Slagging Characteristics on the Superheaters of a 12 MW Biomass-Fired Boiler
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
In an attempt to understand the problem of severe slagging in biomass-fired boilers, slags formed on the fourth-, second-, and first-stage superheaters in a 12 MW biomass-fired grate furnace have been collected, sampled, and analyzed using X-ray fluorescence (XRF) and X-ray diffraction (XRD) techniques. The slag collected on each superheater has a unique morphology and structure. The slag on the fourth-stage superheater is loose and porous, while on the secondary and the primary superheaters, the slag shows a clear layered structure of different colors and levels of hardness. Aluminosilicate is the major component in the slag on the fourth-stage superheater, which is formed by Si, Al, and alkali species. On both the secondary and primary superheaters, the sticky sylvine, potassium calcium sulfate, and aphthitalite in the bottom layer trap coarse, large particles, resulting in further slagging. In the alternating layers, the particles containing high concentrations of K, Na, and Cl form the initial deposit layer, the yellow layer in the secondary superheater. Then, it traps the coarse, large particles containing high Si, Al, Ca, Mg, and Fe to form the brown layer. Similarly, the particles in the pale-yellow layer of the primary superheater containing high concentrations of K, Na, and Cl form the initial deposit layer, and then, it traps the coarse, large particles containing high Si, Al, Ca, Mg, and Fe to form the black layer. Accompanied by the periodic blowing, the alternating layer is formed and the slag gradually becomes thicker.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alkali Metal Emission during Pyrolysis of Biomass
Olsson, J. G., Jäglid, U., Pettersson, J. B. C., & Hald, P. (1997) · Energy & Fuels · doi:10.1021/ef960096b · Cited by 261
The formation of submicron aerosol particles, HCl and SO2 in straw-fired boilers
Christensen, K. A., Stenholm, M., & Livbjerg, H. (1998) · Journal of Aerosol Science · doi:10.1016/s0021-8502(98)00013-5 · Cited by 196
Influence of deposit formation on corrosion at a straw-fired boiler
Hansen, L. A., Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., Hørlyck, S., & Karlsson, A. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(00)00063-1 · Cited by 195
Jiménez, S., & Ballester, J. (2005) · Combustion and Flame · doi:10.1016/j.combustflame.2004.12.004 · Cited by 117
Westberg, H. M., Byström, M., & Leckner, B. (2003) · Energy & Fuels · doi:10.1021/ef020060l · Cited by 105
Deposit formation on a single cylinder during combustion of herbaceous biomass
Kaufmann, H. (2000) · Fuel · doi:10.1016/s0016-2361(99)00137-4 · Cited by 52
Cited by
Niu, Y., Tan, H., & Hui, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.09.003 · Cited by 1,069
Self-citationBiomass torrefaction: properties, applications, challenges, and economy
Niu, Y., Lv, Y., Lei, Y., Liu, S., Liang, Y., Wang, D., & Hui, S. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109395 · Cited by 384
Self-citationA review of biomass ash related problems: Mechanism, solution, and outlook
Abioye, K. J., Harun, N. Y., Sufian, S., Yusuf, M., Jagaba, A. H., Ekeoma, B. C., Kamyab, H., Sikiru, S., Waqas, S., & Ibrahim, H. (2024) · Journal of the Energy Institute · doi:10.1016/j.joei.2023.101490 · Cited by 135
Niu, Y., Zhu, Y., Tan, H., Hui, S., Jing, Z., & Xu, W. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.07.038 · Cited by 121
“Otherwise, the alternating layered structure [1,4] presented in the slagging of biomass utility boiler requires the further development on the slaggingmechanisms of biomass.”
BackgroundMethodSelf-citationCorrosion Problems in Incinerators and Biomass-Fuel-Fired Boilers
Mudgal, D., Singh, S., & Prakash, S. (2014) · International Journal of Corrosion · doi:10.1155/2014/505306 · Cited by 56
Metadata
- Authors
- Niu, Y., Tan, H., Ma, L., Pourkashanian, M., Liu, Z., Liu, Y., Wang, X., Liu, H., & Xu, T.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-08-23
- Volume
- 24
- Issue
- 9
- Pages
- 5222-5227
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2088914590
- Cited by
- 92
- References
- 6
- FWCI
- 2.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.