The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Release of Inorganic Constituents from Leached Biomass during Thermal Conversion
Abstract
Leaching of inorganic materials has recently been shown to substantially improve the combustion properties of biomass fuels, especially straw but including other herbaceous and woody fuels. Leaching with water removes large fractions of alkali metals (typically >80% of potassium and sodium) and chlorine (>90%). Smaller fractions of sulfur and phosphorus are also removed. Alkali metals are heavily involved in ash fouling and slagging in combustion and thermal gasification systems. Chlorine is a facilitator of alkali volatilization, and contributes to corrosion and air pollution. The presence of these elements has reduced or eliminated the use of certain biomass fuels in many combustion applications, even where such use might provide significant environmental benefits. Leaching could mitigate the undesirable effects of biomass ash in thermal systems. Reported here for the first time are comparative studies of volatile inorganic species evolving from leached and unleached biomass fuels during thermal conversion. Leached and unleached samples of rice straw, wheat straw, switchgrass, commercial power plant wood fuel, and banagrass ( Pennisetum purpureum ) were tested in bench-scale combustion studies using an alumina-tube flow reactor housed in a variable temperature furnace and coupled to a molecular beam mass spectrometer (MBMS) system. Sugarcane bagasse, as the leached byproduct of sugar production, was also tested. The MBMS system was used to monitor the combustion products, including inorganic vapors, directly and in real time during each batch combustion event. Total relative amounts of HCl(g), SO 2 (g), NaCl(g), KCl(g), and other species were compared for leached and unleached samples. The MBMS results were consistent with the levels of alkali metals and chlorine in the samples as determined from the proximate, ultimate, and ash analyses of the samples. The more alkali and chlorine in a given sample, the more gas-phase HCl, KCl, and NaCl detected with the MBMS during combustion of that particular sample. The MBMS results clearly support earlier results, which indicated that leaching biomass effectively reduces or eliminates the release of alkali metal vapors during combustion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Mineral Nutrition of Higher Plants.
Martin, M. H., & Marschner, H. (1988) · The Journal of Ecology · doi:10.2307/2260650 · Cited by 5,489
Combustion properties of biomass
Jenkins, B. M., Baxter, L. L., Miles, T. R., & Miles, T. R. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00059-3 · Cited by 1,938
Self-citationDevelopments in Thermochemical Biomass Conversion: Volume 1 / Volume 2
(1997) · Springer eBooks · doi:10.1007/978-94-009-1559-6 · Cited by 644
Ash deposition during biomass and coal combustion: A mechanistic approach
Baxter, L. L. (1993) · Biomass and Bioenergy · doi:10.1016/0961-9534(93)90031-x · Cited by 429
Boiler deposits from firing biomass fuels
Miles, T. R., Miles, T. R., Baxter, L. L., Bryers, R. W., Jenkins, B. M., & Oden, L. L. (1996) · Biomass and Bioenergy · doi:10.1016/0961-9534(95)00067-4 · Cited by 420
Self-citationOn the properties of washed straw
Jenkins, B. M., Bakker, R. R., & Wei, J. B. (1996) · Biomass and Bioenergy · doi:10.1016/0961-9534(95)00058-5 · Cited by 382
Self-citationMineral Impurities in Coal Combustion
Chandra, D. (1986) · Journal of the Geological Society of India · Cited by 374
Dayton, D. C., French, R. J., & Milne, T. A. (1995) · Energy & Fuels · doi:10.1021/ef00053a018 · Cited by 220
Self-citationBurvall, J. (1997) · Biomass and Bioenergy · doi:10.1016/s0961-9534(96)00064-5 · Cited by 176
Properties of Danish biofuels and the requirements for power production
Sander, B. (1997) · Biomass and Bioenergy · doi:10.1016/s0961-9534(96)00072-4 · Cited by 167
Cited by
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Niu, Y., Tan, H., & Hui, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.09.003 · Cited by 1,069
Fates of Chemical Elements in Biomass during Its Pyrolysis
Liu, W.-J., Li, W.-W., Jiang, H., & Yu, H.-Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00647 · Cited by 614
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Vassilev, S. V., Baxter, D., & Vassileva, C. G. (2013) · Fuel · doi:10.1016/j.fuel.2013.05.043 · Cited by 494
Ash Transformation Chemistry during Combustion of Biomass
Boström, D., Skoglund, N., Grimm, A., Boman, C., Öhman, M., Broström, M., & Backman, R. (2012) · Energy & Fuels · doi:10.1021/ef201205b · Cited by 440
Switchgrass for bioethanol and other value-added applications: A review
Keshwani, D. R., & Cheng, J. J. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.09.035 · Cited by 424
Ash contents and ash-forming elements of biomass and their significance for solid biofuel combustion
Vassilev, S. V., Vassileva, C. G., Song, Y.-C., Li, W.-Y., & Feng, J. (2017) · Fuel · doi:10.1016/j.fuel.2017.07.036 · Cited by 417
Release of K, Cl, and S during pyrolysis and combustion of high-chlorine biomass
Johansen, J. M., Jakobsen, J. G., Frandsen, F. J., & Glarborg, P. (2011) · Energy & Fuels · doi:10.1021/ef201098n · Cited by 386
Ma, W., Wenga, T., Frandsen, F. J., Yan, B., & Chen, G. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100789 · Cited by 275
The effects of fuel washing techniques on alkali release from biomass
Davidsson, K. O., Korsgren, J. G., Pettersson, J. B. C., & Jäglid, U. (2002) · Fuel · doi:10.1016/s0016-2361(01)00132-6 · Cited by 265
Mechanisms and mitigation of agglomeration during fluidized bed combustion of biomass: A review
Morris, J. D., Daood, S. S., Chilton, S., & Nimmo, W. (2018) · Fuel · doi:10.1016/j.fuel.2018.04.098 · Cited by 170
Metadata
- Authors
- Dayton, D. C., Jenkins, B. M., Turn, S. Q., Bakker, R. R., Williams, R. B., Belle-Oudry, D., & Hill, L. M.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-04-28
- Volume
- 13
- Issue
- 4
- Pages
- 860-870
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2060224982
- Cited by
- 268
- References
- 13
- FWCI
- 3.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.