The DOI matches its Crossref record.
Effects of Sulfur Impregnation Temperature on the Properties and Mercury Adsorption Capacities of Activated Carbon Fibers (ACFs)
Abstract
Laboratory studies were conducted to determine the role of sulfur functional groups and micropore surface area of carbon-based adsorbents on the adsorption of Hg0 from simulated coal combustion flue gases. In this study, raw activated carbon fibers that are microporous (ACF-20) were impregnated with elemental sulfur between 250 and 650 degrees C. The resulting samples were saturated with respect to sulfur content. Total sulfur content of the sulfur impregnated ACF samples decreased with increasing impregnation temperatures from 250 and 500 degrees C and then remained constant to 650 degrees C. Results from sulfur K-edge X-ray absorption near-edge structure (S-XANES) spectroscopy showed that sulfur impregnated on the ACF samples was in both elemental and organic forms. As sulfur impregnation temperature increased, however, the relative amounts of elemental sulfur decreased with a concomitant increase in the amount of organic sulfur. Thermal analyses and mass spectrometry revealed that sulfur functional groups formed at higher impregnation temperatures were more thermally stable. In general, sulfur impregnation decreased surface area and increased equilibrium Hg0 adsorption capacity when compared to the raw ACF sample. The ACF sample treated with sulfur at 400 degrees C had a surface area of only 94 m2/g compared to the raw ACF sample's surface area of 1971 m2/g, but at least 86% of this sample's surface area existed as micropores and it had the largest equilibrium Hg0 adsorption capacities (2211-11,343 micrograms/g). Such a result indicates that 400 degrees C is potentially an optimal sulfur impregnation temperature for this ACF. Sulfur impregnated on the ACF that was treated at 400 degrees C was in both elemental and organic forms. Thermal analyses and CS2 extraction tests suggested that elemental sulfur was the main form of sulfur affecting the Hg0 adsorption capacity. These findings indicate that both the presence of elemental sulfur on the adsorbent and a microporous structure are important properties for improving the performance of carbon-based adsorbents for the removal of Hg0 from coal combustion flue gases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tuning selectivity of electrochemical reactions by atomically dispersed platinum catalyst
Choi, C. H., Kim, M., Kwon, H. C., Cho, S. J., Yun, S., Kim, H.-T., Mayrhofer, K. J. J., Kim, H., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms10922 · Cited by 849
Aqueous mercury adsorption by activated carbons
Hadi, P., To, M.-H., Hui, C.-W., Lin, C. S. K., & McKay, G. (2015) · Water Research · doi:10.1016/j.watres.2015.01.018 · Cited by 283
Sulfur‐Functionalized Mesoporous Carbon
Shin, Y., Fryxell, G. E., Um, W., Parker, K., Mattigod, S. V., & Skaggs, R. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601230 · Cited by 276
Subrahmanyam, K. S., Malliakas, C. D., Sarma, D., Armatas, G. S., Wu, J., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09110 · Cited by 193
Metadata
- Authors
- Hsi, H.-C., Rood, M. J., Rostam-Abadi, M., Chen, S., & Chang, R.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-05-18
- Volume
- 35
- Issue
- 13
- Pages
- 2785-2791
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2058650026
- Cited by
- 176
- References
- 0
- FWCI
- 11.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of Sulfur Impregnation Temperature on the Properties and Mercury Adsorption Capacities of Activated Carbon Fibers (ACFs). https://app.cochat.ai/papers/10.1021/es001794k
- The paper
- Hsi, H.-C., Rood, M. J., Rostam-Abadi, M., Chen, S., & Chang, R. (2001). Effects of Sulfur Impregnation Temperature on the Properties and Mercury Adsorption Capacities of Activated Carbon Fibers (ACFs). Environmental Science & Technology. https://doi.org/10.1021/es001794k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.