Effect of Molecular Scale Roughness of Glass Beads on Colloidal and Bacterial Deposition
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Molecular-scale surface roughness and charge heterogeneity have been hypothesized as factors that can affect the deposition rates of colloids during their transport in porous media. To test their relative importance, a single batch of cleaned glass beads was divided in half and chemically treated with acid or base to alter surface roughness. Analysis of the topography of 20 glass beads with an atomic force microscope (AFM) indicated that the chromic acid-treated (rough) beads had a root-mean-square roughness of 38.1 +/- 3.9 nm, while the sodium hydroxide-treated (smooth) beads had root-mean-square surface roughness of 15.0 +/- 1.9 nm. AFM force volume imaging of glass bead surfaces did not reveal surface charge heterogeneity. Filtration experiments with inorganic colloids (latex microspheres, 1 microm diameter) consistently demonstrated that there was a greater retention of latex microspheres on rough than smooth glass beads suspended in either low (10(-5) M) or higher (10(-1) M) ionic strength (IS) solutions. Collision efficiencies for rough beads were 30-50% larger than for smooth beads. Collision efficiencies of bacteria using rough glass beads were also equal to or greater than those measured for smooth beads. In experiments with the perchlorate-reducing bacterial isolate KJ, collision efficiencies were significantly greater on rough rather than smooth beads for two different ionic strength solutions (IS = 0.05 or 1 M). In another case (IS = 0.1 M) for KJ, and in filtration experiments with E coli, collision efficiencies were not significantly different between the rough and smooth beads. We hypothesize that the consistently greater deposition rates of microspheres, but not bacteria, on rough rather than smooth beads are due in part to the presence of polymers on the surfaces of bacteria.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The surface roughness of material spheres we evaluated here only included relatively smooth surfaced materials (<1 μm roughness)32, 33.”
From Size- and shape-dependent foreign body immune response to materials implanted in rodents and non-human primates (2015) · cites this paper as [33]
Citations
Cites
Direct measurement of colloidal forces using an atomic force microscope
Ducker, W. A., Senden, T. J., & Pashley, R. M. (1991) · Nature · doi:10.1038/353239a0 · Cited by 2,075
Cleveland, J. P., Manne, S., Bocek, D., & Hansma, P. K. (1993) · Review of Scientific Instruments · doi:10.1063/1.1144209 · Cited by 1,642
Trajectory analysis of deep‐bed filtration with the sphere‐in‐cell porous media model
Rajagopalan, R., & Tien, C. (1976) · AIChE Journal · doi:10.1002/aic.690220316 · Cited by 786
Elimelech, M., Zhu, X., Childress, A. E., & Hong, S. (1997) · Journal of Membrane Science · doi:10.1016/s0376-7388(96)00351-1 · Cited by 608
Kinetics of deposition of colloidal particles in porous media
Elimelech, M., & O'Melia, C. R. (1990) · Environmental Science & Technology · doi:10.1021/es00080a012 · Cited by 548
DLVO Interaction between Rough Surfaces
Bhattacharjee, S., Ko, C.-H., & Elimelech, M. (1998) · Langmuir · doi:10.1021/la971360b · Cited by 377
Physical and chemical factors influencing transport of microorganisms through porous media
Fontes, D. E., Mills, A. L., Hornberger, G. M., & Herman, J. S. (1991) · Applied and Environmental Microbiology · doi:10.1128/aem.57.9.2473-2481.1991 · Cited by 339
Dimension of weather and climate attractors
Lorenz, E. N. (1991) · Nature · doi:10.1038/353241a0 · Cited by 291
Probing Bacterial Electrosteric Interactions Using Atomic Force Microscopy
Camesano, T. A., & Logan, B. E. (2000) · Environmental Science & Technology · doi:10.1021/es9913176 · Cited by 263
Self-citationCamesano, T. A., & Logan, B. E. (1998) · Environmental Science & Technology · doi:10.1021/es970996m · Cited by 257
Self-citation
Research works printed but not linked: 15
- Gannon J. T., 1991, Appl. Environ. Microbiol., 57, 193
- Li Q., 1999, Water Res., 33, 1100
- DeFluan M. F., 1990, Appl. Environ. Microbiol., 56, 119
- Mills A. L., 1994, Appl. Environ. Microbiol., 60, 3306
- Johnson W. P., 1995, Water Resour. Res., 31, 2658
- Walz J. Y., 1998, J. Colloid Inter. Sci., 74, 168
- Zhu X., 1997, Environ. Sci. Technol., 31, 3662
- Liu A., 2000, Colloids Surf. A: Physicochem. Engin. Aspects, 174, 252
- Vigeant M. A. S., 1997, Appl. Environ. Microbiol., 63, 3479
- Mulvaney P. M. M.S., 2000, The Pennsylvania State University
- Logan B. E., 1995, J. Environ. Eng., 121, 873
- Yao K.-M., 1971, Environ. Sci. Technol., 5, 1112
- van Loosdrecht M. C. M., 1987, Appl. Environ. Microbiol., 53, 1901
- Amro N. A., 2000, Langmuir, 16, 2796
- Ong Y.-L., 1999, Langmuir, 15, 2725
Cited by
Veiseh, O., Doloff, J. C., Ma, M., Vegas, A. J., Tam, H. H., Bader, A. R., Li, J., Langan, E., Wyckoff, J., Loo, W. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4290 · Cited by 897
Bacterial adhesion to glass and metal-oxide surfaces
Li, B., & Logan, B. E. (2004) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2004.05.006 · Cited by 594
Self-citationBacterial Adhesion and Transport in Porous Media: Role of the Secondary Energy Minimum
Redman, J. A., Walker, S. L., & Elimelech, M. (2004) · Environmental Science & Technology · doi:10.1021/es034887l · Cited by 532
Liquefaction resistance of bio-cemented calcareous sand
Xiao, P., Liu, H., Xiao, Y., Stuedlein, A. W., & Evans, T. M. (2018) · Soil Dynamics and Earthquake Engineering · doi:10.1016/j.soildyn.2018.01.008 · Cited by 445
Predicting colloid transport through saturated porous media: A critical review
Molnar, I. L., Johnson, W. P., Gerhard, J. I., Willson, C. S., & O'Carroll, D. M. (2015) · Water Resources Research · doi:10.1002/2015wr017318 · Cited by 304
“…are too insensitive to reflect nanoscale to microscale heterogeneity [ Elimelech et al ., 2000], atomic force microscopy has limited resolution [ Shellenberger and Logan , 2002; Taboada-Serrano et al ., 2005; Drelich and Wang , 2011], and surface spectroscopic techniques do not yield…”
Background
Metadata
- Authors
- Shellenberger, K., & Logan, B. E.
- Affiliations
- Pennsylvania State University (US)
- Corresponding author
- Logan, Bruce E.
- ORCID
- Logan, Bruce E.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-12-13
- Volume
- 36
- Issue
- 2
- Pages
- 184-189
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1977534541
- Cited by
- 261
- References
- 38
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 6 · 2023: 6 · 2022: 6 · 2021: 5 · 2020: 11 · 2019: 22 · 2018: 10 · 2017: 12 · 2016: 6 · 2015: 19 · 2014: 14 · 2013: 14 · 2012: 19
- FWCI
- 10.99
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Science Foundation
- National Institutes of Health
- National Institute of Environmental Health Sciences (ES 04940, P42ES004940)
- Division of Chemistry
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Fecal contamination and water quality
- Physical Sciences › Environmental Science › Environmental Engineering › Groundwater flow and contamination studies
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Electrostatics and Colloid Interactions
- Keywords
- glass beads, colloidal deposition, bacterial deposition, surface charge heterogeneity, latex microspheres, collision efficiency, ionic strength, transport in porous media, perchlorate-reducing bacteria, Escherichia coli
- MeSH terms
- Bacteria, Bacterial Adhesion, Biodegradation, Environmental, Colloids, Equipment Design, Filtration, Glass, Polymers, Water Microbiology, Porosity, Water Purification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.