The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Role of Hydrodynamic Drag on Microsphere Deposition and Re-entrainment in Porous Media under Unfavorable Conditions
Abstract
Deposition and re-entrainment of 1.1 microm microspheres were examined in packed glass beads and quartz sand under both favorable and unfavorable conditions for deposition. Experiments were performed at environmentally relevant ionic strengths and flow rates in the absence of solution chemistry and flow perturbations. Numerical simulations of experimental data were performed using kinetic rate coefficients to represent deposition and re-entrainment dynamics. Deposition rate coefficients increased with increasing flow rate under favorable deposition conditions (in the absence of colloid-grain surface electrostatic repulsion), consistent with expected trends from filtration theory. In contrast, under unfavorable deposition conditions (where significant colloid-grain surface electrostatic repulsion exists), the deposition rate coefficients decreased with increasing flow rate, suggesting a mitigating effect of hydrodynamic drag on deposition. Furthermore, the re-entrainment rate was negligible under favorable conditions but was significant under unfavorable conditions and increased with increasing flow rate, demonstrating that hydrodynamic drag drove re-entrainment under unfavorable conditions. The drag torque resulting from hydrodynamic drag was found to be 1 order of magnitude or more lower than the adhesive torque based on pull-off forces from atomic force microscopy measurements. This result indicates that hydrodynamic drag was insufficient to drive re-entrainment of microspheres that were associated with the grain surface via the primary energy minimum and suggests that hydrodynamic drag drove re-entrainment of secondary-minimum-associated microspheres.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of Molecular Scale Roughness of Glass Beads on Colloidal and Bacterial Deposition
Shellenberger, K., & Logan, B. E. (2002) · Environmental Science & Technology · doi:10.1021/es015515k · Cited by 261
Cited by
Alimi, O. S., Farner Budarz, J., Hernandez, L. M., & Tufenkji, N. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05559 · Cited by 2,668
Coupling of physical and chemical mechanisms of colloid straining in saturated porous media
Bradford, S. A., Torkzaban, S., & Walker, S. L. (2007) · Water Research · doi:10.1016/j.watres.2007.03.030 · Cited by 412
Bradford, S. A., & Torkzaban, S. (2008) · Vadose Zone Journal · doi:10.2136/vzj2007.0092 · Cited by 364
Predicting colloid transport through saturated porous media: A critical review
Molnar, I. L., Johnson, W. P., Gerhard, J. I., Willson, C. S., & O'Carroll, D. M. (2015) · Water Resources Research · doi:10.1002/2015wr017318 · Cited by 304
Self-citationSignificance of straining in colloid deposition: Evidence and implications
Bradford, S. A., Simunek, J., Bettahar, M., van Genuchten, M. T., & Yates, S. R. (2006) · Water Resources Research · doi:10.1029/2005wr004791 · Cited by 304
Metadata
- Authors
- Li, X., Zhang, P., Lin, C. L., & Johnson, W. P.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-04-26
- Volume
- 39
- Issue
- 11
- Pages
- 4012-4020
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2014423355
- Cited by
- 177
- References
- 1
- FWCI
- 9.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.