The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Pilot-Scale Pyrolysis of Scrap Tires in a Continuous Rotary Kiln Reactor
Abstract
The pilot-scale pyrolysis of scrap tires in a continuous rotary kiln reactor was investigated at temperatures between 450 and 650 °C. As the reactor temperature increased, the char yield remained constant with a mean of 39.8 wt %. The oil yield reached a maximum value of 45.1 wt % at 500 °C. The pyrolytic derived oils can be used as liquid fuels because of their high heating value (40−42 MJ/kg), excellent viscosity (1.6−3.7 cS), and reasonable sulfur content (0.97−1.54 wt %). The true-boiling-point distillation test showed that there was a 39.2−42.3 wt % light naphtha fraction in the pyrolytic oil. The volatile aromatics were quantified in the naphtha fraction using gas chromatography−mass spectrometry. The maximum concentrations of benzene, toluene, xylene, styrene, and limonene in the oil were 2.09 wt %, 7.24 wt %, 2.13 wt %, and 5.44 wt %, respectively. The abundant presence of aromatic groups was also confirmed by functional group Fourier transform infrared analysis. The concentration of polycyclic aromatic hydrocarbons such as fluorine, phenanthrene, and anthracene increased with increasing temperature. The pyrolytic char was composed of mesopores with a Brunauer−Emmett−Teller (BET) surface area of about 89.1 m 2 /g. The char after carbon dioxide activation had a high BET surface area of 306 m 2 /g at 51.3% burnoff. The relationship between the surface area and the carbon burnoff was almost linear. Both the original pyrolytic char and the activated char have good potential for use as adsorbents of relatively large molecular species.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast pyrolysis processes for biomass
Bridgwater, A. (2000) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(99)00007-6 · Cited by 1,751
Composition of oils derived from the batch pyrolysis of tyres
Cunliffe, A. M., & Williams, P. T. (1998) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00085-5 · Cited by 438
de Marco Rodriguez, I., Laresgoiti, M. F., Cabrero, M. A., Torres, A., Chomón, M. J., & Caballero, B. (2001) · Fuel Processing Technology · doi:10.1016/s0378-3820(01)00174-6 · Cited by 398
The pyrolysis of scrap automotive tyres
Williams, P. T., Besler, S., & Taylor, D. T. (1990) · Fuel · doi:10.1016/0016-2361(90)90193-t · Cited by 378
The vacuum pyrolysis of used tires
Roy, C., Chaala, A., & Darmstadt, H. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00017-0 · Cited by 328
Production of dl-limonene by vacuum pyrolysis of used tires
Pakdel, H., Pantea, D. M., & Roy, C. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00136-4 · Cited by 245
Characterization and potential applications of pyrolytic char from ablative pyrolysis of used tires
Helleur, R., Popovic, N., Ikura, M., Stanciulescu, M., & Liu, D. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00207-2 · Cited by 224
Pyrolysis of mixed plastics into aromatics
Kaminsky, W., & Kim, J.-S. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00012-1 · Cited by 219
Patrick, J. W. (1990) · Fuel · doi:10.1016/0016-2361(90)90053-s · Cited by 210
Recycling of scrap tires to oil and carbon black by vacuum pyrolysis
Roy, C., Labrecque, B., & de Caumia, B. (1990) · Resources, Conservation and Recycling · doi:10.1016/0921-3449(90)90002-l · Cited by 188
Reprocessing of used tires into activated carbon and other products
Teng, H., Serio, M. A., Wojtowicz, M. A., Bassilakis, R., & Solomon, P. R. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00048a023 · Cited by 182
Kaminsky, W., & Mennerich, C. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00129-7 · Cited by 180
Aromatization of tyre pyrolysis oil to yield polycyclic aromatic hydrocarbons
Williams, P. T., & Taylor, D. T. (1993) · Fuel · doi:10.1016/0016-2361(93)90002-j · Cited by 159
Benallal, B., Roy, C., Pakdel, H., Chabot, S., & Poirier, M. A. (1995) · Fuel · doi:10.1016/0016-2361(95)00165-2 · Cited by 155
Combustion of Tyre Pyrolysis Oil
Williams, P. T., Bottrill, R. P., & Cunliffe, A. M. (1998) · Process Safety and Environmental Protection · doi:10.1205/095758298529650 · Cited by 124
Cunliffe, A. M., & Williams, P. T. (1998) · Energy & Fuels · doi:10.1021/ef9801524 · Cited by 124
Pyrolysis of scrap tires and conversion of chars to activated carbon
Merchant, A. A., & Petrich, M. A. (1993) · AIChE Journal · doi:10.1002/aic.690390814 · Cited by 123
Sulfur-polycyclic aromatic hydrocarbons in tyre pyrolysis oil
Williams, P. T., & Bottrill, R. P. (1995) · Fuel · doi:10.1016/0016-2361(94)00005-c · Cited by 116
Pyrolysis of Tire Rubber: Porosity and Adsorption Characteristics of the Pyrolytic Chars
Miguel, G. S., Fowler, G. D., & Sollars, C. J. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970728x · Cited by 112
Characterization of pyrolytic carbon blacks from commercial tire pyrolysis plants
Darmstadt, H., Roy, C., & Kaliaguine, S. (1995) · Carbon · doi:10.1016/0008-6223(95)00096-v · Cited by 111
Formation of dl-limonene in used tire vacuum pyrolysis oils
Pakdel, H., Roy, C., Aubin, H., et al. (1991) · Environmental Science & Technology · doi:10.1021/es00021a018 · Cited by 105
Li, A., Li, X. D., Li, S., Ren, Y., Chi, Y., Yan, J., & Cen, K. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00025-x · Cited by 103
Self-citationImproved Quantitative Determination of Elastomers in Tire Rubber by Kinetic Simulation of DTG Curves
Yang, J., Kaliaguine, S., & Roy, C. (1993) · Rubber Chemistry and Technology · doi:10.5254/1.3538307 · Cited by 99
Chemical recycling of mixed plastics of pyrolysis
Kaminsky, W. (1995) · Advances in Polymer Technology · doi:10.1002/adv.1995.060140407 · Cited by 95
Experimental studies on municipal solid waste pyrolysis in a laboratory-scale rotary kiln
Li, A., Li, X. D., Li, S., Ren, Y., Shang, N., Chi, Y., Yan, J., & Cen, K. (1999) · Energy · doi:10.1016/s0360-5442(98)00095-4 · Cited by 95
Self-citationRheological properties of bitumen modified with pyrolytic carbon black
Chaala, A., Roy, C., & Ait‐Kadi, A. (1996) · Fuel · doi:10.1016/0016-2361(96)00143-3 · Cited by 91
Characterization of used tire vacuum pyrolysis oil: Nitrogenous compounds from the naphtha fraction
Mirmiran, S., Pakdel, H., & Roy, C. (1992) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(92)85014-c · Cited by 87
Kinetic Modeling of Scrap Tire Pyrolysis
Leung, D. Y. C., & Wang, C. L. (1999) · Energy & Fuels · doi:10.1021/ef980124l · Cited by 78
Grittner, N., Kaminsky, W., & Obst, G. (1993) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(93)80048-5 · Cited by 49
Williams, P. T., Beşler, S., & Taylor, D. T. (1993) · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy · doi:10.1243/pime_proc_1993_207_007_02 · Cited by 47
The pyrolysis of automotive tyre waste
(1995) · Fuel and Energy Abstracts · doi:10.1016/0140-6701(95)80589-3 · Cited by 46
Pakdel, H., & Roy, C. (1994) · Journal of Chromatography A · doi:10.1016/s0021-9673(94)89117-6 · Cited by 41
Experiments and mathematical modeling of maize pyrolysis in a rotary kiln
Klose, W., & Wiest, W. (1999) · Fuel · doi:10.1016/s0016-2361(98)00124-0 · Cited by 38
Pyrolysis of Plastic Waste and Scrap Tires Using a Fluidized-Bed Process
Kaminsky, W., & Sinn, H. (1980) · ACS symposium series · doi:10.1021/bk-1980-0130.ch031 · Cited by 37
Axial transport and residence time of MSW in rotary kilns: Part II. Theoretical and optimal analyses
Li, S., Chi, Y., Li, R., Yan, J., & Cen, K. (2002) · Powder Technology · doi:10.1016/s0032-5910(02)00015-3 · Cited by 36
Self-citationPilot-scale experimental pyrolysis plant: Mechanical and operational aspects
Fortuna, F., Cornacchia, G., Mincarini, M., & Sharma, V. K. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00026-0 · Cited by 35
Pyrolysis Process for Scrap Tires
KAWAKAMI, S., Inoue, K., Tanaka, H., et al. (1980) · ACS symposium series · doi:10.1021/bk-1980-0130.ch040 · Cited by 26
An evaluation of discarded tires as a potential source of fuel
Collins, L. W., Downs, W. R., Gibson, E. K., et al. (1974) · Thermochimica Acta · doi:10.1016/0040-6031(74)85034-3 · Cited by 9
Cited by
Martínez, J. D., Puy, N., Murillo, R., García, T., Navarro, M. V., & Mastral, A. M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.02.038 · Cited by 849
Pyrolysis of waste tyres: A review
Williams, P. T. (2013) · Waste Management · doi:10.1016/j.wasman.2013.05.003 · Cited by 807
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Auger reactors for pyrolysis of biomass and wastes
Campuzano, F., Brown, R. C., & Martínez, J. D. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.014 · Cited by 339
Use of pyrolytic gas from waste tire as a fuel: A review
Czajczyńska, D., Krzyżyńska, R., Jouhara, H., & Spencer, N. (2017) · Energy · doi:10.1016/j.energy.2017.05.042 · Cited by 333
Metadata
- Authors
- Li, S.-Q., Yao, Q., Chi, Y., Yan, J.-H., & Cen, K.-F.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-06-29
- Volume
- 43
- Issue
- 17
- Pages
- 5133-5145
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1965062907
- Cited by
- 283
- References
- 38
- FWCI
- 1.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.