The DOI matches its Crossref record.
Sewage Sludge-Derived Materials as Efficient Adsorbents for Removal of Hydrogen Sulfide
Abstract
Sewage sludge-derived materials were used as adsorbents of hydrogen sulfide from moist air. The adsorbent obtained by carbonization at 950 degrees C has a capacity twice of that of coconut-shell-based activated carbon. The capacity of the sludge-derived materials increases with increasing carbonization temperature. It is likelythatduring carbonization at 950 degrees C a mineral-like phase is formed that consists of such catalytically active metals as iron, zinc, and copper. The results obtained demonstrate that the presence of iron oxide significantly increases the capacity of commercial carbon and activated alumina. The sludge-derived adsorbents are efficient for hydrogen sulfide removal until the pore entrances are blocked with sulfur as the product of oxidation reaction. For materials in which the catalytic effect is predominant, hydrogen sulfide is adsorbed until all pores are filled with sulfur. There is also indication that chemisorption plays a significant role in the removal of hydrogen sulfide from moist air.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Sewage sludge pyrolysis for liquid production: A review
Fonts, I., Gea, G., Azuara, M., Ábrego, J., & Arauzo, J. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.070 · Cited by 592
Biochar for crop production: potential benefits and risks
Hussain, M., Farooq, M., Nawaz, A., Al-Sadi, A. M., Solaiman, Z. M., Alghamdi, S. S., Ammara, U., Ok, Y. S., & Siddique, K. H. M. (2017) · Journal of Soils and Sediments · doi:10.1007/s11368-016-1360-2 · Cited by 532
Smith, K. M., Fowler, G. D., Pullket, S., & Graham, N. J. D. (2009) · Water Research · doi:10.1016/j.watres.2009.02.038 · Cited by 518
Castaldi, S., Riondino, M., Baronti, S., Esposito, F. R., Marzaioli, R., Rutigliano, F. A., Vaccari, F. P., & Miglietta, F. (2011) · Chemosphere · doi:10.1016/j.chemosphere.2011.08.031 · Cited by 338
Martin, M. J., Artola, A., Balaguer, M. D., & Rigola, M. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(03)00054-8 · Cited by 337
Nano-rod Ca-decorated sludge derived carbon for removal of phosphorus
Kong, L., Han, M., Shih, K., Su, M., Diao, Z., Long, J., Chen, D., Hou, L., & Peng, Y. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2017.10.099 · Cited by 86
Ahmad, F., Daud, W. M. A. W., Ahmad, M. A., & Radzi, R. (2013) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.01.003 · Cited by 59
Metadata
- Authors
- Bagreev, A., Bashkova, S., Locke, D. C., & Bandosz, T. J.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-03-02
- Volume
- 35
- Issue
- 7
- Pages
- 1537-1543
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1967048826
- Cited by
- 202
- References
- 0
- FWCI
- 20.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.