The DOI matches its Crossref record.
MgO/Al2O3 Sorbent for CO2 Capture
Abstract
The MgO/Al 2 O 3 sorbent for CO 2 capture under low temperatures was investigated in a fixed bed. It was found that, with MgO loading of 10 wt %, MgO/Al 2 O 3 sorbent showed a maximum CO 2 capture capacity, which originated from the balance of physical adsorption and chemical absorption of the sorbent. The CO 2 capture capacity increased with the water vapor at first and then decreased. Typically, the total CO 2 capture capacities were as high as 0.97 and 1.36 mmol/g, with water vapor concentration of 0 and 13 vol %, respectively, at 60 °C with 13 vol % CO 2 . The high CO 2 concentration could be approached by the multi-stage absorption/desorption cycles, during which the sorbent could be regenerated at 350 °C and maintained stable even after 5 cycles. In addition, a deactivation model was proposed that gave good predictions of the CO 2 breakthrough curves. Results showed that sorption rate parameters obtained in the presence of water vapor were found to be larger than the corresponding values in the absence of water vapor. It was possibly caused by increasing the reactivity of the sorbent prior to the sorption of CO 2 in the presence of water vapor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Li, L., Zhao, N., Wei, W., & Sun, Y. (2013) · Fuel · doi:10.1016/j.fuel.2011.08.022 · Cited by 480
Self-citationRecent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Atmospheric CO2 mitigation technologies: carbon capture utilization and storage
Nocito, F., & Dibenedetto, A. (2020) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.10.002 · Cited by 338
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Duyar, M. S., Wang, S., Arellano-Treviño, M. A., & Farrauto, R. J. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.05.003 · Cited by 277
Development trends in porous adsorbents for carbon capture
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03149 · Cited by 127
Metadata
- Authors
- Li, L., Wen, X., Fu, X., Wang, F., Zhao, N., Xiao, F., Wei, W., & Sun, Y.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-09-30
- Volume
- 24
- Issue
- 10
- Pages
- 5773-5780
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2469417165
- Cited by
- 178
- References
- 0
- FWCI
- 14.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.