Influence of Pyrolysis Operating Conditions on Bio-Oil Components: A Microscale Study in a Pyroprobe
The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
A fast pyrolysis process has emerged as one of the techniques to produce transportation fuels using various biomass types that are regionally important. It is well understood that high heating rates, very small particles with low mass transfer limitations, and moderate operating temperatures are essential for obtaining high yield of liquid from the fast pyrolysis process. However, how the heating rates and operating temperatures would influence individual compounds in the liquid obtained from the fast pyrolysis process has not been studied in detail. Therefore, a microscale pyrolysis study was performed by changing different parameters (biomass type, filament heating rate, and final pyrolysis temperature) to understand the influence of these operating parameters on each compound formed during the process. Two biomass types (pine wood and switchgrass) were selected for this study: (i) pine wood was selected because of its availability in the southeastern region of the United States, and (ii) switchgrass was chosen because it has been identified as one of the bioenergy crops in the United States. Pyrolysis temperatures were changed from 450 to 750 °C in increments of 50 °C, whereas the heating rates selected were 50, 100, 500, 1000, and 2000 °C/s. Twenty-eight bio-oil compounds were quantified in each experimental condition. This study found that phenols and toluene concentrations increased with the increase in pyrolysis temperature irrespective to the biomass type. On the other hand, the change in the yield of ketones, furans, and guaiacols with the change in pyrolysis temperature depended on the type of biomass. The effect of filament heating rate on bio-oil yield was not statistically significant because the biomass heating rate was almost constant irrespective of different filament heating rates.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Primary stage of lignin pyrolysis containing more intense structural decomposition happens at the temperature range of 400–600 °C after initial stage, where phenolic compounds (which is both temperature induced and time induced) are the major components during this stage [146–148].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [146]
Citations
Cites
Determination of Structural Carbohydrates and Lignin in Biomass
Sluiter, A. D., Hames, B. R., Ruiz, R. O., Scarlata, C. J., Sluiter, J. B., Templeton, D. W., & Crocker, D. P. (2012) · Cited by 5,261
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
Fast pyrolysis processes for biomass
Bridgwater, A. (2000) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(99)00007-6 · Cited by 1,751
Review of biomass pyrolysis oil properties and upgrading research
Zhang, Q., Chang, J., Wang, T., & Xu, Y. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.010 · Cited by 1,472
The statistical sleuth : a course in methods of data analysis
Ramsey, F. L., & Schafer, D. W. (2002) · Cited by 1,166
Development of switchgrass (Panicum virgatum) as a bioenergy feedstock in the United States
McLaughlin, S. B., & Adams Kszos, L. (2005) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2004.05.006 · Cited by 1,091
Renewable Chemical Commodity Feedstocks from Integrated Catalytic Processing of Pyrolysis Oils
Vispute, T. P., Zhang, H., Sanna, A., Xiao, R., & Huber, G. W. (2010) · Science · doi:10.1126/science.1194218 · Cited by 1,088
Mechanisms of liquefaction and pyrolysis reactions of biomass
Demirbaş, A. (2000) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00130-2 · Cited by 934
A kinetic model for pyrolysis of cellulose
Bradbury, A. G. W., Sakai, Y., & Shafizadeh, F. (1979) · Journal of Applied Polymer Science · doi:10.1002/app.1979.070231112 · Cited by 889
Introduction to pyrolysis of biomass
Shafizadeh, F. (1982) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(82)80017-x · Cited by 789
Research works printed but not linked: 8
- Bridgwater, A. V.; Czernik, S. Diebold, J. Meier, D.; Oasamaa, A. Peacck, C. Piskorz, J. Radlein, D.Fast Pyrolysis of Biomass: A Handbook;CPL Press:Newbury, 2008; p34.
- Pattiya A., 2008, J. Anal. Appl. Pyrolysis, 81
- Kilzer F. J., 1965, Pyrodynamics, 2, 151
- Shafizadeh F., 1975, Appl. Polym. Symp., 28, 153
- Liao Y.-f., 2004, Pap.-Am. Chem. Soc., Div. Fuel Chem., 49, 407
- Bahng M.-K., 2009, Pap.-Am. Chem. Soc., Div. Fuel Chem., 54, 367
- Nimlos M. R., 2002, Fuel Chem. Div. Prepr., 47, 393
- Hwang, B.h.; Obst, J. R. Proceedings of the International Conference on Forest Products Better Utilization of Wood for Human, Earth and Future, Daejeon, Korea;The Korean Society of Wood Science and Technology, International Association of Wood Products Societies, 2003.
Cited by
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
Catalytic pyrolysis of green algae for hydrocarbon production using H+ZSM-5 catalyst
Thangalazhy-Gopakumar, S., Adhikari, S., Chattanathan, S. A., & Gupta, R. B. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.080 · Cited by 306
Self-citationCharacteristics and mechanism study of analytical fast pyrolysis of poplar wood
Dong, C.-Q., Zhang, Z.-F., Lu, Q., & Yang, Y.-P. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.12.012 · Cited by 209
“Very limited studies are available to report the detailed characteristics of biomass fast pyrolysis, based on the changes of individual products in the biooil [8–11].”
BackgroundIdentifying the primary reactions and products of fast pyrolysis of alkali lignin
Supriyanto, Usino, D. O., Ylitervo, P., Dou, J., Sipponen, M. H., & Richards, T. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104917 · Cited by 54
Metadata
- Authors
- Thangalazhy-Gopakumar, S., Adhikari, S., Gupta, R. B., & Fernando, S. D.
- Affiliations
- Auburn University (US)
- Texas A&M University (US)
- Corresponding author
- Adhikari, Sushil
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-01-31
- Volume
- 25
- Issue
- 3
- Pages
- 1191-1199
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2325092817
- Cited by
- 81
- References
- 54
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 3 · 2023: 5 · 2022: 4 · 2021: 4 · 2020: 7 · 2019: 4 · 2018: 6 · 2017: 7 · 2016: 6 · 2015: 9 · 2014: 8 · 2013: 7 · 2012: 7
- FWCI
- 4.54
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- Funders
- Auburn University
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
- Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
- Keywords
- fast pyrolysis, bio-oil composition, heating rate, pyrolysis temperature, pine forest, switchgrass, phenols, toluene, ketones, furan, guaiacol, filament heating, biofuels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.