The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Asphalt Modified with Nonmetals Separated from Pulverized Waste Printed Circuit Boards
Abstract
Nonmetals separated from pulverized waste printed circuit boards (PCBs) were reused as a new modifier to improve the performance of asphalt. The classical and rheological properties of unmodified asphalt and non-metal-modified asphalt (NMA) were determined. Specifically, the influence of nonmetals content and particle size on these properties has been studied. When the nonmetals content was 25 wt% and the particle size group was 0.07-0.09 mm, the NMA had a viscosity of 1225 cP at 135 degrees C, a penetration of 53.7 dmm at 15 degrees C, a ring and ball softening point of 54 degrees C, a ductility of 43.5 cm at 15 degrees C, a G*/sin delta of 3995.27 Pa at 60 degrees C, and an upper limit temperature (G*/sin delta = 1 kPa) of 69.4 degrees C, all of which showed that the high temperature performance of asphalt was improved significantly. Therefore, this study gives a fundamental understanding of NMA and represents a novel attempt to deal with the fast increasing quantities of nonmetals from waste PCBs, which is significant from an environmental and economic standpoint.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“one of the greater challenges affecting the efficacy of nanomaterial legislation is identification of the presence of nanomaterials in products to determine whether the nanomaterial definition as recommended by the EU is applicable, and, as such, is specific legislation applicable [95].”
From Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use (2019) · cites this paper as [95]
Citations
Cites
Mechanical recycling of waste electric and electronic equipment: a review
Cui, J., & Forssberg, E. (2003) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(03)00061-x · Cited by 1,136
Leung, A. O. W., Luksemburg, W. J., Wong, A. S., & Wong, M. H. (2007) · Environmental Science & Technology · doi:10.1021/es0625935 · Cited by 555
Recycle Technology for Recovering Resources and Products from Waste Printed Circuit Boards
Li, J., Lu, H., Guo, J., Xu, Z., & Zhou, Y. (2007) · Environmental Science & Technology · doi:10.1021/es0618245 · Cited by 483
Self-citationRheological evaluation of ethylene vinyl acetate polymer modified bitumens
Airey, G. D. (2002) · Construction and Building Materials · doi:10.1016/s0950-0618(02)00103-4 · Cited by 442
Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen
Şengöz, B., & Isikyakar, G. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.07.013 · Cited by 389
Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy
Veit, H. M., Bernardes, A. M., Ferreira, J. Z., Tenório, J. A. S., & Malfatti, C. D. F. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.05.010 · Cited by 315
Severe PCDD/F and PBDD/F Pollution in Air around an Electronic Waste Dismantling Area in China
Li, H., Yu, L., Sheng, G., Fu, J., & Peng, P. (2007) · Environmental Science & Technology · doi:10.1021/es0702925 · Cited by 308
Use of Black Diagrams to Identify Inconsistencies in Rheological Data
Airey, G. D. (2002) · Road Materials and Pavement Design · doi:10.1080/14680629.2002.9689933 · Cited by 298
Printed circuit board recycling: a state-of-the-art survey
Li, J., Shrivastava, P., Gao, Z., & Zhang, H. (2004) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2004.830501 · Cited by 198
Zheng, Y., Shen, Z., Cai, C., Ma, S., & Xing, Y. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.07.008 · Cited by 170
Characterization of bitumens modified with SEBS, EVA and EBA polymers
Isacsson, U., & Lu, X. (1999) · Journal of Materials Science · doi:10.1023/a:1004636329521 · Cited by 154
Rheological characteristics of ground tire rubber-modified bitumens
Navarro, F. J., Partal, P., Martínez-Boza, F. J., Valencia, C., & Gallegos, C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00023-2 · Cited by 138
Characteristics of elastomeric and plastomeric binders in contact with natural asphalts
Widyatmoko, I., & Elliott, R. C. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.12.025 · Cited by 133
Rheological characteristics of synthetic road binders
Airey, G. D., Mohammed, M. H., & Fichter, C. (2008) · Fuel · doi:10.1016/j.fuel.2008.01.012 · Cited by 125
A Plate Produced by Nonmetallic Materials of Pulverized Waste Printed Circuit Boards
Guo, J., Cao, B., Guo, J., & Xu, Z. (2008) · Environmental Science & Technology · doi:10.1021/es800825u · Cited by 76
Self-citationPhenolic Molding Compound Filled with Nonmetals of Waste PCBs
Guo, J., Li, J., Rao, Q., & Xu, Z. (2007) · Environmental Science & Technology · doi:10.1021/es0712930 · Cited by 73
Self-citationUse of softwood bark charcoal as a modifier for road bitumen
Chebil, S., Chaala, A., & Roy, C. (2000) · Fuel · doi:10.1016/s0016-2361(99)00196-9 · Cited by 71
Recycling of epoxy resin compounds for moulding electronic components
Iji, M. (1998) · Journal of Materials Science · doi:10.1023/a:1004329209623 · Cited by 38
Cited by
Sorted by citations
Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use
Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A. (2019) · Materials · doi:10.3390/ma12193052 · Cited by 348
Waste printed circuit board recycling techniques and product utilization
Hadi, P., Xu, M., Lin, C. S. K., Hui, C. W., & McKay, G. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.032 · Cited by 347
A new technology for recycling materials from waste printed circuit boards
Zhou, Y., & Qiu, K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.083 · Cited by 324
Wang, J., & Xu, Z. (2014) · Environmental Science & Technology · doi:10.1021/es504833y · Cited by 226
Self-citationThe toxicity and valorization options of cigarette butts
Kurmus, H., & Mohajerani, A. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.011 · Cited by 147
Metadata
- Authors
- Guo, J., Guo, J., Wang, S., & Xu, Z.
- Affiliations
- Shanghai Jiao Tong University (CN)
- Corresponding author
- Xu, Zhenming
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-12
- Volume
- 43
- Issue
- 2
- Pages
- 503-508
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1964948775
- Cited by
- 69
- References
- 18
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 4 · 2023: 5 · 2022: 9 · 2021: 4 · 2020: 4 · 2019: 4 · 2018: 4 · 2017: 4 · 2016: 5 · 2015: 2 · 2014: 7 · 2013: 3 · 2012: 3
- FWCI
- 9.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Asphalt Pavement Performance Evaluation
- Physical Sciences › Environmental Science › Waste Management and Disposal › Recycling and Waste Management Techniques
- Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
- Keywords
- asphalt modification, waste printed circuit boards, rheological properties, high-temperature performance, particle size effects, viscosity, penetration, softening point, ductility, complex modulus, waste recycling
- MeSH terms
- Electronics, Hydrocarbons, Metals, Particle Size, Rheology, Temperature, Viscosity, Waste Products
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
