Methanol Reforming in Supercritical Water
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The production of hydrogen by the reforming of methanol was studied in a continuously operated tubular reactor made of the nickel-based alloy Inconel 625. Experiments were performed at pressures from 25 to 45 MPa and temperatures in the range of 400−600 °C. The concentration of the aqueous feed varied from 5 to 64 wt % methanol. Residence times under reaction temperature conditions varied in the range from 3 to 100 s. The main component of the product gas is hydrogen, with smaller amounts of carbon dioxide, carbon monoxide, and methane. Methanol conversion is up to 99.9% without addition of a catalyst. Obviously, the heavy metals on the inner surface of the reactor influence the composition of the product gas and the conversion rate. Oxidation of the reactor inner surface before gasification turned out to enhance the reaction rate and to decrease the carbon monoxide concentration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Methanol–steam reforming on Cu/ZnO/Al2O3 catalysts. Part 2. A comprehensive kinetic model
Peppley, B. A., Amphlett, J. C., Kearns, L. M., & Mann, R. F. (1999) · Applied Catalysis A: General · doi:10.1016/s0926-860x(98)00299-3 · Cited by 659
Cited by
An overview of hydrogen production technologies
Holladay, J. D., Hu, J., King, D. L., & Wang, Y. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.08.039 · Cited by 3,447
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Methanol Steam Reforming for Hydrogen Production
Palo, D. R., Dagle, R. A., & Holladay, J. D. (2007) · Chemical Reviews · doi:10.1021/cr050198b · Cited by 1,186
Review of catalytic supercritical water gasification for hydrogen production from biomass
Guo, Y., Wang, S. Z., Xu, D. H., Gong, Y. M., Ma, H. H., & Tang, X. Y. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.08.012 · Cited by 562
Supercritical water gasification
Kruse, A. (2008) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.93 · Cited by 547
A review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534
Hydrothermal biomass gasification
Kruse, A. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.10.009 · Cited by 353
Sınaǧ, A., Kruse, A., & Rathert, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030475+ · Cited by 327
Continuous Flow Organic Synthesis under High‐Temperature/Pressure Conditions
Razzaq, T., & Kappe, C. O. (2010) · Chemistry – An Asian Journal · doi:10.1002/asia.201000010 · Cited by 319
Chemical Reactions of C1 Compounds in Near-Critical and Supercritical Water
Watanabe, M., Sato, T., Inomata, H., Smith, R. L., Arai, K., Kruse, A., & Dinjus, E. (2004) · Chemical Reviews · doi:10.1021/cr020415y · Cited by 282
Self-citationGuo, L., Jin, H., Ge, Z., Lu, Y., & Cao, C. (2015) · Science China Technological Sciences · doi:10.1007/s11431-015-5967-0 · Cited by 114
Metadata
- Authors
- Boukis, N., Diem, V., Habicht, W., & Dinjus, E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-01-24
- Volume
- 42
- Issue
- 4
- Pages
- 728-735
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2033449660
- Cited by
- 127
- References
- 1
- FWCI
- 4.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.