CoChat

Breaking of Water-in-Crude-Oil Emulsions. 3. Influence of Salinity and Water−Oil Ratio on Demulsifier Action

Borges, Belsay, Rondón, Miguel, Sereno, Onelys, Asuaje, Juan · 2009 · Energy & Fuels
Cited by 87

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

The stability of water-in-diluted-crude-oil emulsions is found to depend upon the water-phase salinity and the water−oil ratio for different asphaltene and demulsifier concentrations. It is reported that the most stable emulsions are formed when one of the phase volumes largely exceeds the other and that the minimum stability is found at the formulation for which the emulsion inversion takes place. For asphaltene concentrations over 500 ppm, this occurs at a volumetric fraction between 0.3 and 0.7 and, in this range, the higher the water-phase content, the lower the required demulsifier concentration. It is also determined that there is an optimum value of the demulsifier concentration that promotes the fastest separation. At a fixed asphaltene concentration, an increase in salinity generally leads to a lower demulsifier requirement. Finally, at higher asphaltene concentrations, simultaneous increases in salinity and demulsifier concentration are required to attain an optimal rate of emulsion breaking.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef8008822

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Cited by

See all 87

Metadata

Authors
Borges, B., Rondón, M., Sereno, O., & Asuaje, J.
Venue
Energy & Fuels
Published
2009-02-27
Volume
23
Issue
3
Pages
1568-1574
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2091727716
Cited by
87
References
2
FWCI
3.40
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Breaking of Water-in-Crude-Oil Emulsions. 3. Influence of Salinity and Water−Oil Ratio on Demulsifier Action. https://app.cochat.ai/papers/10.1021/ef8008822
The paper
Borges, B., Rondón, M., Sereno, O., & Asuaje, J. (2009). Breaking of Water-in-Crude-Oil Emulsions. 3. Influence of Salinity and Water−Oil Ratio on Demulsifier Action. Energy & Fuels. https://doi.org/10.1021/ef8008822

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.