K2CO3/Al2O3 for Capturing CO2 in Flue Gas from Power Plants. Part 1: Carbonation Behaviors of K2CO3/Al2O3
The DOI matches its Crossref record.
Abstract
The present paper is the first part of a series of papers about a systematical investigation on the application of the K 2 CO 3 /Al 2 O 3 sorbent for capturing CO 2 in flue gas. It was focused on the carbonation behaviors of K 2 CO 3 /Al 2 O 3 in a thermogravimetric analyzer. The effects of the temperature, gas composition, and pressure on the reactions were studied by analyzing the experimental breakthrough data. It was found that K 2 CO 3 /Al 2 O 3 shows a high CO 2 capture capacity and its carbonation conversion reaches 68.3–91.8% in 20 min when the reaction temperature is in the range of 55–75 °C, the CO 2 concentration is in the range of 5–20%, the H 2 O concentration is in the range of 12–21%, and the pressure is 0.1 MPa. The total carbonation conversion mainly depends upon the reaction in the first 5 min, and the reaction rate reaches the maximum in about 2 min. The total carbonation conversion increases with the increase of CO 2 and H 2 O concentrations but decreases with the increase of the temperature and pressure. Among the factors studied, the H 2 O concentration and pressure were found to have a significant impact on the carbonation. Moreover, water pretreatment of the sorbent plays an important role in the carbonation reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
Duyar, M. S., Wang, S., Arellano-Treviño, M. A., & Farrauto, R. J. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.05.003 · Cited by 277
Karimi, M., C. Silva, J. A., Gonçalves, C. N. D. P., L. Diaz de Tuesta, J., Rodrigues, A. E., & Gomes, H. T. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00953 · Cited by 70
Compost from Municipal Solid Wastes as a Source of Biochar for CO 2 Capture
Karimi, M., Diaz de Tuesta, J. L., d. P. Gonçalves, C. N., Gomes, H. T., Rodrigues, A. E., & Silva, J. A. C. (2020) · Chemical Engineering & Technology · doi:10.1002/ceat.201900108 · Cited by 68
Metadata
- Authors
- Zhao, C., Chen, X., & Zhao, C.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-01-20
- Volume
- 26
- Issue
- 2
- Pages
- 1401-1405
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2330850248
- Cited by
- 76
- References
- 0
- FWCI
- 9.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.