The DOI matches its Crossref record.
Heat Transfer Characterization of Metallic Foams
Abstract
Gas−solid heat transfer coefficients were determined in open-celled metal foams as part of a study aimed at evaluating the application of metal foams as catalyst supports in gas−solid catalytic processes with short contact times and high reaction rates, typically controlled by diffusional mass transport. Examples of such processes are found in the field of environmental catalysis, including, for example, catalytic combustion, selective catalytic reduction of NO x by NH 3 (SCR-DeNOx), automotive exhaust gas after treatment, and also in the catalytic partial oxidation of hydrocarbons for syngas or H 2 generation processes. In this work, foam samples made of FeCrAlloy and Cu with nominal porosities of 10 and 20 pores per inch (ppi) were characterized by performing non-steady-state cooling measurements. Convective gas−solid heat transfer coefficients were determined by applying a one-dimensional, heterogeneous model of the cooling structure. The correlation Nu = 1.2 Re 0.43 Pr 1/3 well described the dependence of the dimensionless heat transfer coefficients on Re and Pr numbers for all the tests made in a range of flow superficial velocities from 1.2 to 5.7 m/s, independently from the foam cell size (20 < Re < 240). Such a correlation was derived assuming a prismatic idealization of the unit cell and selecting the equivalent strut diameter as the characteristic size of the foams. This expression satisfies the Colburn analogy with the correlation for mass transfer coefficients derived in a previous investigation and resembles semitheoretical literature correlations for heat transfer in flow across banks of tubes at low Reynolds numbers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Xu, H. J., Xing, Z. B., Wang, F. Q., & Cheng, Z. M. (2019) · Chemical Engineering Science · doi:10.1016/j.ces.2018.09.045 · Cited by 410
A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks
Han, X.-H., Wang, Q., Park, Y.-G., T’Joen, C., Sommers, A., & Jacobi, A. (2012) · Heat Transfer Engineering · doi:10.1080/01457632.2012.659613 · Cited by 279
Metadata
- Authors
- Giani, L., Groppi, G., & Tronconi, E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-11-01
- Volume
- 44
- Issue
- 24
- Pages
- 9078-9085
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1995414289
- Cited by
- 163
- References
- 0
- FWCI
- 5.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heat Transfer Characterization of Metallic Foams. https://app.cochat.ai/papers/10.1021/ie050598p
- The paper
- Giani, L., Groppi, G., & Tronconi, E. (2005). Heat Transfer Characterization of Metallic Foams. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie050598p
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.