The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Biomass Oxidative Flash Pyrolysis: Autothermal Operation, Yields and Product Properties
Abstract
Biomass autothermal flash pyrolysis has been carried out by adding oxygen to the reaction environment in a bench-scale plant provided with a conical spouted bed reactor, at 500 °C and using two oxygen concentrations in the inlet gas stream (2.5 and 4.1 vol %, which correspond to equivalence ratios of 15 and 25, respectively). An increase in the oxygen concentration leads to an increase in gas and water yields, whereas there is a decrease in the yield of both char (partially burned) and organic compounds in the bio-oil, albeit only slightly in the latter case. Bio-oil composition undergoes only minor changes for certain individual components. The experimental results highlight the advantages of the conical spouted bed reactor (CSBR) for scaling up the autothermal operation. A study on energy requirements reveals that the oxygen concentration needed to achieve autothermal operation decreases as the scale is larger. The oxygen content required in the inlet gas stream for autothermal operation in an industrial-scale plant of 500 kg h –1 is 2.7 vol %, and neither bio-oil yield nor composition is significantly affected, being similar to the case of operating in an inert atmosphere.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
FitzPatrick, M., Champagne, P., Cunningham, M. F., & Whitney, R. A. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.125 · Cited by 810
Biorefineries: Current status, challenges, and future direction
Fernando, S., Adhikari, S., Chandrapal, C., & Murali, N. (2006) · Energy & Fuels · doi:10.1021/ef060097w · Cited by 709
Fast Pyrolysis Bio-Oils from Wood and Agricultural Residues
Oasmaa, A., Solantausta, Y., Arpiainen, V., Kuoppala, E., & Sipilä, K. (2010) · Energy & Fuels · doi:10.1021/ef901107f · Cited by 407
Cited by
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Auger reactors for pyrolysis of biomass and wastes
Campuzano, F., Brown, R. C., & Martínez, J. D. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.014 · Cited by 339
Bio-oil production from rice husk fast pyrolysis in a conical spouted bed reactor
Alvarez, J., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.02.074 · Cited by 329
Self-citationEfficiency and proportions of waste tyre pyrolysis products depending on the reactor type—A review
Lewandowski, W. M., Januszewicz, K., & Kosakowski, W. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.03.018 · Cited by 282
Perkins, G., Bhaskar, T., & Konarova, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.048 · Cited by 267
Metadata
- Authors
- Amutio, M., Lopez, G., Aguado, R., Bilbao, J., & Olazar, M.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-01-30
- Volume
- 26
- Issue
- 2
- Pages
- 1353-1362
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2318957825
- Cited by
- 168
- References
- 5
- FWCI
- 7.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.