Effect of Torrefaction on Bio-oil Upgrading over HZSM-5. Part 1: Product Yield, Product Quality, and Catalyst Effectiveness for Benzene, Toluene, Ethylbenzene, and Xylene Production
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A three-step bio-oil production process involving torrefaction pretreatment (at 225, 250, or 275 °C with a 20 min hold time), pyrolysis (at 500 °C with two heating rates), and secondary catalytic processing over HZSM-5 (at 400, 450, or 500 °C) was studied to determine process effects, particularly of torrefaction, on the yield of liquid and aromatic hydrocarbons and the quality of upgraded bio-oil. When bio-oils derived from torrefied biomass were catalytically cracked, average yields (%, w/w of feed) of reactor char (100% reduction), catalyst coke (21.4%), and catalyst tar (8.1%) were significantly reduced relative to the best-case conditions using non-torrefied feedstock. The reduction in coke (%, w/w of feed) as a result of torrefaction was 28.5% relative to the respective control for slow-pyrolysis bio-oil upgrading and 34.9% for fast-pyrolysis bio-oil upgrading. The concentration of aromatic product (benzene, toluene, ethylbenzene, and xylene, i.e., BTEX) was highest at 95 g L –1 for upgraded (at 500 °C) fast-pyrolysis bio-oil derived from biomass torrefied at 275 °C. Catalyst effectiveness for BTEX production significantly increased with increased torrefaction and catalytic cracking temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impact of torrefaction on the grindability and fuel characteristics of forest biomass
Phanphanich, M., & Mani, S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.08.028 · Cited by 892
Self-citation
Cited by
Upgrading biomass fuels via wet torrefaction: A review and comparison with dry torrefaction
Bach, Q.-V., & Skreiberg, Ø. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.014 · Cited by 431
Py-GC/MS analysis on product distribution of two-staged biomass pyrolysis
Cai, W., Liu, Q., Shen, D., & Wang, J. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.12.007 · Cited by 66
Klemetsrud, B., Eatherton, D., & Shonnard, D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02836 · Cited by 31
Metadata
- Authors
- Hilten, R. N., Speir, R. A., Kastner, J. R., Mani, S., & Das, K. C.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-16
- Volume
- 27
- Issue
- 2
- Pages
- 830-843
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2318114494
- Cited by
- 39
- References
- 1
- FWCI
- 2.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.