The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Catalytic Hydroprocessing of Chemical Models for Bio-oil
Abstract
Bio-oil (product liquids from fast pyrolysis of biomass) is a complex mixture of oxygenates derived from the thermal breakdown of the biopolymers in biomass. In the case of lignocellulosic biomass, the structures of three major components, cellulose, hemicellulose and lignin, are well-represented by the bio-oil components. To study the chemical mechanisms of catalytic hydroprocessing of bio-oil, three model compounds were chosen to represent those components. Guaiacol represents the large number of mono- and dimethoxy phenols found in bio-oil derived from soft- or hardwood, respectively. Furfural represents a major pyrolysis product group from cellulosics. Acetic acid is a major product from biomass pyrolysis, derived from the hemicellulose, which has important impacts on the further processing of the bio-oil because of its acidic character. These three compounds were processed using a palladium or ruthenium catalyst over a temperature range from 150 to 300 °C. The batch reactor was sampled during each test over a period of 4 h. The samples were analyzed by gas chromatography with both a mass selective detector and a flame ionization detector. The products were determined, and the reaction pathways for their formation are suggested on the basis of these results. Both temperature and catalyst metal have significant effects on the product composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elliott, D. C., Hart, T. R., & Neuenschwander, G. G. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060031o · Cited by 159
Self-citation
Cited by
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
A review of catalytic upgrading of bio-oil to engine fuels
Mortensen, P. M., Grunwaldt, J.-D., Jensen, P. A., Knudsen, K. G., & Jensen, A. D. (2011) · Applied Catalysis A: General · doi:10.1016/j.apcata.2011.08.046 · Cited by 1,768
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Upgrading of lignin-derived bio-oils by catalytic hydrodeoxygenation
Saidi, M., Samimi, F., Karimipourfard, D., Nimmanwudipong, T., Gates, B. C., & Rahimpour, M. R. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43081b · Cited by 944
Recent Advances in Hydrotreating of Pyrolysis Bio-Oil and Its Oxygen-Containing Model Compounds
Wang, H., Male, J., & Wang, Y. (2013) · ACS Catalysis · doi:10.1021/cs400069z · Cited by 714
Lam, E., & Luong, J. H. T. (2014) · ACS Catalysis · doi:10.1021/cs5008393 · Cited by 704
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Recent advances in hydrodeoxygenation of biomass-derived oxygenates over heterogeneous catalysts
Kim, S., Kwon, E. E., Kim, Y. T., Jung, S., Kim, H. J., Huber, G. W., & Lee, J. (2019) · Green Chemistry · doi:10.1039/c9gc01210a · Cited by 535
Selective conversion of furfural to methylfuran over silica-supported NiFe bimetallic catalysts
Sitthisa, S., An, W., & Resasco, D. E. (2011) · Journal of Catalysis · doi:10.1016/j.jcat.2011.09.005 · Cited by 525
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Carbon-supported bimetallic Pd–Fe catalysts for vapor-phase hydrodeoxygenation of guaiacol
Sun, J., Karim, A. M., Zhang, H., Kovarik, L., Li, X. S., Hensley, A. J., McEwen, J.-S., & Wang, Y. (2013) · Journal of Catalysis · doi:10.1016/j.jcat.2013.05.020 · Cited by 448
Screening of Catalysts for Hydrodeoxygenation of Phenol as a Model Compound for Bio-oil
Mortensen, P. M., Grunwaldt, J.-D., Jensen, P. A., & Jensen, A. D. (2013) · ACS Catalysis · doi:10.1021/cs400266e · Cited by 415
A review on the upgradation techniques of pyrolysis oil
Gollakota, A. R. K., Reddy, M., Subramanyam, M. D., & Kishore, N. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.180 · Cited by 395
Challenges and Opportunities for Bio-oil Refining: A Review
Pinheiro Pires, A. P., Arauzo, J., Fonts, I., Domine, M. E., Fernández Arroyo, A., Garcia-Perez, M. E., Montoya, J., Chejne, F., Pfromm, P., & Garcia-Perez, M. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00039 · Cited by 385
Gas-phase hydrodeoxygenation of guaiacol over Fe/SiO2 catalyst
Olcese, R. N., Bettahar, M., Petitjean, D., Malaman, B., Giovanella, F., & Dufour, A. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.12.005 · Cited by 356
Arun, N., Sharma, R. V., & Dalai, A. K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.074 · Cited by 332
A review of production and upgrading of algal bio-oil
Saber, M., Nakhshiniev, B., & Yoshikawa, K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.342 · Cited by 332
Dabros, T. M. H., Stummann, M. Z., Høj, M., Jensen, P. A., Grunwaldt, J.-D., Gabrielsen, J., Mortensen, P. M., & Jensen, A. D. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.05.002 · Cited by 309
Catalytic Hydrodeoxygenation of Guaiacol on Rh-Based and Sulfided CoMo and NiMo Catalysts
Lin, Y.-C., Li, C.-L., Wan, H.-P., Lee, H.-T., & Liu, C.-F. (2011) · Energy & Fuels · doi:10.1021/ef101521z · Cited by 298
State-of-the-art of fast pyrolysis in IEA bioenergy member countries
Meier, D., van de Beld, B., Bridgwater, A. V., Elliott, D. C., Oasmaa, A., & Preto, F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.061 · Cited by 295
Self-citationHydrotreatment of pyrolysis bio-oil: A review
Han, Y., Gholizadeh, M., Tran, C.-C., Kaliaguine, S., Li, C.-Z., Olarte, M., & Garcia-Perez, M. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106140 · Cited by 292
Biomass fast pyrolysis in a fluidized bed reactor under N2, CO2, CO, CH4 and H2 atmospheres
Zhang, H., Xiao, R., Wang, D., He, G., Shao, S., Zhang, J., & Zhong, Z. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.12.075 · Cited by 281
Producing jet fuel from biomass lignin: Potential pathways to alkyl-benzenes and cycloalkanes
Cheng, F., & Brewer, C. E. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.030 · Cited by 268
Nimmanwudipong, T., Runnebaum, R. C., Block, D. E., & Gates, B. C. (2011) · Energy & Fuels · doi:10.1021/ef200803d · Cited by 254
de Miguel Mercader, F., Groeneveld, M. J., Kersten, S. R. A., Geantet, C., Toussaint, G., Way, N. W. J., Schaverien, C. J., & Hogendoorn, K. J. A. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00523a · Cited by 218
Ye, Z., Zhang, L., Huang, Q., & Tan, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118085 · Cited by 95
Catalytic Hydrotreatment of algal biocrude from fast Hydrothermal Liquefaction
Patel, B., Arcelus-Arrillaga, P., Izadpanah, A., & Hellgardt, K. (2017) · Renewable Energy · doi:10.1016/j.renene.2016.09.056 · Cited by 84
Davtyan, D., Aghoyan, A., Aleksanyan, G., Ghazaryan, V., & Akopyan, A. (2026) · Energy & Fuels · doi:10.1021/acs.energyfuels.6c00573 · Cited by 2
Metadata
- Authors
- Elliott, D. C., & Hart, T. R.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-12
- Volume
- 23
- Issue
- 2
- Pages
- 631-637
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2032900483
- Cited by
- 367
- References
- 2
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.