The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
PI/PID Controller Design Based on Direct Synthesis and Disturbance Rejection
Abstract
A design method for PID controllers based on the direct synthesis approach and specification of the desired closed-loop transfer function for disturbances is proposed. Analytical expressions for PID controllers are derived for several common types of process models, including first-order and second-order plus time delay models and an integrator plus time delay model. Although the controllers are designed for disturbance rejection, the set-point responses are usually satisfactory and can be tuned independently via a set-point weighting factor. Nine simulation examples demonstrate that the proposed design method results in very good control for a wide variety of processes including those with integrating and/or nonminimum phase characteristics. The simulations show that the proposed design method provides better disturbance rejection than the standard direct synthesis and internal model control methods when the controllers are tuned to have the same degree of robustness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multivariable Feedback Control: Analysis and Design
Skogestad, S., & Postlethwaite, I. (1996) · Cited by 6,312
Optimum Settings for Automatic Controllers
Ziegler, J. G., & Nichols, N. B. (1942) · Journal of Fluids Engineering · doi:10.1115/1.4019264 · Cited by 5,212
Virk, G. S. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)85041-b · Cited by 3,216
Morari, M., & Zafiriou, E. (1988) · International Linear Collider · Cited by 2,735
Optimum Settings for Automatic Controllers
Ziegler, J. G., & Nichols, N. B. (1993) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.2899060 · Cited by 2,460
Simple analytic rules for model reduction and PID controller tuning
Skogestad, S. (2003) · Journal of Process Control · doi:10.1016/s0959-1524(02)00062-8 · Cited by 2,006
(1978) · Chemical & Engineering News Archive · doi:10.1021/cen-v056n033.p045 · Cited by 1,834
Internal model control: PID controller design
Rivera, D. E., Morari, M., & Skogestad, S. (1986) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200032a041 · Cited by 1,611
Internal model control. A unifying review and some new results
Garcia, C. E., & Morari, M. (1982) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200017a016 · Cited by 1,534
Optimum Setting for Automatic Controllers
Zieglar, J. G. (1942) · Medical Entomology and Zoology · Cited by 1,155
(1990) · Choice Reviews Online · doi:10.5860/choice.27-3903 · Cited by 835
Automatic tuning of optimum PID controllers
Zhuang, M., & Atherton, D. P. (1993) · IEE Proceedings D Control Theory and Applications · doi:10.1049/ip-d.1993.0030 · Cited by 671
Tuning of PID controllers based on gain and phase margin specifications
Ho, W. K., Hang, C. C., & Cao, L. S. (1995) · Automatica · doi:10.1016/0005-1098(94)00130-b · Cited by 584
(1959) · Journal of the Franklin Institute · doi:10.1016/0016-0032(59)90057-2 · Cited by 517
(2013) · Linear Control System Analysis and Design with MATLAB · doi:10.1201/b16032-25 · Cited by 328
Autotuning of PID controllers: relay feedback approach
Becerra, V. M. (2000) · Automatica · doi:10.1016/s0005-1098(00)00096-0 · Cited by 252
Hang, C. C., Wang, Q., & Hägglund, T. J. (1999) · Medical Entomology and Zoology · Cited by 159
Cited by
Handbook of Pi and Pid Controller Tuning Rules
O’Dwyer, A. (2006) · IMPERIAL COLLEGE PRESS eBooks · doi:10.1142/9781860949104 · Cited by 1,015
An overview of control performance assessment technology and industrial applications
Jelali, M. (2006) · Control Engineering Practice · doi:10.1016/j.conengprac.2005.11.005 · Cited by 498
Castellanos-Cárdenas, D., Castrillón, F., Vásquez, R. E., Posada, N. L., & Camacho, O. (2022) · Journal of Process Control · doi:10.1016/j.jprocont.2022.05.001 · Cited by 26
Metadata
- Authors
- Chen, D., & Seborg, D. E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-08-16
- Volume
- 41
- Issue
- 19
- Pages
- 4807-4822
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2071625549
- Cited by
- 430
- References
- 17
- FWCI
- 9.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.