Breaking of Water-in-Crude-Oil Emulsions. 2. Influence of Asphaltene Concentration and Diluent Nature on Demulsifier Action
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The stability of water-in-oil emulsions formed during oil slicks or petroleum production operations is ensured by natural surfactant molecules (principally asphaltenes) that are present in the crude oil. These persistent emulsions may be broken by adding a suitable demulsifier at the proper concentration to attain a so-called optimum formulation at which the stability of the emulsion is minimum. In this report, the concentration of asphaltenes is varied by diluting the crude oil with a solvent such as cyclohexane, toluene, or mixtures of them. The experimental evidence shows that there exists some critical asphaltene concentration at which the interfacial zone seems to be saturated. Beyond this threshold, which is typically around 1000 ppm of asphaltenes, the demulsifier concentration necessary to attain the emulsionʼs quickest breaking is constant. Below it, e.g. when the crude is highly diluted with a solvent, the optimum demulsifier concentration is found to be proportional to the asphaltene concentration. The map of emulsion stability versus asphaltene and demulsifier concentrations exhibits a typical pattern for different demulsifiers and diluents, which contributes to improving the interpretation of the demulsifying action.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Demulsification of Crude Oil Emulsions: Correlation to Microemulsion Phase Behavior
Goldszal, A., & Bourrel, M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990922e · Cited by 132
Cited by
Grenoble, Z., & Trabelsi, S. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.08.003 · Cited by 120
Chemical Interactions and Demulsifier Characteristics for Enhanced Oil Recovery Applications
Nguyen, D., Sadeghi, N., & Houston, C. (2012) · Energy & Fuels · doi:10.1021/ef201800b · Cited by 90
A new method to select demulsifiers and optimize dosage at wet crude oil separation facilities
Raynel, G., Salomon Marques, D., Al-Khabaz, S., Al-Thabet, M., & Oshinowo, L. (2021) · Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles · doi:10.2516/ogst/2020096 · Cited by 18
Metadata
- Authors
- Rondón, M., Pereira, J. C., Bouriat, P., Graciaa, A., Lachaise, J., & Salager, J.-L.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-10-12
- Volume
- 22
- Issue
- 2
- Pages
- 702-707
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1983994838
- Cited by
- 120
- References
- 1
- FWCI
- 1.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.