The DOI matches its Crossref record; 22 of the 23 references it cites were found in a registry or an index.
Pyrolysis of Lignins: Experimental and Kinetics Studies
Abstract
Lignins are generally used as a low grade fuel in the pulp and paper industry. In this work, pyrolysis of Alcell and Kraft lignins obtained from the Alcell process and Westvaco, respectively, was carried out in a fixed-bed reactor and in a thermogravimetric analyzer (TGA) using helium (13.4 mL/min/g of lignin) and nitrogen (50 mL/min/g of lignin), respectively. The reaction temperature was increased from 300 to 1073 K, while the heating rates were varied from 5 to 15 K/min. The gaseous products mainly consisted of H 2, CO, CO 2, CH 4, and C 2+ . With increase in heating rate from 5 to 15 K/min both lignin conversion and hydrogen production increased from 56 to 65 wt % and from 25 to 31 mol %, respectively for fixed-bed pyrolysis reaction of Alcell lignin at 1073 K, whereas at the same condition the conversion and hydrogen production increased from 52 to 57 wt % and from 30 to 43 mol % for Kraft lignin. The distributed activation energy model (DAEM) was used to analyze complex reactions involved in the lignin pyrolysis process. In this model, reactions are assumed to consist of a set of irreversible first-order reactions that have different activation energies. This model was used to calculate the activation energy, E, the distribution of activation energy f ( E ), and the frequency factor k 0 for the pyrolysis of Alcell and Kraft lignins in a thermogravimetric analyzer (TGA). For the pyrolysis in TGA, the activation energies for Kraft and Alcell lignins varied from 129 to 361 kJ/mol with maximum distribution at ∼250−270 kJ/mol and from 80 to 158 kJ/mol with maximum distribution at ∼118−125 kJ/mol, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ferdous et al. (2002) also conducted studies of kraft lignin in a fixed bed reactor.”
From Pyrolysis kinetics of washed precipitated lignin (2008) · cites this paper as Ferdous et al. (2002)
In the citing paper
“Research has previously been conducted on the pyrolysis of biomass and its constituents, cellulose, hemicellulose, and different kinds of lignin (including black liquor due to its importance in the pulp and paper industry), e.g. Caballero et al. (1996), Conesa et al. (2001), and Ferdous et al. (2002), mainly using different TGA (ThermoGravimetic Analyzer) equipment.”
From Pyrolysis kinetics of washed precipitated lignin (2008) · cites this paper as Ferdous et al. (2002)
Citations
Cites
Kinetic modeling of biomass pyrolysis
Várhegyi, G., Antal, M. J., Jakab, E., & Szabó, P. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00971-0 · Cited by 545
General model of coal devolatilization
Solomon, P. R., Hamblen, D. G., Carangelo, R. M., Serio, M. A., & Deshpande, G. V. (1988) · Energy & Fuels · doi:10.1021/ef00010a006 · Cited by 514
Thermogravimetric and differential thermal analysis of cellulose, hemicellulose, and lignin
Ramiah, M. V. (1970) · Journal of Applied Polymer Science · doi:10.1002/app.1970.070140518 · Cited by 485
Chemical model of coal devolatilization using percolation lattice statistics
Grant, D. M., Pugmire, R. J., Fletcher, T. H., & Kerstein, A. R. (1989) · Energy & Fuels · doi:10.1021/ef00014a011 · Cited by 470
Kinetic modelling of the pyrolysis of biomass and biomass components
Koufopanos, C. A., Lucchesi, A., & Maschio, G. (1989) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450670111 · Cited by 447
Miura, K. (1995) · Energy & Fuels · doi:10.1021/ef00050a014 · Cited by 369
Pyrolysis kinetics of almond shells and olive stones considering their organic fractions
Caballero, J. A., Conesa, J. A., Font, R., & Marcilla, A. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00015-6 · Cited by 278
Product Composition and Kinetics of Lignite Pyrolysis
Suuberg, E. M., Peters, W. A., & Howard, J. B. (1978) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260065a008 · Cited by 266
Product compositions and kinetics for rapid pyrolysis of cellulose
Hajaligol, M. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1982) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200018a019 · Cited by 207
Model pathways in lignin thermolysis. 1. Phenethyl phenyl ether
Klein, M. T., & Virk, P. S. (1983) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i100009a007 · Cited by 172
Research works printed but not linked: 12
- Dombarg D., 1974, Thermal Analysis, Proceedings Fourth ICTA Budapest, 2, 215
- Chen Y., 1997, The Eastern States Section, 147, 150
- Chan W.-C. R., 1981, J. Appl. Polym. Sci., 26, 1553
- Nunn R. T., 1985, Ind. Eng. Chem. Proc. Des. Dev., 24, 851
- Sada E., 1992, Ind. Eng. Chem. Res., 31, 616, 10.1021/ie00002a025 · DOI
- Pitt G., 1962, J. Fuel, 41, 274
- Iqbal M., 1998, 33rd International Engineering Conference on Energy Conversion
- Ferdous D., 2000, Fuel Process. Technol., 70, 26
- Ferdous D., 2001, Can. J. Chem. Eng., 80, 1023
- Ekstrom C., 1980, Spec. Workshop Fast Pyrolysis Biomass Proc. 303−326
- Avni E., 1985, Fundamental of Thermochemical Biomass Conversion
- Anthony B. D., Proceedings of the 15th Symposium (International) on Combustion; The Combustion Institute: Pittsburgh
Cited by
Items 201–300 of 311
Catalytic gasification of tobacco rob in steam–nitrogen mixture: Kinetic study and fuel gas analysis
Yang, Y., Jin, S., Lin, Y., Huang, S., & Yang, H. (2012) · Energy · doi:10.1016/j.energy.2012.05.051 · Cited by 14
Kinetics of cellulose pyrolysis after a pressurized heat treatment
Wu, M., Várhegyi, G., & Zha, Q. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.06.024 · Cited by 14
“Their model was employed in studying coals [22-24], biomass [11,17] and other materials [25].”
MethodInfluentialSarve, D. T., Dutta, R., Rastogi, A., & Ekhe, J. D. (2022) · Journal of the Indian Chemical Society · doi:10.1016/j.jics.2022.100398 · Cited by 14
Wakimoto, S., Matsukawa, Y., Numazawa, Y., Matsushita, Y., & Aoki, H. (2023) · Fuel · doi:10.1016/j.fuel.2023.127836 · Cited by 13
Study on a novel Si3N4-based composite with the incorporation of N-GQDs produced from nano-lignin
Chen, W., Xu, E., Liu, X., et al. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.03.052 · Cited by 13
Thermal Behavior and Pyrolytic Characteristics of FreshwaterScenedesmussp. Biomass
Kumar, R. R., Ramesh, D., Mutanda, T., Rawat, I., & Bux, F. (2015) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2011.605428 · Cited by 13
“Increasing the heating rate also led to an increase in the maximum rate of dα/dt of the TG curve (Ferdous et al., 2002; Hu et al., 2007).”
BackgroundDevelopments in Flame-Retardant Bio-composite Material Production
Anannya, F. R., & Mahmud, M. A. (2019) · Advances in Civil Engineering Materials · doi:10.1520/acem20180025 · Cited by 13
Chua, Y. W., Wu, H., & Yu, Y. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b02813 · Cited by 12
Lignocellulosics as a Renewable Feedstock for Chemical Industry: Chemicals from Lignin
Fellows, C. M., Brown, T. C., & Doherty, W. O. S. (2011) · Wiley eBooks · doi:10.1002/9781118287705.ch18 · Cited by 17
Wei, Z., Yang, Z., Chen, Z., et al. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-022-11857-9 · Cited by 12
Isolation, Study and Application of Organosolv Lignins (Review)
Кузнецов, Б. Н., Malyar, Y. N., Kuznetsova, S. A., Grishechko, L. I., Kazachenko, A. S., Levdansky, A. V., Pestunov, A. V., Celzard, A., & Institut Jean Lamour, U. C. –. U. ́. D. L. (2016) · Journal of Siberian Federal University Chemistry · doi:10.17516/1998-2836-2016-9-4-454-482 · Cited by 12
Ray, D., & Sain, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100793-8.00001-6 · Cited by 15
Effect of Chemical Structure on Pyrolysis Behavior of Alcell Mild Acidolysis Lignin
Liu, C., Liang, J., Wu, S., & Deng, Y. (2014) · BioResources · doi:10.15376/biores.10.1.1073-1084 · Cited by 11
“The laws are coincident with a previous study on lignin types in poplar (Franke et al. 2000).”
ResultXu, M., Khachatryan, L., Kibet, J. K., & Lomnicki, S. M. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.07.012 · Cited by 11
Thermal degradation kinetics of a lignin particle-reinforced phenolic foam
Domínguez, J. C., Saz‐Orozco, B. D., Oliet, M., Alonso, M. V., & Rodríguez, F. (2020) · Journal of Cellular Plastics · doi:10.1177/0021955x20932889 · Cited by 11
Fire reaction of sandwich panels with corrugated and honeycomb cores made from natural materials
Chanda, A., Kim, N. K., Wijaya, W., et al. (2021) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636221989234 · Cited by 11
“The final major constituent of plywood is the lignin matrix and has a wide decomposition temperature range between 160 C and 400 C [22].”
BackgroundAtaei, S., Yahya, R. B., Gan, S. N., et al. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0403-4 · Cited by 11
Mian, I., Rehman, N., Li, X., et al. (2024) · Energies · doi:10.3390/en17184605 · Cited by 10
“Devolatilization is a complicated procedure; several investigators [18] have approached the pyrolysis process as a single-rate reaction.”
Dhaundiyal, A., & Singh, S. B. (2017) · Acta Technologica Agriculturae · doi:10.1515/ata-2017-0005 · Cited by 10
“The most accurate and well defined approach for the modelling of biomass pyrolysis is to use the distributed activation energy model (DAEM) (Burnham and Braun, 1999; Burnham et al., 1995; Galgano and Biase, 2003; Ferdous et al., 2002).”
MethodDevelopment of technology for production and application of graphite from hydrolytic lignin
Popova, O. V., Serbinovskiy, M. Y., & Геннадьевна, А. А. (2015) · European Journal of Wood and Wood Products · doi:10.1007/s00107-015-0881-5 · Cited by 11
“The thermal reactions of lignin destruction can be completed at higher or lower temperatures, which are considerably determined by the lignin heating rate and gas medium (Bilbao et al. 1990; Caballero et al. 1996; Ferdous et al. 2002; Várhegyi et al. 1997).”
BackgroundInvestigation of Biomass Combustion in Grate Furnaces using CFD
Duffy, N. T. M. (2012) · Arrow@dit (Dublin Institute of Technology) · doi:10.13025/17298 · Cited by 10
Anter, N., Chennani, A., Guida, M. Y., et al. (2025) · RSC Advances · doi:10.1039/d5ra04233j · Cited by 9
Yang, S. I., Wu, M. S., & Hsu, T. C. (2017) · Energy · doi:10.1016/j.energy.2017.03.084 · Cited by 9
Xiang, D., Shen, F., Jiang, X., An, H., Zheng, H., & Gao, Q. (2021) · ACS Omega · doi:10.1021/acsomega.0c05052 · Cited by 9
Estudio de cinética en procesos termogravimétricos de materiales lignocelulósicos
Flores, J. J. A., & Rutiaga-Quiñones, J. G. (2018) · Maderas Ciencia y tecnología · doi:10.4067/s0718-221x2018005002601 · Cited by 11
Synthesizing PET and food waste into refuse plastic fuel (RPF): optimization and kinetic modeling
Qureshi, U., Imtiaz, B., & Jamal, Y. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08934-x · Cited by 9
Thermal properties and size distribution of lignins precipitated with sulphuric acid
Jablonský, M., Ház, A., Dubinyová, L., et al. (2015) · Cited by 9
Ab initio study of hydrogen abstraction reactions on toluene and tetralin
Beste, A., Buchanan, A. C., Britt, P. F., Hathorn, B. C., & Harrison, R. J. (2007) · Journal of Molecular Structure THEOCHEM · doi:10.1016/j.theochem.2007.11.015 · Cited by 9
Pyrolysis kinetics of washed precipitated lignin
Gustafsson, C., & Richards, T. (2008) · BioResources · doi:10.15376/biores.4.1.26-37 · Cited by 8
“From this, the activation energy (Ea) was determined to be 32.1 kJ/mol, which is in accordance with earlier research (e.g. Lopez Pasquali and Herrera 1997; Shuangning et al. 2005).”
MethodInfluentialWang, X., Hu, Z., Mian, I., Dacres, O. D., Li, J., Wei, B., Zhong, M., Li, X., Rahman, N., Luo, G., et al. (2022) · Energies · doi:10.3390/en15249575 · Cited by 8
Pantawane, S. R., Chaurasia, A., & Ekhe, J. D. (2025) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2025.107121 · Cited by 8
Valorization of Lignin and Its Derived Molecules by Electrocatalytic Oxidation
Kaur, P., Wang, J., Li, X., et al. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c02675 · Cited by 8
Pyrolytic conversion of perennial grasses and woody shrubs to energy and chemicals
Arias, E. R., Bertero, M., Jozami, E., Feldman, S. R., Falco, M., & Sedran, U. A. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1911-4 · Cited by 8
Dhaundiyal, A., & Singhb, S. B. (2016) · Archivum Combustionis · Cited by 8
Lago, V., Briens, C. L., & Berruti, F. (2017) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22932 · Cited by 10
Valorization potential of technical lignins from Norway spruce (Picea abies) via pyrolysis
Ghalibaf, M., Alén, R., Hita, I., Deuss, P. J., Jan Heeres, H., & de Wild, P. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105549 · Cited by 7
The generalisation of a multi-reaction model for polynomial ramping of temperature
Dhaundiyal, A., & Singh, S. B. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09650-7 · Cited by 7
Asymptotic Approximations to the Isothermal Pyrolysis of Deodara Leaves using Gamma Distribution
Dhaundiyal, A., & Singh, S. B. (2017) · Universitas Scientiarum · doi:10.11144/javeriana.sc22-3.aatt · Cited by 7
“The most authentic and accurate model considered in this study is the Distributed Activation energy model (DAEM) [7-10].”
MethodStudy on biopretreatment of lignin by white-rot fungi for enhancing pyrolysis in inert atmosphere
Yang, X., Zhang, X., & Chen, S. (2011) · Wood Science and Technology · doi:10.1007/s00226-011-0420-4 · Cited by 7
Challenges in the Computation of Rate Constants for Lignin Model Compounds
Beste, A., & Buchanan, A. C. (2011) · Wiley eBooks · doi:10.1002/9781118166123.ch7 · Cited by 7
Abaei, S., Derogar, E., & Tavakoli, O. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c03390 · Cited by 6
Bhattacharyya, M., Shadangi, K. P., Purkayastha, R., Mahanta, P., & Mohanty, K. (2023) · Renewable Energy · doi:10.1016/j.renene.2023.119658 · Cited by 8
Aniśko, J., Kosmela, P., & Barczewski, M. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.120181 · Cited by 6
Lignin activation with selected ionic liquids based on kinetic and thermodynamic analyses
Kurc, B., Gross, X., Pigłowska, M., Kołodziejczak‐Radzimska, A., & Kłapiszewski, Ł. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141144 · Cited by 6
Reddy, I. A. K., & Ghatak, H. R. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6912-1 · Cited by 7
“Thermal degradation of Alcell (lignocellulosic biomass treated with aqueous ethanol at elevated temperature) and Kraft lignins at temperatures up to 800 C is reported to produce gas mixture containing H2, CO, CO2, and CH4 and char residue [13, 14].”
BackgroundPotential of petrochemicals from lignin
Kumar, A., Biswas, B., Krishna, B. B., & Bhaskar, T. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820294-4.00007-7 · Cited by 7
Production of Chemicals by Microwave Thermal Treatment of Lignin
Farag, S. (2013) · PolyPublie (École Polytechnique de Montréal) · Cited by 6
Melati, A., Settar, A., Chetehouna, K., et al. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54430 · Cited by 5
Assoumani, N., Marouani, M. E., Hamdaoui, L. E., Trif, L., & Kifani‐Sahban, F. (2023) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2023.57.69 · Cited by 6
Bonelli, P. R., & Cukierman, A. L. (2015) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2011.627414 · Cited by 5
“Pyrolysis of lignin is complex, since it depends on lignin composition and process conditions (Brodin et al., 2010; Yang et al., 2007; Ferdous et al., 2002).”
BackgroundBoriouchkine, A., Sharifi, V. N., Swithenbank, J., et al. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.07.055 · Cited by 4
“This 312 combination resulted in a gas formation trend from tar 4 cracking comparable with gas formation from Kraft 313 lignin pyrolysis studied by Ferdous et al. (2001). 314 Table 9.”
Yang, Y., Chen, X., Wang, D., Cheng, G., & Lv, D. (2019) · International Journal of Green Energy · doi:10.1080/15435075.2019.1572608 · Cited by 4
“…and lignin, it was known that the hemicellulose started to decompose at around 225–325°C and the cellulose was found to decompose between 325°C and 375°C. Lignin had a broad decomposition temperature range at temperatures higher than 250–500°C (Di and Lanzetta 1997; Ferdous et al. 2002).”
BackgroundInfluentialKandiyoti, R., Herod, A. A., Bartle, K. D., & Morgan, T. J. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100784-6.00003-5 · Cited by 4
The conversion of lignin to alkylphenolic monomers using heterogeneous catalysis
McVeigh, A. (2016) · Enlighten: Theses (The University of Glasgow) · Cited by 4
Yin, B., Li, H., Li, Z., Yang, X., Lv, G., Zheng, A., Chen, Z., Ren, Y., Li, S., & Ma, W. (2025) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2025.107499 · Cited by 3
Meena, N., Saha, D., & Kundu, P. P. (2026) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2026.104511 · Cited by 9
Sonkawade, A. R., Shelake, A. R., Patil, A. D., et al. (2026) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2026.109020 · Cited by 3
Clayton Copula as an Alternative Perspective of Multi-Reaction Model
Dhaundiyal, A., Singh, S. B., Hanon, M. M., et al. (2018) · Environmental and Climate Technologies · doi:10.2478/rtuect-2018-0006 · Cited by 3
Capitalizing on lignin and tannin value
Hagiopol, C. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822205-8.00005-0 · Cited by 3
Characterization of Hemp Hurd-Derived Biochar for Potential Agricultural Applications
Assirelli, A., Fischetti, E., Scarfone, A., Santangelo, E., Carnevale, M., Paris, E., Palma, A., & Gallucci, F. (2025) · Agronomy · doi:10.3390/agronomy15092136 · Cited by 8
Dhaundiyal, A., & Singh, S. B. (2017) · Acta Mechanica et Automatica · doi:10.1515/ama-2017-0045 · Cited by 3
“Equations (11), (12), (13), and (14) are solved by using algorithm on the Matlab software.”
BackgroundMethodInfluentialCharacterization Techniques and Quality Assessment of Lignin and Lignin Carbon Materials
Adeosun, S. O., & Gbenebor, O. P. (2019) · Springer eBooks · doi:10.1007/978-3-030-18792-7_5 · Cited by 8
Hofbauer, H., Kaltschmitt, M., Keil, F. J., Meier, D., & Welling, J. (2016) · Springer eBooks · doi:10.1007/978-3-662-47438-9_14 · Cited by 4
Structure and Properties of Lignin‐Based Biopolymers in Polymer Production
Motsoeneng, T. S., Mochane, M. J., Mokhena, T. C., et al. (2019) · doi:10.1002/9781119592129.ch21 · Cited by 3
Applications of lumping kinetics methodology to complex reactive mixtures
Amhammed, M. A. (2013) · Cited by 3
Chen, W., Zhou, A., Tian, Y., et al. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.03.341 · Cited by 2
On the Exploitation of Lignin Slow Pyrolysis Products
Busca, G., Spennati, E., Borella, M., Casazza, A. A., & Garbarino, G. (2025) · Energies · doi:10.3390/en18040943 · Cited by 3
Kumar, M., & Sharma, H. (2025) · Reaction Kinetics Mechanisms and Catalysis · doi:10.1007/s11144-025-02860-w · Cited by 2
Thanapal, S. S., Eseltine, D., Annamalai, K., & Ranjan, D. (2014) · Springer eBooks · doi:10.1007/978-81-322-2211-8_4 · Cited by 2
Selection Chart of Flame Retardants for Natural Fiber Polymer Composites
Elsabbagh, A., Ramzy, A., Attia, T., et al. (2017) · Springer eBooks · doi:10.1007/978-3-319-64641-1_12 · Cited by 2
Arrieta, A. R. A., Ortiz, E., Ariza, I. P., Cardozo, J. O., & Morales, J. M. (2017) · Prospectiva · doi:10.15665/rp.v16i1.1397 · Cited by 1
“Los resultados de los parámetros cinéticos obtenidos con este modelo para la lignina sin catalizador a las diferentes velocidades de calentamiento (ver tabla 3) muestran energías de activación que se encuentran dentro de los rangos reportados por la literatura (35 - 361 kJ/ mol) [32, 33].”
BackgroundOpportunities to Enhance the Pyrolysis of Biomass in The Production of Hydroxyapatite and Chemicals
Proano‐Aviles, J. (2020) · American Journal of Biomedical Science & Research · doi:10.34297/ajbsr.2020.08.001315 · Cited by 2
“Thermogravimetric analyzer (TGA) is a powerful tool to perform controlled pyrolysis of milligram-scale samples, with insight on mass loss time evolution; however, this instrument has low heating rates close to 3 °C/s (120 °C/min) [59,60].”
BackgroundStudies on Rapid Pyrolysis Characteristics of Huainan Coal
Shi, Z. J., Fang, M. X., Wang, Q. H., et al. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.316-317.32 · Cited by 2
Fire Performance of Natural Fiber Reinforced Polymeric Composites
Zindani, D., Kumar, K., & Davim, J. P. (2019) · doi:10.1002/9783527820979.ch11 · Cited by 2
Tran, Q. K., Ly, H. V., Hwang, H. T., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4097548 · Cited by 2
Kermani, A., Hosseinifard, F., Salimi, M., & Amidpour, M. (2025) · Biotechnology Reports · doi:10.1016/j.btre.2025.e00928 · Cited by 1
Influence of sorghum grain tannin content on the composition and properties of pyrolysis products
Mendes, P. B., da Silva, J. T., Carolino, J. M., et al. (2025) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2025.108642 · Cited by 1
Ma, Q., Jian, F., Cai, C., Chang, M., Chen, X., Zhang, X., Mao, H., & Jia, Z. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.122934 · Cited by 1
Anshu, Das, S., Aggrawal, R., Yadav, V., Anupam, K., & Dutta, S. (2026) · Applied Energy · doi:10.1016/j.apenergy.2026.127746 · Cited by 2
Kamaraj, Y., Ali, S., Sethupathy, S., Dar, M. A., Gao, L., Rani, A., Kumaresan, V., Ahmad, N., & Zhu, D. (2026) · Biomolecules · doi:10.3390/biom16070979 · Cited by 3
“The process typically initiates with the cleavage of weaker β -O-4 bonds, followed by breakdown of stronger linkages at temperatures exceeding 450 ◦ C [57].”
Pyrolytic valorization of an invasive crop (Phragmites) to high-value biofuels and bioproducts
Barbiero, C., Nanda, S., & Berruti, F. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85586-0.00008-1 · Cited by 1
Thermo chemical conversion of cedar wood by pyrolysis technology for bio-oil
Islam, M. R., Parveen, M., Rahman, M. S., Ferdous, J., Kader, M. A., & TAKAI, K. (2023) · Biofuels · doi:10.1080/17597269.2023.2206698 · Cited by 2
“It is the fourth largest energy source in the world, supplying about 14% of primary energy [6].”
BackgroundLiu, C., Xie, Z., Tong, L., Fan, Y., Kong, X., & Xiao, R. (2023) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.2538 · Cited by 1
“24,37,40,41 From the absence of H 2 it can be concluded that H 2 is involved in the pyrolysis reactions, which contributes to lignin degradation, promotes bio-oil formation and is consistent with the results in Fig.”
ResultMiura, K. (2024) · ACS Omega · doi:10.1021/acsomega.4c05744 · Cited by 1
Suparanon, T., Phusunti, N., & Phetwarotai, W. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136988 · Cited by 1
Isoconversional analysis for the prediction of mass-loss rates during pyrolysis of biomass
Samuelsson, L. N. (2016) · Cited by 1
CHAPTER 8: PYROLYSIS OF BIOMASS TO BIO-OILS
Ben, H. (2014) · Materials and Energy/Materials and energy · doi:10.1142/9789814513289_0008 · Cited by 2
Conversion of Organic Waste to Value-added Products
Akbari, M. (2019) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r3-pn5q-ht21 · Cited by 1
The Impact of Computational Methods on Transition Metal-containing Species
Wang, J. (2015) · University of North Texas Digital Library (University of North Texas) · doi:10.12794/metadc822795
Pyrolysis Characteristics of Basic Components
Zhou, H. (2017) · Springer theses · doi:10.1007/978-981-10-3827-3_3
Study of Organosolv Lignins Using Gel Permeation Chromatography and Thermal Analysis
Malyar, Y. N., Sharypov Victor, I., Kazachenko, А. S., & Levdansky, A. V. (2019) · Journal of Siberian Federal University Chemistry · doi:10.17516/1998-2836-0109 · Cited by 3
“Энергии активации для органосольвентных и крафт-лигнинов составили 129-361 и 80-158 кДж / моль с предэкспоненциальным множителем 6,2 × 1011-9,3 × 1022 и 3,3 × 107- 1,8 × 109 при скорости нагревания 5-15 °C до конечной температуры 800 °C [52].”
Catalytic effect of ferric sulfate and zinc sulfate on lignin pyrolysis
Arrieta, A. R. A., Ortiz, E., Ariza, I. P., Cardozo, J. O., & Morales, J. M. (2022) · Applied Chemical Engineering · doi:10.24294/ace.v5i1.1449
“The results of the kinetic parameters obtained with this model for lignin without catalyst at the different heating rates (see Table 3) show activation energies that are within the ranges reported by the literature (35–361 kJ/mol)([32,33]).”
BackgroundSolvolytic Deconstruction of Lignin and Upgrading to Renewable Chemicals
Sahayaraj, D. V. (2022) · doi:10.31274/td-20240329-682
Granados-Fitch, M. G., Melgoza, J. M. Q., Juarez-Arellano, E. A., & Avalos‐Borja, M. (2025) · Chemistry · doi:10.3390/chemistry7020033
Production of Biochar from Plant Biomass and Their Applications
de Silva, J., Senanayake, E. R. M. K., Waduge, M., Liyanage, D. M., & Thiripuranathar, G. (2025) · Springer eBooks · doi:10.1007/978-3-031-92594-8_6
Optimizing lignin oxidative depolymerization in single-phase binary solvent systems
Meng, F., Wang, S., Jia, S., Li, X., Shi, J., & Xu, W. (2025) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2025.107253 · Cited by 1
Metadata
- Authors
- Ferdous, D., Dalai, A. K., Bej, S. K., & Thring, R. W.
- Affiliations
- University of Saskatchewan (CA)
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-09-12
- Volume
- 16
- Issue
- 6
- Pages
- 1405-1412
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2000330305
- Semantic Scholar
- 92680dd9641a17c3e65c8f98706052b5a5efd2c9
- Cited by
- 310
- References
- 23
- Citations by year
- 2026: 12 · 2025: 19 · 2024: 11 · 2023: 11 · 2022: 14 · 2021: 19 · 2020: 13 · 2019: 26 · 2018: 18 · 2017: 24 · 2016: 13 · 2015: 20 · 2014: 16 · 2013: 17 · 2012: 12
- FWCI
- 3.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
- Keywords
- lignin pyrolysis, Alcell lignin, kraft lignin, pyrolysis kinetics, distributed activation energy model, hydrogen production, fixed-bed reactor, activation energy distribution, heating rate effects, gaseous products, lignin conversion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.