Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 272

The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.

Fuel Indexes: A Novel Method for the Evaluation of Relevant Combustion Properties of New Biomass Fuels

Sommersacher, Peter, Brunner, Thomas, Obernberger, Ingwald · 2012 · Energy & Fuels

Abstract

The increasing demand for biomass fuels leads to the introduction of new biomass fuels into the market. These new biomass fuels (e.g., wastes and residues from agriculture and the food industry, short rotation coppices, and energy crops) are usually not well-defined regarding their combustion behavior. Therefore, fuel characterization methods with a special focus on combustion-related problems (gaseous NO x, HCl, and SO x emissions, ash-melting behavior, and PM emissions) have to be developed. For this purpose, fuel indexes are an interesting option. Fuel indexes are derived from chemical fuel analyses and are checked and evaluated regarding their applicability by measurements performed at lab- and real-scale combustion plants for a large variety of fuels. They provide the possibilities for a pre-evaluation of combustion-relevant problems that may arise from the use of a new biomass fuel. A possible relation to describe the corrosion risk is, for instance, the molar 2S/Cl ratio. The N content in the fuel is an indicator for NO x emissions, and the sum of the concentrations of K, Na, Zn, and Pb in the fuel can give a prediction of the aerosol emissions, whereas the molar (K + Na)/[ x (2S + Cl)] ratio provides a first indication regarding the potential for gaseous HCl and SO x emissions. The molar Si/K ratio can supply information about the K release from the fuel to the gas phase. The molar Si/(Ca + Mg) ratio can give indications regarding the ash-melting temperatures for P-poor fuels. For P-rich fuels, the (Si + P + K)/(Ca + Mg) ratio can be used for the same purpose. The fuel indexes mentioned can provide a first pre-evaluation of combustion-relevant properties of biomass fuels. Therefore, time-consuming and expensive combustion tests can partly be saved. The indexes mentioned are especially developed for grate combustion plants, because interactions of the bed material possible in fluidized-bed combustion systems are not considered.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef201282y

Cites

19 of 19 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Metadata

Authors
Sommersacher, P., Brunner, T., & Obernberger, I.
Venue
Energy & Fuels
Published
2011-12-16
Volume
26
Issue
1
Pages
380-390
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2330544120
Cited by
272
References
19
FWCI
5.29
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.