Hydropyrolysis of Lignin Using Pd/HZSM-5
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The aim of this work was to study the formation of cycloalkanes from hydropyrolysis of lignin with HZSM-5 and Pd/HZSM-5 catalysts. Cycloalkanes are high-octane-rating molecules and are a major component of jet fuels. We observed that palladium supported on HZSM-5 catalyzed hydrogenation and deoxygenation reactions that converted phenolic compounds into aromatic hydrocarbons and cycloalkanes. This in situ study analyzed the effect of the catalyst-to-lignin ratio, H 2 partial pressure, and temperature on the yields of hydrocarbons with HZSM-5 and 1 wt % Pd/HZSM-5. Pd/HZSM-5 produced 44% more aromatic hydrocarbons than HZSM-5 at a catalyst-to-lignin ratio of 20:1, 650 °C, and a constant H 2 partial pressure of 1.7 MPa. The presence of palladium led to a significant difference in yields only at 1.7 MPa H 2 partial pressure. In addition, the hydropyrolysis temperature played a substantial role in the equilibrium conversion of hydrogenation reactions that led to cycloalkanes directly from lignin. In an attempt to bypass the thermal limitations of the in situ process, we performed ex situ catalytic upgrading experiments and also observed formation of cycloalkanes at a hydropyrolysis temperature of 650 °C, packed bed temperature of 300 °C, and H 2 partial pressure of 1.7 MPa.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Catalytic fast pyrolysis of aspen lignin via Py-GC/MS
Zhang, M., Resende, F. L. P., & Moutsoglou, A. (2014) · Fuel · doi:10.1016/j.fuel.2013.07.128 · Cited by 159
Self-citation
Cited by
Downstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Selective production of arenes via direct lignin upgrading over a niobium-based catalyst
Shao, Y., Xia, Q., Dong, L., Liu, X., Han, X., Parker, S. F., Cheng, Y., Daemen, L. L., Ramirez-Cuesta, A. J., Yang, S., et al. (2017) · Nature Communications · doi:10.1038/ncomms16104 · Cited by 506
Dabros, T. M. H., Stummann, M. Z., Høj, M., Jensen, P. A., Grunwaldt, J.-D., Gabrielsen, J., Mortensen, P. M., & Jensen, A. D. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.05.002 · Cited by 309
Breaking the Limit of Lignin Monomer Production via Cleavage of Interunit Carbon–Carbon Linkages
Dong, L., Lin, L., Han, X., Si, X., Liu, X., Guo, Y., Lu, F., Rudić, S., Parker, S. F., Yang, S., et al. (2019) · Chem · doi:10.1016/j.chempr.2019.03.007 · Cited by 270
Emerging heterogeneous catalysts for biomass conversion: studies of the reaction mechanism
Lin, L., Han, X., Han, B., & Yang, S. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00039j · Cited by 269
Metadata
- Authors
- Jan, O., Marchand, R., Anjos, L. C. A., Seufitelli, G. V. S., Nikolla, E., & Resende, F. L. P.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-13
- Volume
- 29
- Issue
- 3
- Pages
- 1793-1800
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2316961324
- Cited by
- 123
- References
- 2
- FWCI
- 4.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydropyrolysis of Lignin Using Pd/HZSM-5. https://app.cochat.ai/papers/10.1021/ef502779s
- The paper
- Jan, O., Marchand, R., Anjos, L. C. A., Seufitelli, G. V. S., Nikolla, E., & Resende, F. L. P. (2015). Hydropyrolysis of Lignin Using Pd/HZSM-5. Energy & Fuels. https://doi.org/10.1021/ef502779s
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.