The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Arsenic Removal and Recovery from Copper Smelting Wastewater Using TiO2
Abstract
Removal and recovery of high levels of arsenic (As) in copper smelting wastewater present a great environmental challenge. A novel approach was investigated for the first time using TiO(2) for As adsorptive removal from wastewater and subsequent spent adsorbent regeneration and As recovery using NaOH. EXAFS results demonstrate that As(III), as the only As species present in the raw water, does not form an aqueous complex with other metal ions. An average of 3890 ± 142 mg/L As(III) at pH 1.4 in the wastewater was reduced to 59 ± 79 μg/L in the effluent with final pH at 7 in the 21 successive treatment cycles using regenerated TiO(2). Coexisting heavy metals including Cd, Cu, and Pb with concentrations at 369 mg/L, 24 mg/L, and 5 mg/L, respectively, were reduced to less than 0.02 mg/L. As(III) adsorption followed pseudosecond-order rate kinetics, and the adsorption behavior was described with the charge distribution multisite surface complexation model. Approximately 60% As(III) in the waste solution after the TiO(2) regeneration process was recovered by thermo vaporization and subsequent precipitation of sodium arsenite, as suggested by the EDX and XPS analysis. This "zero" sludge process sheds new light on successful As remediation technology for acidic metallurgical industry wastewater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of arsenic and sulphate from the copper smelting industrial effluent
Basha, C. A., Selvi, S. J., Ramasamy, E., & Chellammal, S. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.10.027 · Cited by 109
Cited by
Remediation of wastewater using various nano-materials
Anjum, M., Miandad, R., Waqas, M., Gehany, F., & Barakat, M. A. (2019) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2016.10.004 · Cited by 779
The role of nanomaterials as effective adsorbents and their applications in wastewater treatment
Sadegh, H., Ali, G. A. M., Gupta, V. K., Makhlouf, A. S. H., Shahryari-ghoshekandi, R., Nadagouda, M. N., Sillanpää, M., & Megiel, E. (2017) · Journal of Nanostructure in Chemistry · doi:10.1007/s40097-017-0219-4 · Cited by 639
Gopinath, K. P., Madhav, N. V., Krishnan, A., Malolan, R., & Rangarajan, G. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110906 · Cited by 449
Nanomaterials for removal of toxic elements from water
Lu, F., & Astruc, D. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.11.003 · Cited by 446
Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment
Jain, K., Patel, A. S., Pardhi, V. P., & Flora, S. J. S. (2021) · Molecules · doi:10.3390/molecules26061797 · Cited by 422
Inorganic nano-adsorbents for the removal of heavy metals and arsenic: a review
Zito, P., & Shipley, H. J. (2015) · RSC Advances · doi:10.1039/c5ra02714d · Cited by 416
Nanomaterials as Sorbents to Remove Heavy Metal Ions in Wastewater Treatment
Wang, X. (2012) · Journal of Environmental & Analytical Toxicology · doi:10.4172/2161-0525.1000154 · Cited by 324
Electrocoagulation treatment of arsenic in wastewaters: A comprehensive review
Song, P., Yang, Z., Zeng, G., Yang, X., Xu, H., Wang, L., Xu, R., Xiong, W., & Ahmad, K. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.02.086 · Cited by 314
Nanotechnology-based water quality management for wastewater treatment
Madhura, L., Singh, S., Kanchi, S., Sabela, M., Bisetty, K., & Inamuddin (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-018-0778-8 · Cited by 167
Anoob, F., Arachchi, S., Azamathulla, H. M., Al-mahbashi, N., & Rathnayake, U. (2024) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2024.100639 · Cited by 42
Metadata
- Authors
- Luo, T., Cui, J., Hu, S., Huang, Y., & Jing, C.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-11-05
- Volume
- 44
- Issue
- 23
- Pages
- 9094-9098
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1987831011
- Cited by
- 172
- References
- 1
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.