CoChat

Characterization of Gaseous and Particulate Emissions From a Turboshaft Engine Burning Conventional, Alternative, and Surrogate Fuels

The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.

Abstract

The effect of fuel composition on the operability and gaseous and particulate matter (PM) emissions of an Allison T63-A-700 turboshaft engine operated at four power settings was investigated in this effort. Testing was performed with a specification JP-8, a synthetic paraffinic kerosene, and four two-component surrogate mixtures that comprise compound classes within current and future alternative fuels. Comparable engine operability was observed for all fuels during this study. Major gaseous emissions were only slightly effected, with trends consistent with those expected based on the overall hydrogen content of the fuels. However, minor hydrocarbon and aldehyde emissions were significantly more sensitive to the fuel chemical composition. Linear correlations between speciated hydrocarbon and aldehyde emissions were observed over the full engine operating range for the fuels tested. The corresponding slopes were dependent on the fuel composition, indicating that fuel chemistry affects the selectivity to specific decomposition pathways. Unburned fuel components were observed in the engine exhaust during operation with all fuels, demonstrating that completely unreacted fuel compounds can pass through the high temperature/pressure combustion zone. Nonvolatile PM emissions (soot) were strongly affected by the fuel chemical composition. Paraffinic fuels produced significantly lower PM number and mass emissions relative to aromatic-containing fuels, with the paraffin structure affecting sooting propensity. The observations are consistent with those expected based on simplified soot formation mechanisms, where fuels with direct precursors for polycyclic aromatic hydrocarbon formation have higher PM formation rates. The effect of a specific chemical structure on the relative PM production is important as this would not be evident when comparing sooting tendencies of fuels based on bulk fuel properties. All fuels produced similar single log-normal size distributions of soot, with higher sooting fuels producing larger mean diameter particles. It is hypothesized that the controlling growth and formation mechanisms for PM production are similar for different fuel chemistries in this regime, with composition primarily affecting soot formation rate. This hypothesis was supported by preliminary TEM analyses that showed similar soot microstructures during operation with either conventional JP-8 or alternative fuels. Overall, this study provides additional and improved insight into the effect of fuel chemical composition on complex combustion chemistry and emissions propensity in a gas turbine engine, and can assist with the successful development of predictive modeling tools.

Overview

Integrity signals

Registry

Crossref · 10.1021/ef400009c

Cites

37 of 37 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 37 references

Research works printed but not linked: 5

  1. Cain, J. P.Development of a novel heterogeneous kinetics reactor and chemical characterization of soot particles. Ph.D. Dissertation, University of Southern California, Los Angeles, 2011.
  2. Lobo, P.; Whitefield, P. D.; Hagen, D. E.; Rye, L. J.; Blakey, S.; Wilson, C. W.; Williams, P. I.; Christie, S.; Raper, D.; Uryga-Bugajska, I.; Pourkashanian, M.SAE E31 Methodology Development and Associated PM Emissions Characteristics of Aircraft APUs Burning Conventional and Alternative Aviation Fuels; PARTNER-COE-2011-005;The Partnership for Air Transportation Noise and Emissions Reduction:Cambridge, MA, July, 2011.
  3. Knighton, W. B.; Herndon, S. C.; Woods, E.; Miake-Lye, R. C.; Timko, M.; Yu, Z.; Beyersdorf, A. J.; Winstead, E. L.; Anderson, B. E.; Wey, C.; Bulzan, D.,A method of characterizing aircraft engine exhaust emissions. In50th AIAA Aerospace Sciences Meeting Proceedings, Jan 6–9, Nashville, TN, 2012; AIAA:Reston, VA, 2012.
  4. Anneken D., 2012, Prepr. Symp.-Am. Chem. Soc., Div. Fuel Chem., 57, ENFL-188
  5. Lefebvre A. H., 2010, Gas Turbine Combustion: Alternative Fuels and Emissions, 10.1201/9781420086058 · doi:10.1201/9781420086058 · Paper page

Cited by

Metadata

Authors
Cain, J., DeWitt, M. J., Blunck, D., Corporan, E., Striebich, R., Anneken, D., Klingshirn, C., Roquemore, W. M., & Vander Wal, R.
Affiliations
  • National Academies of Sciences, Engineering, and Medicine (US)
  • University of Dayton Research Institute (US)
  • United States Air Force Research Laboratory (US)
  • Pennsylvania State University, 203 Hosler Bldg., University Park, Pennsylvania 16802, United States
Corresponding author
DeWitt, Matthew J.
Venue
Energy & Fuels
Published
2013-04-08
Volume
27
Issue
4
Pages
2290-2302
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2312639045
Cited by
65
References
37
Citations by year
2026: 3 · 2025: 7 · 2024: 7 · 2023: 2 · 2022: 9 · 2021: 8 · 2020: 4 · 2019: 5 · 2018: 5 · 2017: 3 · 2016: 4 · 2015: 5 · 2014: 3
FWCI
3.18
Type
journal article
Language
en
Open access
closed
Locations
Energy & Fuels (publishedVersion)
Topics
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
  • Physical Sciences › Engineering › Computational Mechanics › Heat transfer and supercritical fluids
  • Physical Sciences › Engineering › Automotive Engineering › Engine and Fuel Emissions
Keywords
JP-8, synthetic paraffinic kerosene, surrogate fuels, alternative fuels, fuel composition, hydrocarbon emissions, aldehyde emissions, soot formation, particulate matter, unburned fuel, soot size distribution, soot microstructure, gas turbine combustion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.