The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
A Study on Biocomposites from Recycled Newspaper Fiber and Poly(lactic acid)
Abstract
Recycled newspaper cellulose fiber (RNCF) reinforced poly(lactic acid) (PLA) biocomposites were fabricated by a microcompounding and molding system. RNCF-reinforced polypropylene (PP) composites were also processed with a recycled newspaper fiber content of 30 wt % and were compared to PLA/RNCF composites. The mechanical and thermal−mechanical properties of these composites have been studied and compared to PLA/talc and PP/talc composites. These composites possess similar mechanical properties to talc-filled composites as a result of reinforcement by RNCF. The tensile and flexural modulus of the biocomposites was significantly higher when compared with the virgin resin. The tensile modulus (6.3 GPa) of the PLA/RNCF composite (30 wt % fiber content) was comparable to that of traditional (i.e. polypropylene/talc) composites. The DMA storage modulus and the loss modulus of the RNCF−PLA composites were found to increase, whereas the mechanical loss factor (tan δ) was found to decrease. Differential scanning calorimetry (DSC) thermograms of neat PLA and of the composites exhibit nearly the same glass transition temperatures and melting temperatures. The morphology evaluated by scanning electron microscopy (SEM) indicated good dispersion of RNCF in the PLA matrix. Thermogravimetric analysis (TGA) thermograms reveal the thermal stability of the biocomposites to nearly 350 °C. These findings illustrate that RNCF possesses good thermal properties, compares favorably with talc filler in mechanical properties, and could be a good alternative reinforcement fiber for biopolymer composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Onyon, P. F. (1972) · Polymer · doi:10.1016/0032-3861(72)90126-7 · Cited by 2,225
Comprehensive composite materials
Kelly, A., & Zweben, C. (1999) · Materials Today · doi:10.1016/s1369-7021(99)80033-9 · Cited by 1,352
Bleach, N. C., Nazhat, S. N., Tanner, K. E., Kellomäki, M., & Törmälä, P. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00283-6 · Cited by 281
Amash, A. (2000) · Polymer · doi:10.1016/s0032-3861(99)00273-6 · Cited by 247
Particulate filled polypropylene: structure and properties
Pukánszky, B. (1995) · Springer eBooks · doi:10.1007/978-94-011-0523-1_1 · Cited by 139
Conversion of plastic/cellulose waste into composites. I. Model of the interphase
Hedenberg, P., & Gatenholm, P. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070560601 · Cited by 84
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Self-citationA review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Critical factors on manufacturing processes of natural fibre composites
Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Pei, A., Zhou, Q., & Berglund, L. A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.018 · Cited by 524
Cellulose nanofiber-reinforced polylactic acid
Iwatake, A., Nogi, M., & Yano, H. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.03.006 · Cited by 513
Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites
Yu, T., Ren, J., Li, S., Yuan, H., & Li, Y. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.12.006 · Cited by 485
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
Mofokeng, J. P., Luyt, A. S., Tábi, T., & Kovács, J. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711423291 · Cited by 391
PLA Based Biopolymer Reinforced with Natural Fibre: A Review
Mukherjee, T., & Kao, N. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0320-6 · Cited by 348
Huda, M. S., Drzal, L. T., Misra, M., & Mohanty, A. K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24829 · Cited by 346
Self-citationMechanical and thermal properties of chicken feather fiber/PLA green composites
Cheng, S., Lau, K.-T., Liu, T., Zhao, Y., Lam, P.-M., & Yin, Y. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.04.011 · Cited by 332
Nakagaito, A. N., Fujimura, A., Sakai, T., Hama, Y., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.004 · Cited by 280
Composites of Wood and Biodegradable Thermoplastics: A Review
Chan, C. M., Vandi, L.-J., Pratt, S., Halley, P., Richardson, D., Werker, A., & Laycock, B. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1380039 · Cited by 207
Mechanical and Biodegradable Properties of Jute/Flax Reinforced PLA Composites
Ejaz, M., Azad, M. M., Shah, A. U. R., Afaq, S. K., & Song, J.-I. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-1370-y · Cited by 108
Raja, M., Ryu, S. H., & Shanmugharaj, A. M. (2014) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2014.03.008 · Cited by 66
Valorization of Hemp Hurds as Bio-Sourced Additives in PLA-Based Biocomposites
Momeni, S., Safder, M., Khondoker, M. A. H., & Elias, A. L. (2021) · Polymers · doi:10.3390/polym13213786 · Cited by 40
Yu, T., Ren, J., Gu, S., & Yang, M. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1414 · Cited by 24
Metadata
- Authors
- Huda, M. S., Drzal, L. T., Misra, M., Mohanty, A. K., Williams, K., & Mielewski, D. F.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-06-03
- Volume
- 44
- Issue
- 15
- Pages
- 5593-5601
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1971520852
- Cited by
- 265
- References
- 7
- FWCI
- 6.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.