453
Recent advances in high temperature electrolysis using solid oxide fuel cells: A review
Laguna-Bercero, M. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.019 · Cited by 1,156
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Prediction of solid oxide fuel cell cathode activity with first-principles descriptors
Lee, Y.-L., Kleis, J., Rossmeisl, J., Shao-Horn, Y., & Morgan, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02032c · Cited by 659
A review of cathode materials and structures for rechargeable lithium–air batteries
Ma, Z., Yuan, X., Li, L., Ma, Z.-F., Wilkinson, D. P., Zhang, L., & Zhang, J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00838g · Cited by 485
Metadata
- Authors
- Jacobson, A. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-20
- Volume
- 22
- Issue
- 3
- Pages
- 660-674
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2009484349
- Cited by
- 1,366
- References
- 71
- FWCI
- 29.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
