Measurement, Standards, and Data Needs for CO2 Capture Materials: A Critical Review
The DOI matches its Crossref record; 78 of the 79 references it cites were found in a registry or an index.
Abstract
The commercial deployment of cost-effective carbon capture technology is hindered partially by the lack of a proper suite of materials-related measurements, standards, and data, which would provide critical information for the systematic design, evaluation, and performance of CO2 separation materials. Based on a literature search and conversations with the carbon capture community, we review the current status of measurements, standards, and data for the three major carbon capture materials in use today: solvents, solid sorbents, and membranes. We highlight current measurement, standards and data activities aimed to advance the development and use of carbon capture materials and major research needs that are critical to meet if innovation in carbon capture materials is to be achieved. The review reveals that although adsorbents are considered to have great potential to reduce carbon capture cost, there is no consensus on the experimental parameters to be used for evaluating sorbent properties. Another important finding is the lack of in situ experimental tools for the structural characterization of solid porous materials during CO2 adsorption, and computational methods that would enable a materials-by-design approach for their development.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“generally, gas adsorption onto the porous carbons has a lower heat of adsorption than other sorbents [17], which nominates this adsorbent as an excellent candidate for cyclic adsorption processes [46].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [46]
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Climate and atmospheric history of the past 420,000 years from the Vostok ice core, Antarctica
Petit, J. R., Jouzel, J., Raynaud, D., Barkov, N. I., Barnola, J.-M., Basile, I., Bender, M., Chappellaz, J., Davis, M., Delaygue, G., et al. (1999) · Nature · doi:10.1038/20859 · Cited by 6,508
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Robeson, L. M. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.04.030 · Cited by 5,917
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Membrane Technology and Applications
Baker, R. W. (2004) · Wiley eBooks · doi:10.1002/0470020393 · Cited by 3,956
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Zeolite molecular sieves—Structure, chemistry and use
Pearce, H. A. (1975) · Journal of Chromatography A · doi:10.1016/s0021-9673(00)93871-8 · Cited by 2,104
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
Research works printed but not linked: 24
- Report of the Conference of the Parties on its fifteenth session, held in Copenhagen from 7 to 19 December 2009; Addendum; Part Two: Action taken by the Conference of the Parties at its fifteenth session. Copenhagen Accord; United Nations Framework Convention on Climate Change, p5.http://unfccc.int/resource/docs/2009/cop15/eng/11a01.pdf.
- 1992, Policy Implications of Greenhouse Warming:Mitigation, Adaptation, and the Science Base
- McCarthy R., 2012, Hearing on EPA Regulation of Greenhouse Gases. U.S. House of Representatives
- Rubin E. S., 2012, Prog. Energy Combust. Sci., 1
- Gallagher P., 2009, Hearing on Monitoring, Measurement and Verification of Greenhouse Gas Emissions II: The Role of Federal and Academic Research and Monitoring Programs
- D’Alessandro D. M., 2010, Angew. Chem., Int. Ed., 49, 35
- Shekhawat D., 2003, Report DOE/NETL-2003/1200, Department of Energy
- Kohl A. L., 1997, Gas Purification
- DOE/NETL, 2011, National Energy Technology Laboratory
- DOE/NETL, 2010, Department of Energy
- Ji, L.; Bonnin-Nartker, P.; Klidas, M. G.; Zhang, R.Solvent selection for commercial deployment of B&W PGG’s RSATTMCO2scrubbing process.The 35th International Technical Conference on Coal Utilization & Fuel Systems, Clearwater, Florida, US, 2010
- Minkkinen A., 1999, Technological Development in Sour Gas Processing, In Gas Cycling: A New Approach
- Herzog H., 2009, White Paper Prepared for the Clean Air Task Force
- Dubay, K., 2009, Center on Globalization, Governance, and Competitiveness, Duke University
- Carbon Dioxide Capture and Storage, Contribution of the Working Group III, Special Report of the Intergovernmental Panel on Climate Change,Cambridge, UK, 2005.
- Krutka, H. M., 2008, Power Plant Air Pollutant Control ″Mega″ Symposium
- Donatini F., 2004, Int. J. Thermodyn., 7, 123
- Siriwardane R., 2009, J. Environ. Eng. SPECIAL ISSUE: Recent Developments in CO2 Emission Control Technology, 135, 378
- Yi, C. K.; Jo, S. H.; Seo, Y. W.; Park, S. D.; Moon, K. H.; Yoo, J. S.; Lee, J. B.; Ryu, C. K., Feasibility Test for CO2Capture by Dry sorbents in Two Fluidized Bed Reactors (http://www.netl.doe.gov/publications/proceedings/05/carbon-seq/Tech%20Session%20Paper%20103.pdf).Fourth Annual Conference on Carbon Capture and Sequestration DOE/NETL, 2005.
- DOE-sponsored Workshop for CO2Capture Beyond 2020. 2010.
- Tong D. L., 2012, Int. J. Greenhouse Gas Control, 6
- Choi Y. S., 2010, Corrosion, 66
- Babic K., 2010, 9th Annual Conference on Carbon Capture & Sequestration
- Barillas, M.The CO2and H2permeance of membranes composed of highly CO2-philic polymers. In8th Annual Conference on Carbon Capture & Sequestration, Pittsburgh, PA, 2009.
Cited by
A general framework for the assessment of solar fuel technologies
Herron, J. A., Kim, J., Upadhye, A. A., Huber, G. W., & Maravelias, C. T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01958j · Cited by 347
Polymer nanocomposites for energy storage, energy saving, and anticorrosion
Yang, C., Wei, H., Guan, L., Guo, J., Wang, Y., Yan, X., Zhang, X., Wei, S., & Guo, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02707a · Cited by 246
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Wang, K., Huang, H., Liu, D., Wang, C., Li, J., & Zhong, C. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00425 · Cited by 204
Transition metal carbides as novel materials for CO2 capture, storage, and activation
Kunkel, C., Viñes, F., & Illas, F. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03649f · Cited by 183
Szulejko, J. E., Kim, K.-H., & Parise, J. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.11.001 · Cited by 159
Solar to fuels conversion technologies: a perspective
Tuller, H. L. (2017) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-017-0088-2 · Cited by 182
Zeolite-Based Sorbent for CO 2 Capture: Preparation and Performance Evaluation
Murge, P., Dinda, S., & Roy, S. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b02259 · Cited by 135
Microporous adsorbents for CO2 capture – a case for microporous polymers?
Xu, C., & Hedin, N. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.007 · Cited by 131
Liu, W., Dai, X., Wang, Y., Song, L., Zhang, L., Zhang, D., Xie, J., Chen, L., Diwu, J., Wang, J., et al. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b04728 · Cited by 119
Microbial Electrolytic Carbon Capture for Carbon Negative and Energy Positive Wastewater Treatment
Lü, L., Huang, Z. Z., Rau, G. H., & Ren, Z. J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b00875 · Cited by 120
Irani, V., Tavasoli, A., & Vahidi, M. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.05.018 · Cited by 100
Ludwinowicz, J., & Jaroniec, M. (2015) · Carbon · doi:10.1016/j.carbon.2015.07.052 · Cited by 101
Elbert, S. M., Röminger, F., & Mastalerz, M. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201404829 · Cited by 97
Interfacial Properties of Deep Eutectic Solvents Regarding to CO2 Capture
García, G., Atilhan, M., & Aparicio, S. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b04585 · Cited by 93
Zhang, P., Wang, J., Fan, W., Zhong, Y., Zhang, Y., Deng, Q., Zeng, Z., & Deng, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.121931 · Cited by 92
Phase-Change Ionic Liquids for Postcombustion CO2 Capture
Seo, S., Simoni, L. D., Ma, M., DeSilva, M. A., Huang, Y. P., Stadtherr, M. A., & Brennecke, J. F. (2014) · Energy & Fuels · doi:10.1021/ef501374x · Cited by 88
Nguyen, H. G. T., Espinal, L., van Zee, R. D., Thommes, M., Toman, B., Hudson, M. S. L., Mangano, E., Brandani, S., Broom, D. P., Benham, M. J., et al. (2018) · Adsorption · doi:10.1007/s10450-018-9958-x · Cited by 85
Self-citationKim, K., Szulejko, J. E., Raza, N., Kumar, V., Vikrant, K., Tsang, D. C. W., Bolan, N. S., Ok, Y. S., & Khan, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118408 · Cited by 88
Recent progress on submicron gas-selective polymeric membranes
Wang, M., Zhao, J., Wang, X., Liu, A., & Gleason, K. K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01862b · Cited by 87
Dai, J., Saayman, J., Grace, J. R., & Ellis, N. (2015) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061114-123310 · Cited by 91
A systemic review of hydrogen supply chain in energy transition
Ma, H., Sun, Z., Xue, Z., Zhang, C., & Chen, Z. (2023) · Frontiers in Energy · doi:10.1007/s11708-023-0861-0 · Cited by 90
Khan, A., Szulejko, J. E., Kim, K., Samaddar, P., Lee, S. S., Yang, X. L., & Ok, Y. S. (2018) · Environmental Research · doi:10.1016/j.envres.2018.09.019 · Cited by 80
Deng, B., Tang, J., Mao, X., Song, Y., Zhu, H., Xiao, W., & Wang, D. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b02955 · Cited by 80
Amiri, M., Shahhosseini, S., & Ghaemi, A. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b03303 · Cited by 76
Παπαδόπουλος, Α. Ι., Badr, S., Chremos, A., Forte, E., Zarogiannis, T., Seferlis, P., Papadokonstantakis, S., Galindo, A., Jackson, G., & Adjiman, C. S. (2016) · Molecular Systems Design & Engineering · doi:10.1039/c6me00049e · Cited by 74
Sáenz-Cavazos, P. A., Hunter‐Sellars, E., Iacomi, P., McIntyre, S. R., Danaci, D., & Williams, D. R. (2023) · Frontiers in Energy Research · doi:10.3389/fenrg.2023.1167043 · Cited by 72
“For instance, Espinal et al., underline insufficient materials-related 10.3389/fenrg.2023.1167043 measurements, standards and data on solid sorbents which is critical for understanding and evaluating the overall performance of an adsorption-based carbon capture process (Espinal et al., 2013).”
BackgroundInfluentialIrani, V., Tavasoli, A., Maleki, A., & Vahidi, M. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.01.120 · Cited by 67
Sneddon, G., Ganin, A. Y., & Yiu, H. H. P. (2015) · Energy Technology · doi:10.1002/ente.201402211 · Cited by 66
Microporous Polymer Networks for Carbon Capture Applications
López-Iglesias, B., Suárez‐García, F., Aguilar‐Lugo, C., Ortega, A. G., Bartolomé, C., Martínez‐Ilarduya, J. M., de la Campa, J. G., Lozano, Á. E., & Álvarez, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05854 · Cited by 68
Kabir, E., Raza, N., Kumar, V., Singh, J., Tsang, Y. F., Lim, D. K., Szulejko, J. E., & Kim, K. (2019) · Chem · doi:10.1016/j.chempr.2019.08.004 · Cited by 64
CO2 Sorption Durability of Zr-Modified Nano-CaO Sorbents with Cage-like Hollow Sphere Structure
Ping, H., & Wu, S. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01397 · Cited by 64
Capturing carbon dioxide as a polymer from natural gas
Hwang, C.-C., Tour, J. J., Kittrell, C., Espinal, L., Alemany, L. B., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms4961 · Cited by 53
Self-citationRetractedJafari, T., Moharreri, E., Toloueinia, P., Amin, A. S., Sahoo, S., Khakpash, N., Noshadi, I., Alpay, S. P., & Suib, S. L. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.03.004 · Cited by 51
Biase, E. D., & Sarkisov, L. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.056 · Cited by 53
Carbon dioxide storage within coal reservoirs: A comprehensive review
Hosseinzadeh, S., Haghighi, M., Salmachi, A., & Shokrollahi, A. (2024) · Geoenergy Science and Engineering · doi:10.1016/j.geoen.2024.213198 · Cited by 50
Szulejko, J. E., & Kim, K. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.115729 · Cited by 52
Phenylamino-, Phenoxy-, and Benzenesulfenyl-Linked Covalent Triazine Frameworks for CO2 Capture
Liao, C., Liang, Z., Liu, B., Chen, H., Wang, X., & Li, H. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c00155 · Cited by 48
Horikawa, T., Muguruma, T., Do, D. D., Sotowa, K., & Alcántara-Ávila, J. R. (2015) · Carbon · doi:10.1016/j.carbon.2015.08.034 · Cited by 47
Ghosh, S., & Ramaprabhu, S. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.06.022 · Cited by 47
Techno-economic analysis of carbon capture and utilization technologies and implications for China
Chang, Y., Gao, S., Ma, Q., Wei, Y., & Li, G. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114550 · Cited by 46
Fabián-Anguiano, J. A., Mendoza-Serrato, C. G., Gómez‐Yáñez, C., Zeifert, B., Ma, X., & Ortíz-Landeros, J. (2019) · Chemical Engineering Science · doi:10.1016/j.ces.2019.115250 · Cited by 45
A reference high-pressure CH4 adsorption isotherm for zeolite Y: results of an interlaboratory study
Nguyen, H. G. T., Sims, C. M., Toman, B., Horn, J. C., van Zee, R. D., Thommes, M., Ahmad, R., Denayer, J. F. M., Baron, G. V., Napolitano, E., et al. (2020) · Adsorption · doi:10.1007/s10450-020-00253-0 · Cited by 48
Nanomaterial-Based Sensors for Exhaled Breath Analysis: A Review
Velumani, M., Prasanth, A., Narasimman, S., Chandrasekhar, A., Sampson, S. A., Meher, S. R., Rajalingam, S., Rufus, E., & Alex, Z. C. (2022) · Coatings · doi:10.3390/coatings12121989 · Cited by 43
Blanco, M. V., Kohopää, K., Snigireva, I. I., & Cova, F. H. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.017 · Cited by 43
Mechanochemical carbon dioxide capture and conversion
Guan, R., Li, S., Li, C., Gu, J., Seo, J., Jang, B.-J., Kim, S.-H., Kim, J., Lim, H., Li, Q., et al. (2025) · Nature Nanotechnology · doi:10.1038/s41565-025-01949-6 · Cited by 41
“For solid adsorbent, achieving a CO 2 capture capacity of 3 mmol g −1 is required to compete with the industrially available method using amine solution adsorbents 30 .”
Enhanced gravimetric CO2 capacity and viscosity for ionic liquids with cyanopyrrolide anion
Brown, P., Gurkan, B., & Hatton, T. A. (2015) · AIChE Journal · doi:10.1002/aic.14819 · Cited by 39
Quesne, M. G., Roldán, A., de Leeuw, N. H., & Catlow, C. R. A. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp00924h · Cited by 39
Ansari, M., Hassan, A., Alam, A., & Das, N. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111242 · Cited by 36
Ranjan, P., Saptal, V. B., & Bera, J. K. (2022) · ChemSusChem · doi:10.1002/cssc.202201183 · Cited by 40
Reynolds, A., Verheyen, T. V., Adeloju, S. B. O., Chaffee, A. L., & Meuleman, E. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00713 · Cited by 35
A pH-Gradient Flow Cell for Converting Waste CO2 into Electricity
Kim, T., Logan, B. E., & Gorski, C. A. (2017) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.6b00467 · Cited by 37
Beni, F. A., & Shahrak, M. N. (2020) · Polyhedron · doi:10.1016/j.poly.2019.114338 · Cited by 34
Altamash, T., Haimour, T. S., Tarsad, M. A., Anaya, B., Ali, M. H., Aparício, S., & Atilhan, M. (2017) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.6b00833 · Cited by 34
Feroci, M., Chiarotto, I., Forte, G., Ciprioti, S. V., & Inesi, A. (2014) · ChemElectroChem · doi:10.1002/celc.201300269 · Cited by 33
[n]‐Oligourea‐Based Green Sorbents with Enhanced CO2 Sorption Capacity
Qaroush, A. K., Castillo, D., Troll, C., Abu‐Daabes, M. A., Alsyouri, H. M., Abu‐Surrah, A. S., & Rieger, B. (2015) · ChemSusChem · doi:10.1002/cssc.201402828 · Cited by 33
Künkel, C., Viñes, F., Ramírez, P. J., Rodríguez, J. A., & Illas, F. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b12227 · Cited by 32
Solid adsorbents for carbon dioxide capture: a review
Rashid, H., & Rafey, A. (2023) · Chemistry and Ecology · doi:10.1080/02757540.2023.2227622 · Cited by 34
“less corrosive, rapid reaction rate with CO2, and less regeneration energy [9].”
BackgroundFeroci, M., Chiarotto, I., & Inesi, A. (2016) · Catalysts · doi:10.3390/catal6110178 · Cited by 33
“If the increase in CO2 emissions continues at this rate, within the next two decades global carbon dioxide cumulative emissions will reach levels that will make it impossible to hold the increase in global temperature below 2 ◦C every year [59].”
BackgroundKumari, M., Vega, F., Fernández, L. M. G., Shadangi, K. P., & Kumar, N. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.122288 · Cited by 30
Measuring heat capacity of activated carbons for CO2 capture
Querejeta, N., García, S., Álvarez-Gutiérrez, N., Rubiera, F., & Pevida, C. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.05.018 · Cited by 37
Flexible metal-organic framework compounds: In situ studies for selective CO2 capture
Allen, A. J., Espinal, L., Wong-Ng, W., Queen, W. L., Brown, C. M., Kline, S. R., Kauffman, K. L., Culp, J. T., & Matranga, C. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.148 · Cited by 29
Self-citationAshirov, T., Song, K. S., & Coşkun, A. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c00035 · Cited by 27
Riascos-Rodríguez, K., Schroeder, A. J., Arend, M. R., Evans, P. G., & Hernández‐Maldonado, A. J. (2014) · Dalton Transactions · doi:10.1039/c4dt00878b · Cited by 27
Ma, Q., Qi, Y., Li, J., Wang, W., & Sun, X. (2017) · Applied Organometallic Chemistry · doi:10.1002/aoc.3935 · Cited by 27
Hydrogen and CO2 storage in high surface area covalent triazine–based frameworks
Deng, Q., Ren, G., Li, Y.-J., Yang, L., Zhai, S., Yu, T., Sun, L., Deng, W., Li, A., & Zhou, Y.-H. (2020) · Materials Today Energy · doi:10.1016/j.mtener.2020.100506 · Cited by 26
Maleki, A., Irani, V., Tavasoli, A., & Vahidi, M. (2018) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2018.04.032 · Cited by 26
“Also in the past few years, successful designs have been made for functional sorbents by amine (D'Alessandro et al., 2010; Davarpanah et al., 2015; Espinal et al., 2013; Gargiulo et al., 2014; Gunathilake et al., 2016; Navaee and Salimi, 2015; Torrisi et al., 2010; Zhang et al., 2014b).”
BackgroundTeng, X., Wu, Q., Chen, S., & Deng, M. (2015) · RSC Advances · doi:10.1039/c5ra02182k · Cited by 26
Nguyen, H. G. T., Horn, J. C., Thommes, M., van Zee, R. D., & Espinal, L. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa8f83 · Cited by 25
“Adsorbents are promising candidates for carbon dioxide capture [1, 2], methane and hydrogen storage [3–7], gas separation [8], and catalysis [9] via the adsorption, or enrichment, of the gas (i.”
BackgroundSelf-citationSingh, J., Gupta, A., Zhu, Z., Tiwari, S. K., & Dhaliwal, A. S. (2026) · Materials Advances · doi:10.1039/d5ma01408e · Cited by 25
Wang, T., Jiang, L.-L., Zhang, Y., Wu, L., Chen, H., & Li, C. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.119653 · Cited by 24
Liu, H., Wang, S., Wang, X., Feng, X., & Chen, S. (2022) · Energy · doi:10.1016/j.energy.2022.124899 · Cited by 24
Mg‐Ion Inversion in MgO@MgO−Al2O3 Oxides: The Origin of Basic Sites
Hiremath, V., Kwon, H. J., Jung, I., Kwon, S., Kwon, S. H., Lee, S. G., Lee, H. C., & Seo, J. G. (2019) · ChemSusChem · doi:10.1002/cssc.201900072 · Cited by 23
Prud’homme, A., & Nabki, F. (2020) · Sensors · doi:10.3390/s20071824 · Cited by 24
“, the measurement of CO2 concentration has become a critical factor in increasing process efficiency and reducing environmental impact [1,2].”
BackgroundEnhancing carbon dioxide capture under humid conditions by optimizing the pore surface structure
Zhang, G., Xie, F., Ullah, S., Ma, L.-L., Teat, S. J., Ma, S., Thonhauser, T., Tan, K., Wang, H., & Li, J. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta06019a · Cited by 22
Fratalocchi, L., & Rossini, S. A. (2025) · Applied Catalysis A General · doi:10.1016/j.apcata.2025.120660 · Cited by 24
Querejeta, N., Gil, M. V., Rubiera, F., & Pevida, C. (2023) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.2210 · Cited by 28
Ortega‐Lugo, R., Fabián-Anguiano, J. A., Ovalle-Encinia, O., Gómez-Yánez, C., Zeifert, B., & Ortíz-Landeros, J. (2020) · Journal of Advanced Ceramics · doi:10.1007/s40145-019-0352-2 · Cited by 22
Interrogating the Carbon and Oxygen K-Edge NEXAFS of a CO2-Dosed Hyperbranched Aminosilica
Espinal, L., Green, M. L., Fischer, D. A., DeLongchamp, D. M., Jaye, C., Horn, J. C., Sakwa‐Novak, M. A., Chaikittisilp, W., Brunelli, N. A., & Jones, C. W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502483v · Cited by 21
Self-citationSimultaneous CO 2 and SO 2 capture by using ionic liquids: a theoretical approach
García, G., Atilhan, M., & Aparício, S. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp08151g · Cited by 21
Role of hydrogen bond capacity of solvents in reactions of amines with CO2: A computational study
Wang, T., Xie, H., Song, Z., Niu, J., Chen, D., Xia, D., & Chen, J. (2020) · Journal of Environmental Sciences · doi:10.1016/j.jes.2020.01.019 · Cited by 21
Lakhi, K. S., Park, D., Joseph, S., Talapaneni, S. N., Ravon, U., Albahily, K., & Vinu, A. (2017) · Chemistry - An Asian Journal · doi:10.1002/asia.201601707 · Cited by 22
Aly, E., Zafanelli, L. F. A. S., Henrique, A., Pires, M. G., Rodrigues, A. E., Gleichmann, K., & Silva, J. A. C. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02261 · Cited by 19
Moreton, J. C., Krishna, R., van Baten, J. M., Fylstra, N., Chen, M., Carr, T., Fielder, K., Chan, K., Shimizu, G. K. H., & Yamamoto, S. Y. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c02812 · Cited by 18
Lee, H., & Yavuz, C. T. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.04.019 · Cited by 18
López, M., Broderick, L., Carey, J. J., Viñes, F., Nolan, M., & Illas, F. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp03648a · Cited by 18
A triptycene derived hypercrosslinked polymer for gas capture and separation applications
Ansari, M., Bera, R., & Das, N. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51449 · Cited by 17
A means to an interface: investigating monoethanolamine behavior at an aqueous surface
McWilliams, L. E., Valley, N. A., Wren, S. N., & Richmond, G. L. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp02931g · Cited by 17
Ghawanmeh, A. A., Tanash, S. A., Al‐Rawashdeh, N. A. F., & Albiss, B. A. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09680-8 · Cited by 17
“Nanomaterials possess a high surface-to-volume ratio, nanoscale material, and excellence electronic or ionic charge-carrying properties, which make it easily to be merged into devices to create advanced chemosensors platforms [37, 38].”
Mirzaei, S., Shamiri, A., & Aroua, M. K. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b01230 · Cited by 16
Li, W., Wen, S., Shen, L., Zhang, Y., Sun, C., & Li, S. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02612 · Cited by 16
Zhang, Y., Zhang, Y., Wang, L., Jiang, H. F., & Xiong, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b00331 · Cited by 16
Ambient Carbon Dioxide Capture Using Boron-Rich Porous Boron Nitride: A Theoretical Study
Li, L., Liu, Y., Yang, X., Yu, X., Fang, Y. W., Li, Q., Jin, P., & Tang, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01106 · Cited by 16
Surface Activity of Early Transition-Metal Oxycarbides: CO2 Adsorption Case Study
Künkel, C., Viñes, F., & Illas, F. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b11942 · Cited by 15
Vidal‐Vidal, A., Faza, O. N., & López, C. S. (2017) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.7b09394 · Cited by 16
Ansari, M., & Das, N. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100723 · Cited by 14
Wang, T., Zhang, K., Du, S.-W., Wu, L., Li, C., Chen, H., & Guo, H. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147280 · Cited by 16
López, M., Viñes, F., Nolan, M., & Illas, F. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c03893 · Cited by 14
Zhang, G., Xie, F., Popp, T. M. O., Patel, A. R., Morales, E. M. C., Tan, K., Crichton, R. A., Hall, G. S., Zhang, J., Nieuwkoop, A. J., et al. (2023) · CrystEngComm · doi:10.1039/d2ce01633h · Cited by 14
Effect of canopy structures on CO2 capture capacity and properties of NONMs
Qu, P., Zheng, Y., Yang, R., Li, D., Fan, W., & Lu, Y. (2015) · Colloid & Polymer Science · doi:10.1007/s00396-015-3537-4 · Cited by 13
“Global emissions rate of carbon dioxide has increased year by year in the past decade, and global emissions reached 34 billion tons in 2011 [1].”
Background
Metadata
- Authors
- Espinal, L., Poster, D. L., Wong-Ng, W., Allen, A. J., & Green, M. L.
- Affiliations
- National Institute of Standards and Technology (US)
- Corresponding author
- Espinal, Laura
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-10-21
- Volume
- 47
- Issue
- 21
- Pages
- 11960-11975
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2330224843
- Cited by
- 161
- References
- 79
- Citations by year
- 2026: 5 · 2025: 10 · 2024: 12 · 2023: 14 · 2022: 11 · 2021: 7 · 2020: 12 · 2019: 12 · 2018: 19 · 2017: 16 · 2016: 11 · 2015: 23 · 2014: 9
- FWCI
- 2.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Inorganic Chemistry › Metal-Organic Frameworks: Synthesis and Applications
- Keywords
- CO2 capture, carbon capture materials, measurement standards, materials data, solid sorbents, in situ structural analysis, porous media, materials by design, CO2 adsorption
- MeSH terms
- Adsorption, Air Pollutants, Air Pollution, Carbon Dioxide, Manufactured Materials, Membranes, Artificial, Solvents, Government Regulation, Carbon Sequestration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.