The DOI matches its Crossref record.
PM10 and PM2.5 and Health Risk Assessment for Heavy Metals in a Typical Factory for Cathode Ray Tube Television Recycling
Abstract
The representative waste television recycling process was chosen as the object of this study, including manual dismantling and mechanical separation of printed circuit boards (PCBs) and cathode ray tubes (CRTs) in two independent workshops. During these recycling processes, fine particulate matter and heavy metals will be released into the air to impact the environment and the health of the workers. The mass concentrations of PM2.5 (particles below 2.5 μm diameter) in mechanical and dismantling workshops ranged from 252.6 to 290.8 μg/m(3) and from 112.7 to 169.4 μg/m(3), respectively. The average concentration of PM2.5 around the workshop was 98.5 μg/m(3). Meanwhile, the contents of PM10 (particles below 10 μm diameter) were all below the risk threshold, except that (360.4 μg/m(3)) monitored in the mechanical workshop. In two workshops, Pb (20.46 and 6.935 mg/g) was the most enriched metal in the PM2.5 samples, while in PM10, the concentration of Cu (27.76 and 31.80 mg/g) was the largest. The concentration of Cd was the least in both PM10 and PM2.5. Health risk assessment showed that the total hazard indexes for non-carcinogenic metal in PM2.5 monitored in mechanical and dismantling workshops and in the southeast of the workshops were 7.61, 3.01, and 1.57, respectively, all above the safety level. Furthermore, Pb (7.28 and 3.01) might possibly have a non-carcinogenic effect on the workers in two workshops, and the sequence of the hazard quotient (HQ) through the three exposure ways was ingestion > dermal contact > inhalation. The lifetime cancer risk of four targeted metals was Cr > Ni > Pb > Cd, which could be proven in all monitoring samples. This study aims to provide a large amount of valid data for the State Environmental Protection Department to develop relevant environmental standards and for companies to improve the waste television recycling system to be more efficiently and environmentally friendly.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Environmental pollution of electronic waste recycling in India: A critical review
Awasthi, A. K., Zeng, X., & Li, J. (2016) · Environmental Pollution · doi:10.1016/j.envpol.2015.11.027 · Cited by 375
“Fang et al. (2013) estimated that, during these recycling processes, dust containing heavy metals will be released into the air to impact the environment and the health of the engaged unprotected workers.”
BackgroundResultInfluentialEnvironmental and health impacts due to e-waste disposal in China – A review
Li, W., & Achal, V. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.139745 · Cited by 318
Song, Q., & Li, J. (2014) · Waste Management · doi:10.1016/j.wasman.2014.08.012 · Cited by 269
Hoang, A. Q., Tue, N. M., Tu, M. B., Suzuki, G., Matsukami, H., Tuyen, L. H., Viet, P. H., Kunisue, T., Sakai, S.-I., & Takahashi, S. (2023) · Environmental Geochemistry and Health · doi:10.1007/s10653-022-01408-4 · Cited by 40
Metadata
- Authors
- Fang, W., Yang, Y., & Xu, Z.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-10-16
- Volume
- 47
- Issue
- 21
- Pages
- 12469-12476
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1973956643
- Cited by
- 186
- References
- 0
- FWCI
- 18.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: PM10 and PM2.5 and Health Risk Assessment for Heavy Metals in a Typical Factory for Cathode Ray Tube Television Recycling. https://app.cochat.ai/papers/10.1021/es4026613
- The paper
- Fang, W., Yang, Y., & Xu, Z. (2013). PM10 and PM2.5 and Health Risk Assessment for Heavy Metals in a Typical Factory for Cathode Ray Tube Television Recycling. Environmental Science & Technology. https://doi.org/10.1021/es4026613
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.