The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Microfabricated Multiphase Packed-Bed Reactors: Characterization of Mass Transfer and Reactions
Abstract
A microchemical device has been built in silicon and glass by using microfabrication methods including deep-reactive-ion etch technology, photolithography, and multiple wafer bonding. The microchemical system consists of a microfluidic distribution manifold, a microchannel array, and a 25-μm microfilter for immobilizing solid particulate material within the reactor chip and carrying out different heterogeneous chemistries. Multiple reagent streams (specifically, gas and liquid streams) are mixed on-chip, and the fluid streams are brought into contact by a series of interleaved, high-aspect-ratio inlet channels. These inlet channels deliver the reactants continuously and cocurrently to 10 reactor chambers containing standard catalytic particles. The performance of the microfabricated “packed-bed” reactor is compared to that of traditional multiphase packed-bed reactors in terms of fluid flow regimes, pressure drop, and mass transfer. The hydrogenation of cyclohexene is used as a model reaction to measure the mass transfer resistances. Overall mass transfer coefficients ( K L a ) are measured to range from 5 to 15 s -1 nearly 2 orders of magnitude larger than values reported in the literature for standard laboratory-scale reactors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elements of chemical reaction engineering
Scott Fogler, H. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80130-6 · Cited by 3,110
Mass Transfer in Heterogeneous Catalysis
Gibilaro, L. G. (1970) · The Chemical Engineering Journal · doi:10.1016/0300-9467(70)80010-7 · Cited by 1,176
Satterfield, C. N. (1975) · AIChE Journal · doi:10.1002/aic.690210202 · Cited by 490
Gas-liquid-solid reactor design
Shah, Y. T. (1979) · McGraw-Hill eBooks · Cited by 339
Ehrfeld, W., Hessel, V., & Lehr, H. (1998) · Topics in current chemistry · doi:10.1007/3-540-69544-3_10 · Cited by 51
Cited by
Chaotic Mixer for Microchannels
Stroock, A. D., Dertinger, S. K. W., Ajdari, A., Mezić, I., Stone, H. A., & Whitesides, G. M. (2002) · Science · doi:10.1126/science.1066238 · Cited by 3,435
Formation of dispersions using “flow focusing” in microchannels
Anna, S. L., Bontoux, N., & Stone, H. A. (2003) · Applied Physics Letters · doi:10.1063/1.1537519 · Cited by 2,302
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Microreaction engineering — is small better?
Jensen, K. F. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00230-x · Cited by 1,124
Self-citationDeciding Whether To Go with the Flow: Evaluating the Merits of Flow Reactors for Synthesis
Hartman, R. L., McMullen, J. P., & Jensen, K. F. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201004637 · Cited by 999
Self-citation
Metadata
- Authors
- Losey, M. W., Schmidt, M. A., & Jensen, K. F.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-05-11
- Volume
- 40
- Issue
- 12
- Pages
- 2555-2562
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2317676266
- Cited by
- 446
- References
- 5
- FWCI
- 13.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.