The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation of Activated Carbon by Chemical Activation under Vacuum
Abstract
Activated carbons especially used for gaseous adsorption were prepared from Chinesefir sawdust by zinc chloride activation under vacuum condition. The micropore structure, adsorption properties, and surface morphology of activated carbons obtained under atmosphere and vacuum were investigated. The prepared activated carbons were characterized by SEM, FTIR, and nitrogen adsorption. It was found that the structure of the starting material is kept after activation. The activated carbon prepared under vacuum exhibited higher values of the BET surface area (up to 1079 m2 g(-1)) and total pore volume (up to 0.5665 cm3 g(-1)) than those of the activated carbon obtained under atmosphere. This was attributed to the effect of vacuum condition that reduces oxygen in the system and limits the secondary reaction of the organic vapor. The prepared activated carbon has well-developed microstructure and high microporosity. According to the data obtained, Chinese fir sawdust is a suitable precursor for activated carbon preparation. The obtained activated carbon could be used as a low-cost adsorbent with favorable surface properties. Compared with the traditional chemical activation, vacuum condition demands less energy consumption, simultaneity, and biomass-oil is collected in the procedure more conveniently. FTIR analysis showed that heat treatment would result in the aromatization of the carbon structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cleaner production of carbon adsorbents by utilizing agricultural waste corn cob
Tsai, W. T., Chang, C. Y., Wang, S. Y., Chang, C. F., Chien, S. F., & Sun, H. F. (2001) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(00)00093-8 · Cited by 153
Cited by
Danish, M., & Ahmad, T. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.02.003 · Cited by 807
Review on the physicochemical treatments of rice husk for production of advanced materials
Soltani, N., Bahrami, A., Pech-Canul, M. I., & González, L. A. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.056 · Cited by 629
Biomass-derived renewable carbon materials for electrochemical energy storage
Gao, Z., Zhang, Y., Song, N., & Li, X. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1250834 · Cited by 551
Towards Textile Energy Storage from Cotton T‐Shirts
Bao, L., & Li, X. (2012) · Advanced Materials · doi:10.1002/adma.201200246 · Cited by 516
Chromium removal from water by activated carbon developed from waste rubber tires
Gupta, V. K., Ali, I., Saleh, T. A., Siddiqui, M. N., & Agarwal, S. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-012-0950-9 · Cited by 429
Dural, M. U., Cavas, L., Papageorgiou, S. K., & Katsaros, F. K. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.12.038 · Cited by 362
Liang, W., Wang, G., Peng, C., Tan, J., Wan, J., Sun, P., Li, Q., Ji, X., Zhang, Q., Wu, Y., et al. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127993 · Cited by 264
Metadata
- Authors
- Juan, Y., & Ke-qiang, Q.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-03-23
- Volume
- 43
- Issue
- 9
- Pages
- 3385-3390
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1987802157
- Cited by
- 162
- References
- 1
- FWCI
- 7.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.