Pyrolysis of Lignins: Experimental and Kinetics Studies
The DOI matches its Crossref record; 22 of the 23 references it cites were found in a registry or an index.
Abstract
Lignins are generally used as a low grade fuel in the pulp and paper industry. In this work, pyrolysis of Alcell and Kraft lignins obtained from the Alcell process and Westvaco, respectively, was carried out in a fixed-bed reactor and in a thermogravimetric analyzer (TGA) using helium (13.4 mL/min/g of lignin) and nitrogen (50 mL/min/g of lignin), respectively. The reaction temperature was increased from 300 to 1073 K, while the heating rates were varied from 5 to 15 K/min. The gaseous products mainly consisted of H 2, CO, CO 2, CH 4, and C 2+ . With increase in heating rate from 5 to 15 K/min both lignin conversion and hydrogen production increased from 56 to 65 wt % and from 25 to 31 mol %, respectively for fixed-bed pyrolysis reaction of Alcell lignin at 1073 K, whereas at the same condition the conversion and hydrogen production increased from 52 to 57 wt % and from 30 to 43 mol % for Kraft lignin. The distributed activation energy model (DAEM) was used to analyze complex reactions involved in the lignin pyrolysis process. In this model, reactions are assumed to consist of a set of irreversible first-order reactions that have different activation energies. This model was used to calculate the activation energy, E, the distribution of activation energy f ( E ), and the frequency factor k 0 for the pyrolysis of Alcell and Kraft lignins in a thermogravimetric analyzer (TGA). For the pyrolysis in TGA, the activation energies for Kraft and Alcell lignins varied from 129 to 361 kJ/mol with maximum distribution at ∼250−270 kJ/mol and from 80 to 158 kJ/mol with maximum distribution at ∼118−125 kJ/mol, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ferdous et al. (2002) also conducted studies of kraft lignin in a fixed bed reactor.”
From Pyrolysis kinetics of washed precipitated lignin (2008) · cites this paper as Ferdous et al. (2002)
In the citing paper
“Research has previously been conducted on the pyrolysis of biomass and its constituents, cellulose, hemicellulose, and different kinds of lignin (including black liquor due to its importance in the pulp and paper industry), e.g. Caballero et al. (1996), Conesa et al. (2001), and Ferdous et al. (2002), mainly using different TGA (ThermoGravimetic Analyzer) equipment.”
From Pyrolysis kinetics of washed precipitated lignin (2008) · cites this paper as Ferdous et al. (2002)
Citations
Cites
Kinetic modeling of biomass pyrolysis
Várhegyi, G., Antal, M. J., Jakab, E., & Szabó, P. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00971-0 · Cited by 545
General model of coal devolatilization
Solomon, P. R., Hamblen, D. G., Carangelo, R. M., Serio, M. A., & Deshpande, G. V. (1988) · Energy & Fuels · doi:10.1021/ef00010a006 · Cited by 514
Thermogravimetric and differential thermal analysis of cellulose, hemicellulose, and lignin
Ramiah, M. V. (1970) · Journal of Applied Polymer Science · doi:10.1002/app.1970.070140518 · Cited by 485
Chemical model of coal devolatilization using percolation lattice statistics
Grant, D. M., Pugmire, R. J., Fletcher, T. H., & Kerstein, A. R. (1989) · Energy & Fuels · doi:10.1021/ef00014a011 · Cited by 470
Kinetic modelling of the pyrolysis of biomass and biomass components
Koufopanos, C. A., Lucchesi, A., & Maschio, G. (1989) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450670111 · Cited by 447
Miura, K. (1995) · Energy & Fuels · doi:10.1021/ef00050a014 · Cited by 369
Pyrolysis kinetics of almond shells and olive stones considering their organic fractions
Caballero, J. A., Conesa, J. A., Font, R., & Marcilla, A. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00015-6 · Cited by 278
Product Composition and Kinetics of Lignite Pyrolysis
Suuberg, E. M., Peters, W. A., & Howard, J. B. (1978) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260065a008 · Cited by 266
Product compositions and kinetics for rapid pyrolysis of cellulose
Hajaligol, M. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1982) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200018a019 · Cited by 207
Model pathways in lignin thermolysis. 1. Phenethyl phenyl ether
Klein, M. T., & Virk, P. S. (1983) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i100009a007 · Cited by 172
Research works printed but not linked: 12
- Dombarg D., 1974, Thermal Analysis, Proceedings Fourth ICTA Budapest, 2, 215
- Chen Y., 1997, The Eastern States Section, 147, 150
- Chan W.-C. R., 1981, J. Appl. Polym. Sci., 26, 1553
- Nunn R. T., 1985, Ind. Eng. Chem. Proc. Des. Dev., 24, 851
- Sada E., 1992, Ind. Eng. Chem. Res., 31, 616, 10.1021/ie00002a025 · DOI
- Pitt G., 1962, J. Fuel, 41, 274
- Iqbal M., 1998, 33rd International Engineering Conference on Energy Conversion
- Ferdous D., 2000, Fuel Process. Technol., 70, 26
- Ferdous D., 2001, Can. J. Chem. Eng., 80, 1023
- Ekstrom C., 1980, Spec. Workshop Fast Pyrolysis Biomass Proc. 303−326
- Avni E., 1985, Fundamental of Thermochemical Biomass Conversion
- Anthony B. D., Proceedings of the 15th Symposium (International) on Combustion; The Combustion Institute: Pittsburgh
Cited by
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Lignin Depolymerization and Conversion: A Review of Thermochemical Methods
Pandey, M. P., & Kim, C. S. (2011) · Chemical Engineering & Technology · doi:10.1002/ceat.201000270 · Cited by 1,419
White, J. E., Catallo, W. J., & Legendre, B. L. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.01.004 · Cited by 1,232
Lignin utilization: A review of lignin depolymerization from various aspects
Chio, C., Sain, M., & Qin, W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.008 · Cited by 1,209
“The depolymerized lignin fragments from the beginning stage are further converted to other chemicals at high temperature, including benzene ring cracking and gases release [58].”
Liquid fuels, hydrogen and chemicals from lignin: A critical review
Azadi, P., Inderwildi, O. R., Farnood, R., & King, D. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.022 · Cited by 1,066
Lignin – from natural adsorbent to activated carbon: A review
Suhas, Carrott, P. J. M., & Ribeiro Carrott, M. M. L. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.08.008 · Cited by 1,062
“…2005; Sharma et al., 2004; Rodrı́guez-Mirasol et al., 1993; Hayashi et al., 2000; Baklanova et al., 2003; Cagniant et al., 2003; Várhegyi et al., 1997; Fierro et al., 2005; Kuznetsov and Shchipko, 1995; Jakab et al., 1997; Ferdous et al., 2002) but can be readily removed by sulfuric acid washing.”
BackgroundMechanism study of wood lignin pyrolysis by using TG–FTIR analysis
Liu, Q., Wang, S., Zheng, Y., Luo, Z., & Cen, K. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.03.007 · Cited by 965
Figueiredo, P., Lintinen, K., Hirvonen, J. T., Kostiainen, M. A., & Santos, H. A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.001 · Cited by 956
Hu, X., & Gholizadeh, M. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.01.024 · Cited by 671
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Understanding the Fast Pyrolysis of Lignin
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201100133 · Cited by 468
Biological valorization of low molecular weight lignin
Abdelaziz, O. Y., Brink, D. P., Prothmann, J., Ravi, K., Sun, M., García-Hidalgo, J., Sandahl, M., Hulteberg, C. P., Turner, C., Lidén, G., et al. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.10.001 · Cited by 412
“investigated the pyrolysis of Alcell and Kraft lignins in a fixed bed reactor and in a thermogravimetric analyzer using helium and nitrogen as carrier gas (Ferdous et al., 2002).”
MethodManfredi, L. B., Rodríguez, E. S., Wladyka-Przybylak, M., & Vázquez, A. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.05.003 · Cited by 367
A systematic study of the kinetics of lignin pyrolysis
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2009.10.003 · Cited by 352
Cai, J., Wu, W., & Liu, R. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.04.052 · Cited by 347
“Therefore, the DAEM has been used previously to describe the pyrolysis of biomass components [23,55–60].”
MethodJain, M., Yadav, M., Kohout, T., Lahtinen, M., Garg, V. K., & Sillanpää, M. (2018) · Water Resources and Industry · doi:10.1016/j.wri.2018.10.001 · Cited by 344
Lignin Pyrolysis Components and Upgrading—Technology Review
Mu, W., Ben, H., Ragauskas, A., & Deng, Y. (2013) · BioEnergy Research · doi:10.1007/s12155-013-9314-7 · Cited by 333
The pyrolysis chemistry of a β-O-4 type oligomeric lignin model compound
Chu, S., Subrahmanyam, A. V., & Huber, G. W. (2013) · Green Chem. · doi:10.1039/c2gc36332a · Cited by 331
Sınaǧ, A., Kruse, A., & Rathert, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030475+ · Cited by 327
Flammability and fire resistance of composites reinforced by natural fibers
Kozłowski, R., & Władyka‐Przybylak, M. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1135 · Cited by 323
Flammability of Natural Fiber-reinforced Composites and Strategies for Fire Retardancy: A Review
Chapple, S., & Anandjiwala, R. (2010) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705709356338 · Cited by 303
“At the lower temperatures, relatively weak bonds break, whereas at higher temperatures, cleavage of bonds in the aromatic rings of the lignin takes place [37].”
BackgroundLignin-based carbon fibers: Oxidative thermostabilization of kraft lignin
Braun, J. L., Holtman, K. M., & Kadla, J. F. (2005) · Carbon · doi:10.1016/j.carbon.2004.09.027 · Cited by 295
Kinetic analyses of biomass pyrolysis using the distributed activation energy model
SONOBE, T., & WORASUWANNARAK, N. (2008) · Fuel · doi:10.1016/j.fuel.2007.05.004 · Cited by 294
Leng, E., Guo, Y., Chen, J., Liu, S., E, J., & Xue, Y. (2022) · Fuel · doi:10.1016/j.fuel.2021.122102 · Cited by 286
TG study on pyrolysis of biomass and its three components under syngas☆
WANG, G., LI, W., LI, B., & CHEN, H. (2008) · Fuel · doi:10.1016/j.fuel.2007.02.032 · Cited by 285
A distributed activation energy model for the pyrolysis of lignocellulosic biomass
Cai, J., Wu, W., Liu, R., & Huber, G. W. (2013) · Green Chemistry · doi:10.1039/c3gc36958g · Cited by 282
Interactions of biomass components during pyrolysis: A TG-FTIR study
Liu, Q., Zhong, Z., Wang, S., & Luo, Z. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.12.009 · Cited by 269
Fractionation and characterization of industrial lignins
Li, H., & McDonald, A. G. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.08.013 · Cited by 266
Recent advances of greener pretreatment technologies of lignocellulose
Roy, R., Rahman, M. S., & Raynie, D. E. (2020) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2020.100035 · Cited by 263
Depolymerization and Hydrodeoxygenation of Switchgrass Lignin with Formic Acid
Xu, W., Miller, S. J., Agrawal, P. K., & Jones, C. W. (2012) · ChemSusChem · doi:10.1002/cssc.201100695 · Cited by 261
Recent Development in Chemical Depolymerization of Lignin: A Review
Wang, H., Tucker, M., & Ji, Y. (2013) · Journal of Applied Chemistry · doi:10.1155/2013/838645 · Cited by 260
Gordobil, O., Moriana, R., Zhang, L., Labidi, J., & Sevastyanova, O. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.12.048 · Cited by 258
Ma, Z., Sun, Q., Ye, J., Yao, Q., & Zhao, C. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.12.007 · Cited by 248
Study on carbonization of lignin by TG-FTIR and high-temperature carbonization reactor
Cao, J., Xiao, G., Xu, X., Shen, D., & Jin, B. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.06.016 · Cited by 230
Mian, I., Li, X., Jian, Y., Dacres, O. D., Zhong, M., Liu, J., Ma, F., & Rahman, N. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.122099 · Cited by 231
NMR Characterization of Pyrolysis Oils from Kraft Lignin
Ben, H., & Ragauskas, A. J. (2011) · Energy & Fuels · doi:10.1021/ef2001162 · Cited by 229
Lin, Y., Zhang, C., Zhang, M., & Zhang, J. (2010) · Energy & Fuels · doi:10.1021/ef1009605 · Cited by 218
A review of flammability of natural fibre reinforced polymeric composites
Kim, N. K., Dutta, S., & Bhattacharyya, D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.04.016 · Cited by 208
Wang, S., Lin, H., Ru, B., Sun, W., Wang, Y., & Luo, Z. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.014 · Cited by 207
Thermogravimetry as a tool to classify waste components to be used for energy generation
Heikkinen, J. M., Hordijk, J. C., de Jong, W., & Spliethoff, H. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.12.001 · Cited by 204
Pyrolysis of Coals and Biomass: Analysis of Thermal Breakdown and Its Products
Morgan, T. J., & Kandiyoti, R. (2014) · Chemical Reviews · doi:10.1021/cr400194p · Cited by 204
Thermal stability and pyrolysis kinetics of organosolv lignins obtained from Eucalyptus globulus
Domínguez, J. C., Oliet, M., Alonso, M. V., Gilarranz, M. A., & Rodríguez, F. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.07.006 · Cited by 182
Gayubo, A. G., Valle, B., Aguayo, A. T., Olazar, M., & Bilbao, J. (2010) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2289 · Cited by 176
Minu, K., Jiby, K. K., & Kishore, V. V. N. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.01.007 · Cited by 174
Li, J., Yan, R., Xiao, B., Liang, D. T., & Lee, D. H. (2008) · Energy & Fuels · doi:10.1021/ef700283j · Cited by 174
Yuanyuan, Z., Yanxia, G., Fangqin, C., Kezhou, Y., & Yan, C. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.06.018 · Cited by 169
Hydrogen synthesis from biomass pyrolysis with in situ carbon dioxide capture using calcium oxide
Widyawati, M., Church, T. L., Florin, N. H., & Harris, A. T. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.11.103 · Cited by 163
Du, S., Valla, J. A., & Bollas, G. M. (2013) · Green Chemistry · doi:10.1039/c3gc41581c · Cited by 156
Karagöz, S., Bhaskar, T., Muto, A., Sakata, Y., & Uddin, M. A. (2004) · Energy & Fuels · doi:10.1021/ef030133g · Cited by 158
Thermogravimetric analysis and kinetic study on large particles of printed circuit board wastes
Quan, C., Li, A., & Gao, N. (2009) · Waste Management · doi:10.1016/j.wasman.2009.03.020 · Cited by 157
“The DAEM have also widely applied to study the pyrolysis of biomass (Ferdous et al., 2002; Sonobe and Worasuwannarak, 2008; Wang et al., 2008).”
MethodResultThermal degradation mechanisms of wood under inert and oxidative environments using DAEM methods
Shen, D., Gu, S., Jin, B., & Fang, M. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.09.081 · Cited by 136
Application of biomass fast pyrolysis part I: Pyrolysis characteristics and products
Yang, S. I., Wu, M. S., & Wu, C. (2014) · Energy · doi:10.1016/j.energy.2013.12.063 · Cited by 148
Nonisothermal Catalytic Liquefaction of Corn Stalk in Subcritical and Supercritical Water
Song, C., Hu, H., Zhu, S., Wang, G., & Chen, G. (2004) · Energy & Fuels · doi:10.1021/ef0300141 · Cited by 134
Cho, J., Chu, S., Dauenhauer, P. J., & Huber, G. W. (2012) · Green Chem. · doi:10.1039/c1gc16222e · Cited by 130
Campanella, A., & Harold, M. P. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.08.023 · Cited by 130
Beis, S. H., Mukkamala, S., Hill, N., Joseph, J., Baker, C., Jensen, B., Stemmler, E. A., Wheeler, C., Frederick, B. G., van Heiningen, A., et al. (2010) · BioResources · doi:10.15376/biores.5.3.1408-1424 · Cited by 125
“…LignoboostTM lignins were essentially identical (193 kJ/mol) and were within the range determined for lignins reported in the literature (Caballero et al. 1996a; Caballero et al. 1996b; Cordero et al. 1990; Ferdous et al. 2002; Liu et al. 2008; Nunn et al. 1985; Stamm 1956; Suuberg et al. 1978).”
MethodResultElectrochemical upgrading of depolymerized lignin: a review of model compound studies
Garedew, M., Lam, J. C., Petitjean, L., Huang, S., Song, B., Lin, F., Jackson, J. E., Saffron, C. M., & Anastas, P. T. (2021) · Green Chemistry · doi:10.1039/d0gc04127k · Cited by 140
Ma, Z., Wang, J., Zhou, H., Zhang, Y., Yang, Y., Liu, X., Ye, J., Chen, D., & Wang, S. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.09.020 · Cited by 121
Hu, J., Xiao, R., Shen, D., & Zhang, H. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.148 · Cited by 117
“These values are close to those from some previous studies (Chan and Krieger, 1981; Ferdous et al., 2002; Varhegyi et al., 1997).”
BackgroundResultInfluentialSolar Gasification of Biomass: A Molten Salt Pyrolysis Study
Adinberg, R., Epstein, M., & Karni, J. (2004) · Journal of Solar Energy Engineering · doi:10.1115/1.1753577 · Cited by 117
Fushimi, C., Araki, K., Yamaguchi, Y., & Tsutsumi, A. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0300575 · Cited by 125
Huang, X., Yin, H., Zhang, H., Mei, N., & Mu, L. (2022) · Energy · doi:10.1016/j.energy.2022.125062 · Cited by 118
Lignin as a renewable aromatic resource for the chemical industry
Gosselink, R. J. A. (2011) · doi:10.18174/186285 · Cited by 177
Transforming lignin into renewable fuels, chemicals, and materials: A review
Patel, R., Dhar, P., Babaei‐Ghazvini, A., Dafchahi, M. N., & Acharya, B. (2023) · Bioresource Technology Reports · doi:10.1016/j.biteb.2023.101463 · Cited by 145
A novel Gaussian-DAEM-reaction model for the pyrolysis of cellulose, hemicellulose and lignin
Zhang, J., Chen, T., Wu, J., & Wu, J. (2014) · RSC Advances · doi:10.1039/c4ra01445f · Cited by 115
A detailed non-isothermal kinetic study of elephant grass pyrolysis from different models
Collazzo, G. C., Broetto, C. C., Perondi, D., Junges, J., Dettmer, A., Filho, A. A. D., Foletto, E. L., & Godinho, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.012 · Cited by 114
A novel mesoporous lignin/silica hybrid from rice husk produced by a sol–gel method
Qu, Y., Tian, Y., Zou, B., Zhang, J., Zheng, Y., Wang, L., Li, Y., Rong, C., & Wang, Z. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.067 · Cited by 113
Pyrolysis and catalytic pyrolysis of industrial lignins by TG-FTIR: Kinetics and products
Li, B., Lv, W., Zhang, Q., Wang, T., & Ma, L. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.04.002 · Cited by 106
Thermochemical characterisation of straws and high yielding perennial grasses
Greenhalf, C., Nowakowski, D. J., Bridgwater, A. V., Titiloye, J. O., Yates, N. E., Riche, A. B., & Shield, I. F. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.10.025 · Cited by 112
Sarvaramini, A., Assima, G. P., & Larachi, F. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.056 · Cited by 115
Mani, T., Murugan, P., & Mahinpey, N. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8013605 · Cited by 99
Dev, B., Rahman, M. A., Repon, M. R., Rahman, M. M., Hajı, A., & Nawab, Y. (2023) · Polymer Composites · doi:10.1002/pc.27633 · Cited by 110
Chen, R., Zhang, J., Lun, L., Li, Q., & Zhang, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121970 · Cited by 94
Combustion kinetics and mechanism of biomass pellet
Mian, I., Li, X., Dacres, O. D., et al. (2020) · Energy · doi:10.1016/j.energy.2020.117909 · Cited by 95
Biofuels from Microalgae Biomass: A Review of Conversion Processes and Procedures
Ebhodaghe, S. O., Imanah, O. E., & Ndibe, H. (2022) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2021.103591 · Cited by 93
Comparison for the compositions of fast and slow pyrolysis oils by NMR characterization
Ben, H., & Ragauskas, A. J. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.07.151 · Cited by 110
Lignin depolymerization and biotransformation to industrially important chemicals/biofuels
Radhika, N. L., Sachdeva, S., & Kumar, M. (2022) · Fuel · doi:10.1016/j.fuel.2021.122935 · Cited by 88
Bianasari, A. A., Khaled, M. S., Hoang, T., Reza, M. S., Bakar, M. S. A., & Азад, А. К. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118437 · Cited by 101
Onsree, T., Tippayawong, N., Zheng, A., & Li, H. (2018) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2018.07.011 · Cited by 94
Production of hydrogen by lignins fast pyrolysis
Baumlin, S., Broust, F., Bazer-Bachi, F., BOURDEAUX, T., Olivier Herbinet, B., TOUTIENDIAYE, F., FERRER, M., & Lédé, J. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.02.016 · Cited by 91
Tian, H., Jiao, H., Cai, J., Wang, J., Yang, Y., & Bridgwater, A. V. (2019) · Fuel · doi:10.1016/j.fuel.2019.116603 · Cited by 88
“hemicellulose (in the temperature range of 225-325 °C and then cellulose at 325-375 °C [27, 28].”
BackgroundUnderstanding the dependence of biochar properties on different types of biomass
Gholizadeh, M., Meca, S., Zhang, S., Clarens, F., & Hu, X. (2024) · Waste Management · doi:10.1016/j.wasman.2024.04.011 · Cited by 97
Interactions of municipal solid waste components during pyrolysis: A TG-FTIR study
Zhou, H., Meng, A., Long, Y., Li, Q., & Zhang, Y. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.024 · Cited by 78
Ojha, D. K., Viju, D., & Vinu, R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.084 · Cited by 81
Zhou, H., Wu, C., Onwudili, J. A., Meng, A., Zhang, Y., & Williams, P. T. (2015) · RSC Advances · doi:10.1039/c4ra10639c · Cited by 81
Kinetic Study on Bamboo Pyrolysis
Mui, E. L. K., Cheung, W. H., Lee, V. K. C., & McKay, G. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070763w · Cited by 90
Non-isothermal pyrolysis characteristics of giant sensitive plants using thermogravimetric analysis
Wongsiriamnuay, T., & Tippayawong, N. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.037 · Cited by 80
“Increasing the heating rate also led to an increase in the maximum rate of da/dt of the TG curve (Ferdous et al., 2002; Hu et al., 2007).”
BackgroundInfluentialFlame Retardant of Cellulosic Materials and Their Composites
Mohamed, A. L., & Hassabo, A. G. (2015) · Engineering materials · doi:10.1007/978-3-319-03467-6_10 · Cited by 76
Fast pyrolysis of Kraft lignin—Vapor cracking over various fixed-bed catalysts
Choi, H. S., & Meier, D. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.12.025 · Cited by 80
Chen, R., Lun, L., Cong, K., Li, Q., & Zhang, Y. (2019) · Energy · doi:10.1016/j.energy.2019.06.127 · Cited by 77
Lumped Approach in Kinetic Modeling of Microwave Pyrolysis of Kraft Lignin
Farag, S., Kouisni, L., & Chaouki, J. (2014) · Energy & Fuels · doi:10.1021/ef4023493 · Cited by 73
Xu, X., Tu, R., Sun, Y., Li, Z., & Jiang, E. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.037 · Cited by 73
Selective conversion of lignin to ethylbenzene
Luo, Z., Qin, S., Chen, S., Hui, Y., & Zhao, C. (2020) · Green Chemistry · doi:10.1039/c9gc04246f · Cited by 71
Fast pyrolysis of lignins with different molecular weight: Experiments and modelling
Marathe, P. S., Westerhof, R. J. M., & Kersten, S. R. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.058 · Cited by 71
Yan, J., Zhu, H., Jiang, X., Chi, Y., & Cen, K. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.05.077 · Cited by 70
Thermal Decomposition Study of Isolated Lignin Using Temperature Modulated TGA
Kubo, S., & Kadla, J. (2008) · Journal of Wood Chemistry and Technology · doi:10.1080/02773810802124928 · Cited by 71
“For example, Ferdous et al.[27] calculated the activation energy for Alcell pyrolysis to be 129–361 kJ/mol in temperature range of 272–532◦C and that of kraft lignin pyrolysis to be 80–158 kJ/mol in temperature range of 234–503◦C using the distributed activation energy model.”
MethodKenaf stems: Thermal characterization and conversion for biofuel and biochar production
Khiari, B., Ghouma, I., Ferjani, A. I., Azzaz, A. A., Jellali, S., Limousy, L., & Jeguirim, M. (2019) · Fuel · doi:10.1016/j.fuel.2019.116654 · Cited by 71
Chemical Composition and Thermal Behavior of Kraft Lignins
Ház, A., Jablonský, M., Šurina, I., Kačík, F., Bubeníková, T., & Ďurkovič, J. (2019) · Forests · doi:10.3390/f10060483 · Cited by 80
Thermal degradation and decomposition of jute/vinylester composites
Álvarez, V. A., Rodríguez, E. S., & Vázquez, A. (2005) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-005-7102-0 · Cited by 70
Metadata
- Authors
- Ferdous, D., Dalai, A. K., Bej, S. K., & Thring, R. W.
- Affiliations
- University of Saskatchewan (CA)
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-09-12
- Volume
- 16
- Issue
- 6
- Pages
- 1405-1412
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2000330305
- Semantic Scholar
- 92680dd9641a17c3e65c8f98706052b5a5efd2c9
- Cited by
- 310
- References
- 23
- Citations by year
- 2026: 12 · 2025: 19 · 2024: 11 · 2023: 11 · 2022: 14 · 2021: 19 · 2020: 13 · 2019: 26 · 2018: 18 · 2017: 24 · 2016: 13 · 2015: 20 · 2014: 16 · 2013: 17 · 2012: 12
- FWCI
- 3.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
- Keywords
- lignin pyrolysis, Alcell lignin, kraft lignin, pyrolysis kinetics, distributed activation energy model, hydrogen production, fixed-bed reactor, activation energy distribution, heating rate effects, gaseous products, lignin conversion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.