Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use
Open accessThe DOI matches its Crossref record; 91 of the 95 references it cites were found in a registry or an index; 22 of the 155 sources its claims cite were checked for support.
Abstract
Nanoparticles are defined as ultrafine particles sized between 1 and 100 nanometres in diameter. In recent decades, there has been wide scientific research on the various uses of nanoparticles in construction, electronics, manufacturing, cosmetics, and medicine. The advantages of using nanoparticles in construction are immense, promising extraordinary physical and chemical properties for modified construction materials. Among the many different types of nanoparticles, titanium dioxide, carbon nanotubes, silica, copper, clay, and aluminium oxide are the most widely used nanoparticles in the construction sector. The promise of nanoparticles as observed in construction is reflected in other adoptive industries, driving the growth in demand and production quantity at an exorbitant rate. The objective of this study was to analyse the use of nanoparticles within the construction industry to exemplify the benefits of nanoparticle applications and to address the short-term and long-term effects of nanoparticles on the environment and human health within the microcosm of industry so that the findings may be generalised. The benefits of nanoparticle utilisation are demonstrated through specific applications in common materials, particularly in normal concrete, asphalt concrete, bricks, timber, and steel. In addition, the paper addresses the potential benefits and safety barriers for using nanomaterials, with consideration given to key areas of knowledge associated with exposure to nanoparticles that may have implications for health and environmental safety. The field of nanotechnology is considered rather young compared to established industries, thus limiting the time for research and risk analysis. Nevertheless, it is pertinent that research and regulation precede the widespread adoption of potentially harmful particles to mitigate undue risk.
Overview
CoChat Summary
## TL;DR
This is a narrative review of nanoparticles in construction materials, showing that they can improve properties of concrete, asphalt, bricks, timber, and steel while also raising health, environmental, and regulatory concerns. The paper argues that research and regulation have not kept pace with nanoparticle use, especially for exposure, disposal, and incidental nanoparticle generation.
## Key findings
- In concrete, nano-silica improved particle packing, increased cement hydration, reduced setting time and porosity, and increased early strength; nano-titania (TiO2) enabled self-cleaning/self-disinfecting effects, and carbon nanotubes improved pore filling and durability.
- In asphalt concrete, a 5% inclusion of nano-aluminium oxide (Al2O3) showed strong resistance to high temperatures, and nanoparticle modifiers were reported to greatly improve serviceability.
- In bricks, a 5% inclusion of nano-clay increased compressive strength to 4.8 times that of normal clay bricks; alkosiloxane with 1%–1.5% silica nanoparticles was reported as the most effective protective coating.
- The review reports several exposure and risk figures: 2012 voluntary production data showed TiO2 at 10,000 t/y, other common nanoparticles at 100–1000 t/y; Australia had an estimated 5,489.3 tonnes of tyre rubber released in 2016, with up to 549 tonnes as airborne PM10; the paper also cites a study in which 97% of 149 watershed sediment samples contained nanoparticles.
## Methods
- Narrative literature review of research on nanomaterials in construction materials, with attention to future research needs for industry adoption.
- Sources were taken from peer-reviewed journals, textbooks, and government publications; the review emphasized environmental and human health impacts, recycling of waste nanomaterials, and adoption barriers.
- Main analysis was a thematic synthesis across nanoparticle definitions, construction applications, environmental/social/economic benefits, risk assessment, health implications, environmental implications, and regulation.
## Limitations
- The paper states that limited scientific evidence exists to support or deny implementation of nanotechnology in construction, and that limited research is available on long-term environmental and human health effects.
- It also states that regulation and exposure information are incomplete or inconsistent, with minimal regulatory guidelines in some areas and limited understanding of long-term release and life-cycle exposure.
- Evident from the text: this is a review rather than a new empirical study, so its conclusions depend on the scope and quality of the cited literature.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
Verification
Claims the paper makes
13 Valid · 8 Not valid · 126 Not checked · 52 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“A study of 149 sediment samples collected from watersheds in the USA, France, and Japan demonstrated a 97% detection rate, with values ranging from <14–5800 ppm in dry weight.”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 8. Environmental Implications
What the sources say
- Disputedcites [90] Moerman, 2011, Analysis of metals leached from smoked cigarette litter, Tob. Control. sourceExperimental — accuracy not yet measured
The Methods section describes testing metal leachates from smoked cigarette butts and unsmoked cigarettes in aqueous solutions, not sediment samples collected from watersheds. The Results section reports concentrations in those leachates; it does not report the claimed 149 samples, 97% detection rate, or <14–5800 ppm dry-weight range. Page numbers are unavailable in our copy. (LLM, conf=0.85)
Checked by a reasoning model — may be wrong.
boostedn = 149- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, a significant part of tyre and brake wear PM10 lies in the fine size fraction [28].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 2. Nanoparticle Definitions > 2.3. Incidental Nanoparticles
What the sources say
- Partly supportedcites [28] Grigoratos, T., and Martini, G. (2014). Non-exhaust traffic related emissions. Brake and tyre wear PM, JRC Science and Policy Reports. Jt. Res. Cent. sourceExperimental — accuracy not yet measured
The 'Brake wear particle mass distribution' section reports that substantial brake-wear mass falls within PM2.5, supporting the brake-wear part of the claim. The passages about tyres do not establish what fraction of tyre-wear PM10 is fine, so that part is unsupported by our copy (page numbers unavailable). (LLM, conf=0.87)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“It may cause failure of the hot mix asphalt layers due to the infiltration of water in the pavement structure. This can cause a loss of stiffness, durability, and strength [41,42].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 4. Nanoparticles in Construction Materials > 4.2. Asphalt Concrete
What the sources say
- Not checked — no full text of the sourcecites [41] Nejad, 2012, Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt, Constr. Build. Mater. source
- Could not verifycites [42] Jin, J., Chen, B., Liu, L., Liu, R., Qian, G., Wei, H., and Zheng, J. (2019). A Study on Modified Bitumen with Metal Doped Nano-TiO2 Pillared Montmorillonite. Materials, 12. sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses pavement problems associated with bitumen’s rheological performance and aging resistance, while the Methods and Results passages address high-temperature behavior and UV aging. Searches for moisture damage, water infiltration, and loss of stiffness, durability, or strength found no passage addressing the claimed mechanism. (LLM, conf=0.72)
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
Every source the paper cites for this claim was checked and supports it.
In the paper
“The results show that a 5% inclusion of nano-clay can develop a compressive strength 4.8 times that of normal clay bricks [46].”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 4. Nanoparticles in Construction Materials > 4.3. Bricks
What the sources say
- Supportedcites [46] Niroumand, 2013, The Influence of Nano-clays on Compressive Strength of Earth Bricks as Sustainable Materials, Procedia-Soc. Behav. Sci. source
Section 3.2 states that the tested earth bricks contained 5% nano-clay, and Table 1 gives the corresponding mixture. The Conclusion reports compressive strength 4.8 times that of normal earth bricks; the 14-day values in Section 3.2 are consistent with that ratio. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Inflammation was evidenced by increased polymorphonuclear leukocytes (PMN), macrophages, and lymphocytes”
§ Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use > 7. Health Implications > 7.1. Pulmonary Exposure
What the sources say
- Partly supportedcites [84] Gillespie, 2010, Pulmonary response after exposure to inhaled nickel hydroxide nanoparticles: short and long-term studies in mice, Nanotoxicology sourceExperimental — accuracy not yet measured
The Results (Biological Response; page not available) report significantly increased neutrophil (PMN) and lymphocyte populations after three and five months of exposure. Macrophages were counted, and a marker of their phagocytic activity increased after five months, but the passages do not report an increase in macrophage numbers. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
89 more claims · 7 with their cited sources checked
Create a free account to see all 199 claims and to verify the 33 references still open.
- Probably not a substantial claim. 47
- It may state two separate claims as one. 75
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Self-check results appear here once an independent check has confirmed them.
Cited works that were retracted
Works this paper cites that were later retracted, from the retraction notices publishers deposit. Major when the notice came out before this paper was published.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“Hong, 2017, Retracted: Chronic nasal exposure to nanoparticulate TiO2 causes pulmonary tumorigenesis in male mice, Environ. Toxicol., 32, 1651, 10.1002/tox.22393”
Cited work 10.1002/tox.22393 · retracted 2018-10-15 · notice 10.1002/tox.22667 · this paper published 2019-09-20
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“Supplementary cementitious materials are generally added in the manufacturing of concrete as a replacement for more expensive clinker, and chemical admixtures are added for specific applications to enhance the properties of concrete [15].”
Cited work 10.1016/j.enbuild.2011.02.018 · retracted 2019-07-01 · notice 10.1016/j.enbuild.2011.02.018 · this paper published 2019-09-20
Citations
Cites
2 retracted
RETRACTED: Al2O3 nanoparticles in concrete and different curing media
Nazari, A., & Riahi, S. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.02.018 · Cited by 145 · cited 2×
“Supplementary cementitious materials are generally added in the manufacturing of concrete as a replacement for more expensive clinker, and chemical admixtures are added for specific applications to enhance the properties of concrete [15].”
BackgroundRetractedHong, F., Ji, L., Zhou, Y., & Wang, L. (2017) · Environmental Toxicology · doi:10.1002/tox.22393 · Cited by 11
RetractedNanotechnology in the real world: Redeveloping the nanomaterial consumer products inventory
Vance, M. E., Kuiken, T., Vejerano, E. P., McGinnis, S. P., Hochella, M. F., Rejeski, D., & Hull, M. S. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.181 · Cited by 1,785
Karlsson, H. L., Cronholm, P., Gustafsson, J., & Möller, L. (2008) · Chemical Research in Toxicology · doi:10.1021/tx800064j · Cited by 1,480
Sustainability in the construction industry: A review of recent developments based on LCA
Ortiz, O., Castells, F., & Sonnemann, G. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.11.012 · Cited by 1,340 · cited 1×
“These are the issues that need to be considered when choosing materials for projects, which stem from the idea of whole life cycle costing in an effort to promote sustainable development and reduce the wastage of materials across the entire life of the structure [16].”
BackgroundSilver nanoparticle applications and human health
Ahamed, M., AlSalhi, M. S., & Siddiqui, M. K. J. (2010) · Clinica Chimica Acta · doi:10.1016/j.cca.2010.08.016 · Cited by 1,298
Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world
Piccinno, F., Gottschalk, F., Seeger, S., & Nowack, B. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1109-9 · Cited by 1,280 · cited 3×
“Available data on nanoparticle production is scarcely available, with companies unwilling to provide information regarding production volumes or production capacities [25].”
BackgroundInfluentialIn vitro toxicity of silica nanoparticles in human lung cancer cells
Lin, W., Huang, Y.-W., Zhou, X.-D., & Ma, Y. (2006) · Toxicology and Applied Pharmacology · doi:10.1016/j.taap.2006.10.004 · Cited by 852
Lee, J., Mahendra, S., & Alvarez, P. J. J. (2010) · ACS Nano · doi:10.1021/nn100866w · Cited by 750 · cited 2×
“Once nanomaterials are released into the environment they may experience distinctive chemical, biological, and physical transformations, which may result in a change in their properties [8].”
BackgroundKonsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.007 · Cited by 683 · cited 2×
“The addition of CNTs to concrete can make concrete impenetrable to salts and water, therefore significantly enhancing the durability properties of concrete [35].”
Background
Research works printed but not linked: 6
- Rae, 2006, Real life applications of nanotechnology in electronics, OnBoard Technol., 2006, 28
- Strambeanu, N., Demetrovici, L., and Dragos, D. (2015). Nanoparticles’ Promises and Risks: Characterization Manipulation, Potential Hazards to Humanity the Environment, Springer.
- Khitab, 2014, Nano construction materials, Adv. Mater. Sci., 38, 181
- Lee, J., Mahendra, S., Alvarez, P., Bittnar, Z., Bartos, P.J., and Němeček, J. (2009). Nanotechnology in Construction 3: Proceedings of the NICOM3, Springer.
- Marianne, G. (2017). Cellulose Plastics. Brydson’s Plastics Materials, Elsevier.
- Veiseh, 2003, The use of polystyrene in lightweight brick production Iranian, Polym. J., 12, 323
Cited by
Ali, M. H., Azad, M. A. K., Khan, K. A., Rahman, M. O., Chakma, U., & Kumer, A. (2023) · ACS Omega · doi:10.1021/acsomega.3c01261 · Cited by 317
Potential Natural Fiber Polymeric Nanobiocomposites: A Review
Hasan, K. M. F., Horváth, P. G., & Alpár, T. (2020) · Polymers · doi:10.3390/polym12051072 · Cited by 244
Onaizi, A. M., Huseien, G. F., Lim, N. H. A. S., Amran, M., & Samadi, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124850 · Cited by 202
Mishra, T., Mandal, P., Rout, A. K., & Sahoo, D. (2022) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2022.100298 · Cited by 181
Principles of green chemistry: building a sustainable future
Kurul, F., Doruk, B., & Topkaya, S. N. (2025) · Discover Chemistry · doi:10.1007/s44371-025-00152-9 · Cited by 185
“Nanoparticles are utilized in a wide range of fields, including materials and manufacturing [80], environmental and energy sectors [81], and the textile industry [82], where they enhance strength, durability, and functional properties.”
Metadata
- Authors
- Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A.
- Affiliations
- RMIT University (AU)
- Swinburne University of Technology (AU)
- Suranaree University of Technology (TH)
- Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia (UTHM), Batu Pahat 86400, Johor, Malaysia
- Corresponding author
- Mohajerani, Abbas
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-09-20
- Volume
- 12
- Issue
- 19
- Pages
- 3052
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC6804222
- OpenAlex
- W2973574987
- Semantic Scholar
- d48655bed2cb6fe97f2fe8f3e610ebc4048a8b6b
- Cited by
- 348
- References
- 95
- Citations by year
- 2026: 27 · 2025: 73 · 2024: 75 · 2023: 58 · 2022: 56 · 2021: 42 · 2020: 17
- FWCI
- 2.31
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- RMIT Research Repository (RMIT University Library) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Figshare (submittedVersion, cc-by)
- Swinburne figshare (Swinburne University of Technology) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Materials Science › General Materials Science › Nanotechnology research and applications
- Physical Sciences › Materials Science › Materials Chemistry › Nanoparticles: synthesis and applications
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Keywords
- nanoparticles, building materials, nanomaterials, titanium dioxide, carbon nanotubes, silica nanoparticles, nanoclay, Al2O3 nanoparticles, concrete, asphalt mixtures, brick, timber, steel, environmental risk, human health risk, nanoparticle exposure, nanotechnology regulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use. https://app.cochat.ai/papers/10.3390/ma12193052
- The paper
- Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A. (2019). Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use. Materials. https://doi.org/10.3390/ma12193052
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
![Figure 1 SEM micrographs of plain (A) and nano-silica modified cement paste (B) [32].](https://figures.cochat.ai/paper-figures/a77f45bc16c346e5a69da1d5d040abd7/nanoparticles-in-construction-materials-and-other-applications-and-implications-figure-1.jpg)