The DOI matches its Crossref record.
Investigation of Ash Sintering during Combustion of Agricultural Residues and the Effect of Additives
Abstract
In the process of creating sustainable heat and power production systems it is important to find alternative, renewable fuels that are carbon dioxide neutral. Preferably these fuels should be domestic, thus diminishing the need for transportation. One option could be to use existing residues from local agriculture and food production. Development of combustion methods suitable for such residues is presently being pursued by a number of companies. Because many biomass fuels have compositions that makes them inclined to cause ash sintering problems and emissions of acid gases, there may be a need for the use of additives to decrease such problems. The aim of this work was to examine the ash characteristics of some agricultural crops and residues and to find mixtures of fuels and additives that can form the basis for production of fuel pellets with minimal problems. The work is focused on biomass fuel pellets for small-scale grate-fired combustors. Three additives (limestone powder, kaolin, and sodium bicarbonate) were investigated regarding their effects on the ash melting behavior. The results show that calcium carbonate and kaolin both serve as good additives to prevent the formation of slag. The best antislagging effect was achieved when both additives were used. Sodium bicarbonate can be used as a sulfur binding additive, but this cannot be recommended since it increases the slag formation considerably. The conclusion is that combustion of agricultural crops and residues may be hampered by problems such as slag formation and ash fouling. However, through the use of suitable additives, the ash sintering characteristics can be improved significantly. This means that agricultural residues can be competitive fuels on the energy market in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Niu, Y., Tan, H., & Hui, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.09.003 · Cited by 1,069
Wang, L., Hustad, J. E., Skreiberg, Ø., Skjevrak, G., & Grønli, M. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.03.004 · Cited by 314
Ash Deposition in Biomass Combustion or Co-Firing for Power/Heat Generation
Shao, Y., Wang, J., Preto, F., Zhu, J., & Xu, C. (2012) · Energies · doi:10.3390/en5125171 · Cited by 178
Anukam, A. I., Goso, B. P., Okoh, O. O., & Mamphweli, S. N. (2017) · Journal of Chemistry · doi:10.1155/2017/6478389 · Cited by 100
Recent advances in fluidized bed technology in biomass processes
Fouilland, T., Grace, J. R., & Ellis, N. (2010) · Biofuels · doi:10.4155/bfs.10.20 · Cited by 43
Metadata
- Authors
- Steenari, B.-M., Lundberg, A., Pettersson, H., Wilewska-Bien, M., & Andersson, D.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-19
- Volume
- 23
- Issue
- 11
- Pages
- 5655-5662
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1986459047
- Cited by
- 192
- References
- 0
- FWCI
- 4.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation of Ash Sintering during Combustion of Agricultural Residues and the Effect of Additives. https://app.cochat.ai/papers/10.1021/ef900471u
- The paper
- Steenari, B.-M., Lundberg, A., Pettersson, H., Wilewska-Bien, M., & Andersson, D. (2009). Investigation of Ash Sintering during Combustion of Agricultural Residues and the Effect of Additives. Energy & Fuels. https://doi.org/10.1021/ef900471u
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.