CO2 Capture in Chemically and Thermally Modified Activated Carbons Using Breakthrough Measurements: Experimental and Modeling Study
Open accessThe DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Abstract
The development of adsorption-based technologies for CO 2 capture in the postcombustion processes requires finding materials with high capacity of adsorption and low cost of preparation. In this study, the modification of a commercial activated carbon (Norit ROX 0.8), considered as a solid adsorbent for CO 2 capture, and the effects of different methods of activations, chemically (hydrogen peroxide, sulfuric acid, nitric acid, and urea) and thermally (at 800 °C) on adsorption performance, have been investigated. Then, CO 2 adsorption capacity was studied at different temperatures and pressures to evaluate the effects of various agents on sample performance. The textural properties of the samples were determined using adsorption–desorption isotherms of nitrogen at −196 °C. Finally, the obtained data were modeled by Response Surface Methodology (RSM) and Langmuir isotherm. The results showed that the prepared sample by successive treatments with nitric acid, urea, and thermal calcination has a higher uptake capacity than other modified samples.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“generally, gas adsorption onto the porous carbons has a lower heat of adsorption than other sorbents [17], which nominates this adsorbent as an excellent candidate for cyclic adsorption processes [46].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [17]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Modeling and optimization I: Usability of response surface methodology
Baş, D., & Boyacı, İ. H. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2005.11.024 · Cited by 2,151
Research works printed but not linked: 4
- Tangang F. T., 2012, Sains Malays., 41, 1355
- Becnel J. M., 2002, American Society for Engineering Education Annual Conference & Exposition
- Pérez N., 2007, Lat. Am. Appl. Res., 37, 157
- Patrick J., 1995, Porosity in carbons: characterization and applications
Cited by
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Self-citationKarimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Self-citationKarimi, M., Rodrigues, A. E., & Silva, J. A. C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130538 · Cited by 78
Self-citationCompost from Municipal Solid Wastes as a Source of Biochar for CO 2 Capture
Karimi, M., Diaz de Tuesta, J. L., d. P. Gonçalves, C. N., Gomes, H. T., Rodrigues, A. E., & Silva, J. A. C. (2020) · Chemical Engineering & Technology · doi:10.1002/ceat.201900108 · Cited by 68
Self-citationKarimi, M., Zafanelli, L. F. A. S., Almeida, J. P. P., Ströher, G. R., Rodrigues, A. E., & Silva, J. A. C. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104069 · Cited by 66
Self-citation
Metadata
- Authors
- Karimi, M., C. Silva, J. A., Gonçalves, C. N. D. P., L. Diaz de Tuesta, J., Rodrigues, A. E., & Gomes, H. T.
- Affiliations
- Universidade do Porto (PT)
- Laboratory of Separation and Reaction Engineering (LSRE), Department of Chemical and Biological Technology, Polytechnic Institute of Bragança, Campus de Santa Apolonia, 5300-857 Bragança, Portugal
- Universidade Politécnica de Bragança (PT)
- Laboratory of Separation and Reaction Engineering - Laboratory of Catalysis and Materials (LSRE/LCM), Department of Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, S/N, 4099-002 Porto, Portugal
- Corresponding author
- Karimi, Mohsen
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-19
- Volume
- 57
- Issue
- 32
- Pages
- 11154-11166
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2883525495
- Semantic Scholar
- 1793374e7178db8f6619ceb56a2cdc6396b1bba1
- Cited by
- 70
- References
- 69
- Citations by year
- 2026: 9 · 2025: 7 · 2024: 8 · 2023: 15 · 2022: 10 · 2021: 9 · 2020: 7 · 2019: 4 · 2018: 1
- FWCI
- 3.35
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) (submittedVersion, other-oa)
- Funders
- European Regional Development Fund (POCI-01-0145-FEDER-006984, 0119_VALORCOMP_2_P)
- Fundação para a Ciência e a Tecnologia (0119_VALORCOMP_2_P, POCI-01-0145-FEDER-006984)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Keywords
- CO2 capture, activated carbon, post-combustion carbon capture, thermal activation, nitric acid treatment, urea treatment, hydrogen peroxide treatment, sulfuric acid treatment, adsorption capacity, Langmuir isotherm, response surface methodology, textural properties, adsorbent modification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CO2 Capture in Chemically and Thermally Modified Activated Carbons Using Breakthrough Measurements: Experimental and Modeling Study. https://app.cochat.ai/papers/10.1021/acs.iecr.8b00953
- The paper
- Karimi, M., C. Silva, J. A., Gonçalves, C. N. D. P., L. Diaz de Tuesta, J., Rodrigues, A. E., & Gomes, H. T. (2018). CO2 Capture in Chemically and Thermally Modified Activated Carbons Using Breakthrough Measurements: Experimental and Modeling Study. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.8b00953
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.