Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 268

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.

Release of Inorganic Constituents from Leached Biomass during Thermal Conversion

Dayton, D. C., Jenkins, B. M., Turn, S. Q., Bakker, R. R., Williams, R. B., Belle-Oudry, D., Hill, L. M.·1999·Energy & Fuels

Abstract

Leaching of inorganic materials has recently been shown to substantially improve the combustion properties of biomass fuels, especially straw but including other herbaceous and woody fuels. Leaching with water removes large fractions of alkali metals (typically >80% of potassium and sodium) and chlorine (>90%). Smaller fractions of sulfur and phosphorus are also removed. Alkali metals are heavily involved in ash fouling and slagging in combustion and thermal gasification systems. Chlorine is a facilitator of alkali volatilization, and contributes to corrosion and air pollution. The presence of these elements has reduced or eliminated the use of certain biomass fuels in many combustion applications, even where such use might provide significant environmental benefits. Leaching could mitigate the undesirable effects of biomass ash in thermal systems. Reported here for the first time are comparative studies of volatile inorganic species evolving from leached and unleached biomass fuels during thermal conversion. Leached and unleached samples of rice straw, wheat straw, switchgrass, commercial power plant wood fuel, and banagrass ( Pennisetum purpureum ) were tested in bench-scale combustion studies using an alumina-tube flow reactor housed in a variable temperature furnace and coupled to a molecular beam mass spectrometer (MBMS) system. Sugarcane bagasse, as the leached byproduct of sugar production, was also tested. The MBMS system was used to monitor the combustion products, including inorganic vapors, directly and in real time during each batch combustion event. Total relative amounts of HCl(g), SO 2 (g), NaCl(g), KCl(g), and other species were compared for leached and unleached samples. The MBMS results were consistent with the levels of alkali metals and chlorine in the samples as determined from the proximate, ultimate, and ash analyses of the samples. The more alkali and chlorine in a given sample, the more gas-phase HCl, KCl, and NaCl detected with the MBMS during combustion of that particular sample. The MBMS results clearly support earlier results, which indicated that leaching biomass effectively reduces or eliminates the release of alkali metal vapors during combustion.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef980256e

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 268

Metadata

Authors
Dayton, D. C., Jenkins, B. M., Turn, S. Q., Bakker, R. R., Williams, R. B., Belle-Oudry, D., & Hill, L. M.
Venue
Energy & Fuels
Published
1999-04-28
Volume
13
Issue
4
Pages
860-870
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2060224982
Cited by
268
References
13
FWCI
3.85
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.