Propane/Propylene Separation by Pressure Swing Adsorption Using Zeolite 4A
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this work we have studied Pressure Swing Adsorption (PSA) process for separation of propane/propylene mixtures using zeolite 4A extrudates (CECA) as an alternative to distillation. Purified propylene is withdrawn in the blowdown step at 10 kPa because is the most adsorbed compound. The cycle used comprises five steps: pressurization, feed, purge with product, depressurization to intermediate pressure and counter-current blowdown for propylene recovery. Two mixtures with different propylene/propane ratios (54−46 and 85−15 diluted to 50% with nitrogen) corresponding to different sources of propylene production (steam cracking and Fluid Catalytic Cracking) were studied. The effects of the different step times in the performance of the PSA unit were evaluated. PSA performance was also studied using different operating conditions: process temperature and feed pressure. Also, the removal of inert from the process was studied. The simulation of the PSA unit was performed in gPROMS using a bi-LDF approximation for mass transfer. Experimental purities of propylene around 99.0% were obtained. The recovery of propylene in some of the runs reached values higher than 85% which is much higher than 30% obtained in previous studies. The best performance was obtained at 408 K where simulated purity was 99.43% with a recovery of 84.3% and a unit productivity of 2.57 mol/h.kg of zeolite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Olefin/paraffin separation technology: a review
Eldridge, R. B. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00022a002 · Cited by 746
Adsorption Equilibria and Kinetics for Propylene and Propane over 13X and 4A Zeolite Pellets
Da Silva, F. A., & Rodrigues, A. E. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980640z · Cited by 147
Self-citation
Cited by
A metal-organic framework–based splitter for separating propylene from propane
Cadiau, A., Adil, K., Bhatt, P. M., Belmabkhout, Y., & Eddaoudi, M. (2016) · Science · doi:10.1126/science.aaf6323 · Cited by 1,193
Gücüyener, C., van den Bergh, J., Gascon, J., & Kapteijn, F. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1089765 · Cited by 737
Li, B., Cui, X., O'Nolan, D., Wen, H., Jiang, M., Krishna, R., Wu, H., Lin, R., Chen, Y., Yuan, D., et al. (2017) · Advanced Materials · doi:10.1002/adma.201704210 · Cited by 410
Adsorption of Ethane, Ethylene, Propane, and Propylene on a Magnesium-Based Metal–Organic Framework
Bao, Z., Alnemrat, S., Yu, L., Vasiliev, I., Ren, Q., Lu, X., & Deng, S. (2011) · Langmuir · doi:10.1021/la2030473 · Cited by 336
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
“(42)), the resistance of the metal wall to radial heat transfer has been considered in the overall heat transfer coefficient, U, which makes this value lower than that of the individual convection heat transfer coefficient between the wall and the surroundings (Grande and Rodrigues, 2005).”
BackgroundMethod
Metadata
- Authors
- Grande, C. A., & Rodrigues, A. E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-10-15
- Volume
- 44
- Issue
- 23
- Pages
- 8815-8829
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2078559953
- Cited by
- 141
- References
- 2
- FWCI
- 1.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.