The DOI matches its Crossref record.
Methane Combustion in a 500 Wth Chemical-Looping Combustion System Using an Impregnated Ni-Based Oxygen Carrier
Open accessAbstract
Chemical-looping combustion (CLC) is a promising method for the combustion of fuel gas with CO 2 capture and sequestration (CCS). This paper presents the methane combustion results obtained in a continuous CLC prototype using an oxygen carrier containing 18 wt % NiO impregnated on alumina. The design of the CLC prototype was a circulating fluidized bed reactor, consisting of two interconnected fluidized bed reactors, the fuel reactor (FR) and the air reactor (AR). The main operating conditions affecting combustion, such as fuel gas flow, solids circulation rate, and FR temperature, were analyzed. The CLC operation was carried out using methane as fuel gas in the FR with a thermal power between 500 and 850 W th . The prototype was successfully operated during 100 h, of which 70 h was at combustion conditions. No methane was detected at the FR exit, with CO and H 2 being the unconverted gases. Increasing the temperature in the FR or the solids circulation rates increased the combustion efficiency, reaching efficiency values as high as 99% at temperatures in the range of 1073−1153 K, and a solid inventory in the FR of 600 kg per MW th . The effect of operating conditions on the performance of the oxygen carrier in the CLC prototype was analyzed. During operation of the CLC prototype, no signs of agglomeration or carbon formation were detected and the main properties of particles did not vary. The two different phases in the oxygen carrier, NiO and NiAl 2 O 4, were active to transfer oxygen to the fuel gas. The NiO/NiAl 2 O 4 ratio increased with a decrease in the solids circulation rate, which affected to the reactivity of the oxygen carrier.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Progress in Chemical-Looping Combustion and Reforming technologies
Adanez, J., Abad, A., Garcia-Labiano, F., Gayan, P., & de Diego, L. F. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.09.001 · Cited by 2,230
Self-citationChemical looping combustion of solid fuels
Adánez, J., Abad, A., Mendiara, T., Gayán, P., de Diego, L. F., & García-Labiano, F. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.07.005 · Cited by 612
Self-citationIntegrated CO2 Capture and Conversion as an Efficient Process for Fuels from Greenhouse Gases
Kim, S. M., Abdala, P. M., Broda, M., Hosseini, D., Copéret, C., & Müller, C. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03063 · Cited by 290
Present status and overview of Chemical Looping Combustion technology
Nandy, A., Loha, C., Gu, S., Sarkar, P., Karmakar, M. K., & Chatterjee, P. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.003 · Cited by 275
Metadata
- Authors
- Adánez, J., Dueso, C., de Diego, L. F., García-Labiano, F., Gayán, P., & Abad, A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-05
- Volume
- 23
- Issue
- 1
- Pages
- 130-142
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2092398801
- Cited by
- 167
- References
- 0
- FWCI
- 5.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Methane Combustion in a 500 Wth Chemical-Looping Combustion System Using an Impregnated Ni-Based Oxygen Carrier. https://app.cochat.ai/papers/10.1021/ef8005146
- The paper
- Adánez, J., Dueso, C., de Diego, L. F., García-Labiano, F., Gayán, P., & Abad, A. (2009). Methane Combustion in a 500 Wth Chemical-Looping Combustion System Using an Impregnated Ni-Based Oxygen Carrier. Energy & Fuels. https://doi.org/10.1021/ef8005146
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.