The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Catalytic Hydroprocessing of Chemical Models for Bio-oil
Abstract
Bio-oil (product liquids from fast pyrolysis of biomass) is a complex mixture of oxygenates derived from the thermal breakdown of the biopolymers in biomass. In the case of lignocellulosic biomass, the structures of three major components, cellulose, hemicellulose and lignin, are well-represented by the bio-oil components. To study the chemical mechanisms of catalytic hydroprocessing of bio-oil, three model compounds were chosen to represent those components. Guaiacol represents the large number of mono- and dimethoxy phenols found in bio-oil derived from soft- or hardwood, respectively. Furfural represents a major pyrolysis product group from cellulosics. Acetic acid is a major product from biomass pyrolysis, derived from the hemicellulose, which has important impacts on the further processing of the bio-oil because of its acidic character. These three compounds were processed using a palladium or ruthenium catalyst over a temperature range from 150 to 300 °C. The batch reactor was sampled during each test over a period of 4 h. The samples were analyzed by gas chromatography with both a mass selective detector and a flame ionization detector. The products were determined, and the reaction pathways for their formation are suggested on the basis of these results. Both temperature and catalyst metal have significant effects on the product composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elliott, D. C., Hart, T. R., & Neuenschwander, G. G. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060031o · Cited by 159
Self-citation
Cited by
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
A review of catalytic upgrading of bio-oil to engine fuels
Mortensen, P. M., Grunwaldt, J.-D., Jensen, P. A., Knudsen, K. G., & Jensen, A. D. (2011) · Applied Catalysis A: General · doi:10.1016/j.apcata.2011.08.046 · Cited by 1,768
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Metadata
- Authors
- Elliott, D. C., & Hart, T. R.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-12
- Volume
- 23
- Issue
- 2
- Pages
- 631-637
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2032900483
- Cited by
- 367
- References
- 2
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.