The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Lost by Design
Abstract
In some common uses metals are lost by intent-copper in brake pads, zinc in tires, and germanium in retained catalyst applications being examples. In other common uses, metals are incorporated into products in ways for which no viable recycling approaches exist, examples include selenium in colored glass and vanadium in pigments. To determine quantitatively the scope of these "losses by design", we have assessed the major uses of 56 metals and metalloids, assigning each use to one of three categories: in-use dissipation, currently unrecyclable when discarded, or potentially recyclable when discarded. In-use dissipation affects fewer than a dozen elements (including mercury and arsenic), but the spectrum of elements dissipated increases rapidly if applications from which they are currently unrecyclable are considered. In many cases the resulting dissipation rates are higher than 50%. Among others, specialty metals (e.g., gallium, indium, and thallium) and some heavy rare earth elements are representative of modern technology, and their loss provides a measure of the degree of unsustainability in the contemporary use of materials and products. Even where uses are currently compatible with recycling technologies and approaches, end of life recycling rates are in most cases well below those that are potentially achievable. The outcomes of this research provide guidance in identifying product design approaches for reducing material losses so as to increase element recovery at end-of-life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
What Do We Know About Metal Recycling Rates?
Graedel, T. E., Allwood, J., Birat, J.-P., Buchert, M., Hagelüken, C., Reck, B. K., Sibley, S. F., & Sonnemann, G. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00342.x · Cited by 43
Self-citation
Cited by
Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms
den Hollander, M. C., Bakker, C. A., & Hultink, E. J. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12610 · Cited by 736
Contributions of sociometabolic research to sustainability science
Haberl, H., Wiedenhofer, D., Pauliuk, S., Krausmann, F., Müller, D. B., & Fischer-Kowalski, M. (2019) · Nature Sustainability · doi:10.1038/s41893-019-0225-2 · Cited by 358
Supply risks associated with lithium-ion battery materials
Helbig, C., Bradshaw, A. M., Wietschel, L., Thorenz, A., & Tuma, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.122 · Cited by 341
Mayer, A., Haas, W., Wiedenhofer, D., Krausmann, F., Nuss, P., & Blengini, G. A. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12809 · Cited by 339
Resource Demand Scenarios for the Major Metals
Elshkaki, A., Graedel, T. E., Ciacci, L., & Reck, B. K. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05154 · Cited by 271
Self-citation
Metadata
- Authors
- Ciacci, L., Reck, B. K., Nassar, N. T., & Graedel, T. E.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-04
- Volume
- 49
- Issue
- 16
- Pages
- 9443-9451
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2329868229
- Cited by
- 202
- References
- 1
- FWCI
- 17.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.