Nanoscale Metal Oxide Particles/Clusters as Chemical Reagents. Unique Surface Chemistry on Magnesium Oxide As Shown by Enhanced Adsorption of Acid Gases (Sulfur Dioxide and Carbon Dioxide) and Pressure Dependence
The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
Surface adsorptive properties of nanoscale MgO particles have been compared with more conventional samples. Morphologically the nanoparticles (autoclave prepared = AP-MgO) are unique and very different from the conventional samples (conventionally prepared = CP-MgO), and AP-MgO possesses more defects, edge and corner sites, higher surface area and more higher index surfaces. The number of residual surface −OH groups/nm 2 is similar for both types of samples. Differences in adsorptivity of SO 2 and CO 2 at relatively low pressure (20 Torr) were determined by gravimetric means. Much larger quantities were adsorbed by AP-MgO. This process of chemisorption was dynamic, and oxygen scrambling occurred when SO 2 and Mg 18 O nanoparticles were in contact. These results, complying with FTIR studies, are rationalized as due to higher intrinsic surface reactivity coupled with higher concentrations of lower coordination ions on the nanoparticle. Pressure studies showed, however, that as 100 Torr of SO 2 or CO 2 was reached, the CP-MgO samples exhibited higher adsorptive capacities. Quantitative determinations of SO 2 (CO 2 ) loading indicate that this difference can be attributed to multilayered physisorption on CP-MgO, which with its flatter, extended planes, can apparently form more ordered multilayered structures and thus physically adsorb more SO 2 (or CO 2 ). In the case of SO 3, large amounts of surface sulfates were detected by FTIR. Overall, our results indicate that nanoparticles of MgO possess a unique surface chemistry and their high surface reactivity coupled with a high surface area allowed them to approach the goal of being stoichiometric chemical reagents.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Infrared Spectra of Adsorbed Species
Pestemer, M. (1967) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.1967.56.3_4.247 · Cited by 964
FT-IR study of the adsorption and transformation of formaldehyde on oxide surfaces
Busca, G., Lamotte, J., Lavalley, J. C., & Lorenzelli, V. (1987) · Journal of the American Chemical Society · doi:10.1021/ja00251a025 · Cited by 638
Structure of Metallic Catalysts
Mason, R. (1976) · Journal of Organometallic Chemistry · doi:10.1016/s0022-328x(00)87276-9 · Cited by 623
Henrich, V. E. (1985) · Reports on Progress in Physics · doi:10.1088/0034-4885/48/11/001 · Cited by 575
Infrared spectroscopy of adsorbed species on the surface of transition metal oxides
Zecchina, A. (1991) · Spectrochimica Acta Part A: Molecular Spectroscopy · doi:10.1016/0584-8539(91)80157-e · Cited by 399
Infrared spectra of surface hydroxyl groups and crystalline structure of oxides
Tsyganenko, A. A., & Filimonov, V. N. (1973) · Journal of Molecular Structure · doi:10.1016/0022-2860(73)85136-1 · Cited by 359
Utamapanya, S., Klabunde, K. J., & Schlup, J. R. (1991) · Chemistry of Materials · doi:10.1021/cm00013a036 · Cited by 344
Self-citationAcidity of surface hydroxyl groups
Hair, M. L., & Hertl, W. (1970) · The Journal of Physical Chemistry · doi:10.1021/j100696a016 · Cited by 289
Adsorption of Na atoms and oxygen-containing molecules on MgO(100) and (111) surfaces
Onishi, H., Egawa, C., Aruga, T., & Iwasawa, Y. (1987) · Surface Science · doi:10.1016/s0039-6028(87)81192-5 · Cited by 260
FTIR spectroscopic study of carbon dioxide adsorption/desorption on magnesia/calcium oxide catalysts
Philipp, R., & Fujimoto, K. (1992) · The Journal of Physical Chemistry · doi:10.1021/j100201a063 · Cited by 238
Research works printed but not linked: 3
- LaFemina J. P., 1994, Crit. Rev. Surf. Chem., 3, 297
- Utampanya S. Ph.D., 1990, Department of Chemistry
- (d) Boehm, H. P.; Knözinger, J. InCatalysis-Science and Technology; Anderson, J. R., Boudart, M., Eds.; Springer: Berlin, 1983; Vol. 4, p 39.
Cited by
BINARY MgO-BASED SOLID SOLUTION CATALYSTS FOR METHANE CONVERSION TO SYNGAS
Hu, Y. H., & Ruckenstein, E. (2002) · Catalysis Reviews · doi:10.1081/cr-120005742 · Cited by 326
Grassian, V. H. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp806073t · Cited by 302
Yang, P., & Lieber, C. M. (1997) · Journal of Materials Research · doi:10.1557/jmr.1997.0393 · Cited by 276
Enhanced Adsorption of Molecules on Surfaces of Nanocrystalline Particles
Zhang, H., Penn, R. L., Hamers, R. J., & Banfield, J. F. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp984574q · Cited by 261
Oxide surfaces as environmental interfaces
Al-Abadleh, H. A., & Grassian, V. H. (2003) · Surface Science Reports · doi:10.1016/j.surfrep.2003.09.001 · Cited by 254
Metadata
- Authors
- Stark, J. V., Park, D. G., Lagadic, I., & Klabunde, K. J.
- Affiliations
- Kansas State University (US)
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 1996-01-01
- Volume
- 8
- Issue
- 8
- Pages
- 1904-1912
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2048094074
- Semantic Scholar
- 01ede0bfb4e7cc740f49555957c538ef4c4600f5
- Cited by
- 210
- References
- 45
- Citations by year
- 2026: 3 · 2025: 2 · 2024: 5 · 2023: 2 · 2022: 7 · 2021: 6 · 2020: 4 · 2019: 7 · 2018: 4 · 2017: 3 · 2016: 6 · 2015: 13 · 2014: 10 · 2013: 10 · 2012: 19
- FWCI
- 3.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- magnesium oxide nanoparticles, nanoclusters, acid gas adsorption, sulfur dioxide, carbon dioxide, surface chemistry, autoclave synthesis, surface defects, chemisorption, pressure dependence, surface sulfate, surface reactivity, surface area
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.