The DOI matches its Crossref record.
Complete Heavy Metal Removal from Fly Ash by Heat Treatment: Influence of Chlorides on Evaporation Rates
Open accessAbstract
Thermal treatment is a promising way for the decontamination and inertization of residues from waste incineration. The evaporation of heavy metal compounds thereby is of great significance. It is the goal of this work to identify, by analyzing evaporation rates, the predominant thermochemical reactions of the heavy metals with other constituents of fly ash, with respect to volatilization. To this end, experiments were performed with fly ash from a municipal solid waste (MSW) incineration plant as well as with synthetic powder mixtures in the temperature range of 670−1000 °C. The rates of Cd, Cu, Pb, and Zn evaporation can be described accurately by a simple first-order rate law and a rate coefficient which itself follows an exponential temperature dependence analogous to the Arrhenius equation. The degrees (completeness) as well as the rates of evaporation of the heavy metals are markedly influenced by chlorides contained in the fly ash, largely as NaCl. Experiments with model substrates indicate that the heavy metals Zn and Cu in fly ash, which are the least volatile among the group investigated, are predominantly present as chlorides. Their evaporation is completed by shifting the oxide/chloride equilibrium if surplus chlorine, e.g., in the form of NaCl, is available. The heavy metal evaporations are probably limited by reactions that form heavy metal silica/alumina compounds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Clay mineral adsorbents for heavy metal removal from wastewater: a review
Gu, S., Kang, X., Wang, L., Lichtfouse, E., & Wang, C. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-018-0813-9 · Cited by 523
Treatment and use of air pollution control residues from MSW incineration: An overview
Quina, M. J., Bordado, J. C., & Quinta-Ferreira, R. M. (2008) · Waste Management · doi:10.1016/j.wasman.2007.08.030 · Cited by 404
Thermochemical treatment of sewage sludge ashes for phosphorus recovery
Adam, C., Peplinski, B., Michaelis, M., Kley, G., & Simon, F.-G. (2009) · Waste Management · doi:10.1016/j.wasman.2008.09.011 · Cited by 384
Ma, W., Wenga, T., Frandsen, F. J., Yan, B., & Chen, G. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100789 · Cited by 275
Lievens, C., Yperman, J., Vangronsveld, J., & Carleer, R. (2008) · Fuel · doi:10.1016/j.fuel.2007.10.021 · Cited by 131
Effect of Chlorine and Sulfur on Fine Particle Formation in Pilot-Scale CFBC of Biomass
Lind, T., Kauppinen, E. I., Hokkinen, J., Jokiniemi, J. K., Orjala, M., Aurela, M., & Hillamo, R. (2006) · Energy & Fuels · doi:10.1021/ef050122i · Cited by 55
Metadata
- Authors
- Jakob, A., Stucki, S., & Struis, R. P. W. J.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 1996-10-01
- Volume
- 30
- Issue
- 11
- Pages
- 3275-3283
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2028532392
- Cited by
- 198
- References
- 0
- FWCI
- 26.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.