The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Excess Colloid Retention in Porous Media as a Function of Colloid Size, Fluid Velocity, and Grain Angularity
Abstract
The deposition and re-entrainment behaviors of five sizes of carboxylate-modified microspheres (ranging from 0.1 to 2.0 microm) were examined both in porous media and impinging jet systems under a variety of environmentally relevant pore fluid velocities (2-8 m day-'), and in both the absence and the presence of an energy barrier to deposition. The magnitudes of the deposition efficiencies were compared among the porous media and impinging jet systems under equivalent fluid velocities, solution chemistries, and surface chemistries. The observed deposition efficiencies were factors of about 5 to 50 greater in the porous media relative to the impinging jet across the entire size range of microspheres examined, demonstrating that this excess deposition in porous media is relevant to a wide range of colloid sizes. The magnitude of excess deposition increased with increasing fluid velocity, and was greatest for the smallest colloids (0.1 microm). A range between 15% and 40% of the excess retained colloids were released upon introduction of low ionic strength solution, indicating that they were retained via secondary energy minima without direct contact with the grain surfaces. The observations indicate that pore geometry is a critical governor of colloid deposition in the presence of an energy barrier, even in porous media composed of spherical collectors. A portion of this excess deposition results from retention in flow stagnation zones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of Molecular Scale Roughness of Glass Beads on Colloidal and Bacterial Deposition
Shellenberger, K., & Logan, B. E. (2002) · Environmental Science & Technology · doi:10.1021/es015515k · Cited by 261
Cited by
Alimi, O. S., Farner Budarz, J., Hernandez, L. M., & Tufenkji, N. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05559 · Cited by 2,668
Microplastics in the soil environment: Occurrence, risks, interactions and fate – A review
Xu, B., Liu, F., Cryder, Z., Huang, D., Lu, Z., He, Y., Wang, H., Lu, Z., Brookes, P. C., Tang, C., et al. (2020) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2019.1694822 · Cited by 656
Predicting colloid transport through saturated porous media: A critical review
Molnar, I. L., Johnson, W. P., Gerhard, J. I., Willson, C. S., & O'Carroll, D. M. (2015) · Water Resources Research · doi:10.1002/2015wr017318 · Cited by 304
Self-citation
Metadata
- Authors
- Tong, M., & Johnson, W. P.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-11-10
- Volume
- 40
- Issue
- 24
- Pages
- 7725-7731
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2019838519
- Cited by
- 171
- References
- 1
- FWCI
- 7.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.